ON Semiconductor

NCx57085 is a high current single channel IGBT gate driver with 2.5 kVrms internal galvanic isolation designed for high system efficiency and reliability in high power applications. The driver includes Current Sense function with soft turn off and fault reporting in a narrow body SOIC8 package. NCx57085 accommodates wide range of input bias voltage and signal levels from 3.3 V to 20 V, and wide range of output bias voltage up to 30 V

NCD57090A, NCD57090B, NCD57090C, NCD57090D, NCD57090E and NCD57090F are high−current single channel SiC/MOSFET/IGBT gate drivers with 5 kVrms internal galvanic isolation, designed for high system efficiency and reliability in high power applications. The devices accept complementary inputs and depending on the pin configuration, offer options such as Active Miller Clamp (NCD57090A/D/F), negative power supply (NCD57090B) and separate high and low (OUTH and OUTL) driver outputs (NCD57090C/E) for system design convenience. NCD57090 (A/B/C/D/E/F) accommodate wide range of input bias voltage and signal levels from 3.3 V to 20 V. NCD57090 (A/B/C/D/E/F) are available in wide−body SOIC−8 package.

NCD57100 / NCD57101 are a high−current single channel SiC/IGBT/MOSFET drivers with internal galvanic isolation, designed for high system efficiency and reliability in high power applications. Its features include complementary inputs, open drain FAULT and READY outputs, active MILLER CLAMP, accurate UVLOs, DESAT protection and DESAT diagnostic function, soft turn−off at DESAT, Disable output function and separate high and low (OUTH and OUTL) driver outputs (NCx57100) for system design convenience. NCx5710y accommodates both 5V and 3.3 V signals on the input side and wide bias voltage range on the driver side including negative voltage capability. NCx5710y provides > 5kVrms (UL1577 rating) galvanic isolation and > 1424 VPK (working voltage) capabilities. NCx5710y is available in the wide−body SOIC−16 package with guaranteed 8 mm creepage distance between input and output to fulfill reinforced safety insulation requirements.

NCD(V)57252/3/5/6 are high−current dual-channel isolated IGBT gate drivers with 2.5 or 5 kVrms* internal galvanic isolation from input to each output and functional isolation between the two output channels. The device accepts 3.3 V to 20 V bias voltage and signal levels on the input side and up to 32 V bias voltage on the output side. The device accepts complementary inputs and offers separate pins for Disable and Dead Time control for system design convenience. Drivers are available in wide-body SOIC−16 and narrow-body SOIC−16 packages.

The NCD98010 (unsigned output) ADC product provides an extremely low power solution for analog to digital conversion applications using a capacitor−basedsuccessive−approximation architecture. Optimized for low power andspeed, the NCD98010 can achieve a sample rate of 2 MSPS whileconsuming less than 1 mW of power. The device also features a largeinput voltage range of 1.65V to 3.3V for various applications for both analog and digital supplies. The SPI−compatible interface provides astraight−forward data−acquisition method.

NCG225L75NF8M1 is a 750 V, 224 A rated Field Stop 4 (FS4) Trench IGBT bare die with a die size of 10 mm x 10 mm. it's suitable for back side and double side sintering attachment inside traction module

The NCID9210 and NCID9216 are galvanically isolated fullduplex, bi−directional, high−speed dual−channel digital isolators.These devices support isolated communications thereby allowingdigital signals to communicate between systems without conductingground loops or hazardous voltages.They utilize ON Semiconductor patented galvanic off−chipcapacitor isolation technology and optimized IC design to achievehigh insulation and high noise immunity, characterized by highcommon mode rejection and power supply rejection specifications.The thick ceramic substrate yields capacitors with ~25 times thethickness of thin film on−chip capacitors and coreless transformers.The result is a combination of the electrical performance benefits thatdigital isolators offer with the safety reliability of a >0.5 mm insulatorbarrier similar to what has historically been offered by optocouplers.The device is housed in a 16−pin wide body small outline package.

The NCID9211 is a galvanically isolated full duplex, bi−directional, high−speed dual−channel digital isolator with output enable. This device supports isolated communications thereby allowing digital signals to communicate between systems without conducting ground loops or hazardous voltages. It utilizes onsemi patented galvanic off−chip capacitor isolation technology and optimized IC design to achieve high insulation and high noise immunity, characterized by high common mode rejection and power supply rejection specifications. The thick ceramic substrate yields capacitors with ~25 times the thickness of thin film on−chip capacitors and coreless transformers. The result is a combination of the electrical performance benefits that digital isolators offer with the safety reliability of a >0.5 mm insulator barrier similar to what has historically been offered by optocouplers. The device is housed in a 16−pin wide body small outline package.