ST-ONEMPFully integrated controller for multiport smart chargers | Power Management - Specialized | 2 | Active | The ST-ONEMP is the world’s first digital controller embedding ARM Cortex M0+ core, an offline programmable controller with synchronous rectification, and USB PD PHY in a single package. Such a system is specifically designed to control ZVS non-complementary active clamp flyback converters to create high power density chargers and adapters with a first USB-PD interface and a second output.
The device includes an active clamp flyback controller and its HV startup on the primary side, a microcontroller and all the peripherals required to control the conversion and the USB-PD communication on the secondary side. The two sides are connected through an embedded galvanically isolated dual communication channel. By using a novel non-complementary control technique and specifically designed power modes the device allows to reach both high efficiency and low no load power consumption
The device is delivered with a pre-loaded firmware which handles both the power conversion and the communication protocols for USB-PD including optional PPS and electronically marked cable management.
The output power and available PDOs on the USB-PD port can be changed according to a power sharing pin input to allow power sharing with a second output.
A dedicated memory stores a default device configuration during factory process. The user can change or adapt this memory area to fit the final product specifications. |
| Integrated Circuits (ICs) | 1 | Obsolete | |
ST10F276E16-bit MCU with MAC unit, 832 Kbyte Flash memory and 68 Kbute RAM | Microcontrollers | 22 | Active | The architecture of the ST10F276E combines advantages of both RISC and CISC processors and an advanced peripheral subsystem. The block diagram gives an overview of the different on-chip components and the high bandwidth internal bus structure of the ST10F276E. |
| Embedded | 3 | Obsolete | |
| Filters | 2 | Obsolete | |
ST13003High voltage fast-switching NPN power transistor | Discrete Semiconductor Products | 1 | Active | The device is manufactured using high voltage multi-epitaxial planar technology for high switching speeds and high voltage capability.
It uses a cellular emitter structure with planar edge termination to enhance switching speeds while maintaining the wide RBSOA. |
ST13009High voltage fast-switching NPN power transistor | Single Bipolar Transistors | 1 | Active | The device is manufactured using high voltage multi-epitaxial planar technology for high switching speeds and high voltage capability. It uses a hollow emitter structure to enhance switching speeds. |
ST1480AC3.3V powered, 15kV ESD protected, up to 12Mbps true RS-485/RS-422 transceiver | Integrated Circuits (ICs) | 3 | Active | The ST1480Ax is ±15 kV ESD protected, 3.3 V low power transceiver for RS-485 and RS-422 communications. The device contains one driver and one receiver in half duplex configuration.
The ST1480Ax transmits and receives at a guaranteed data rate of at least 12 Mbps.
All transmitter outputs and receiver inputs are protected to ±15 kV using Human Body Model.
Driver is short-circuit current limited and is protected against excessive power dissipation by
thermal shutdown circuitry that places the driver outputs into a high-impedance state.
The ST1480Ax input has a true fail-safe feature that guarantees a logic high output if both inputs are open circuit, shorted together or in the presence of a termination with no signal on the bus. |
ST1480US3.3V powered, 15kV ESD protected, up to 12Mbps true RS-485/RS-422 transceiver | Interface | 1 | Active | The ST1480US is ±15 kV ESD protected, 3.3 V low power transceiver for RS-485 and RS-422 communications. The device contains one driver and one receiver in half duplex configuration. The ST1480US transmits and receives at a guaranteed data rate of at least 12 Mbps. All transmitter outputs and receiver inputs are protected to ±15 kV using human body model. Driver is short-circuit current limited and is protected against excessive power dissipation by thermal shutdown circuitry that places the driver outputs into a high-impedance state.
The ST1480US input has a true fail-safe feature that guarantees a logic high output if both inputs are open circuit, shorted together or in the presence of a termination with no signal on the bus. |
ST1601010 W, 28 V, HF to 1.6 GHz RF Power LDMOS transistor | Transistors | 1 | Active | The ST16010 is a 10 W, 28 V LDMOS transistor designed for wideband radio, Avionics and ISM applications at frequencies up to 1.6 GHz. |
