Beta

⌘K

O

ON Semiconductor

Series List(12147)

...

...

Series	Category	# Parts	Status	Description

Standalone parts(10272)

...

Part	Category	Description
ON Semiconductor NCV8402AMNWT1G	Integrated Circuits (ICs)	SELF-PROTECTED N-CHANNEL POWER MOSFET/ REEL
ON Semiconductor 74AC32PCObsolete	Integrated Circuits (ICs)	IC GATE OR 4CH 2-INP 14MDIP
ON Semiconductor FGI3236-F085	Discrete Semiconductor Products	IGBT, 360V, 27A, 1.32V, 320MJ, TO-262<BR>ECOSPARK® I, N-CHANNEL IGNITION
ON Semiconductor FAN1655MTFXObsolete	Integrated Circuits (ICs)	IC REG CTRLR DDR 1OUT 16TSSOP
ON Semiconductor FIN1027MObsolete	Integrated Circuits (ICs)	LVDS DRIVER, LVDS DIFFERENTIAL DRIVER, -40 °C, 85 °C, 3 V, 3.6 V, SOIC
ON Semiconductor TMC2111AR3C	Integrated Circuits (ICs)	PIPELINE REGISTER, 8-BIT PQCC28
ON Semiconductor SLV4HC4053ADWRGObsolete	Integrated Circuits (ICs)	LDO REGULATOR, ULTRA-LOW NOISE,
ON Semiconductor FOD4218V	Isolators	OPTOCOUPLER, DIP, 6 PINS, 5 KV, NON ZERO CROSSING, 800 V, FOD4218 SERIES
ON Semiconductor NVMFD5483NLT1GObsolete	Discrete Semiconductor Products	DUAL N-CHANNEL POWER MOSFET 60V, 24A, 36MΩ
ON Semiconductor 2SD1804S-TL-E	Discrete Semiconductor Products	BIP NPN 8A 50V

Series	Category	# Parts	Status	Description

NC7WZ86TinyLogic UHS Dual 2-Input Exclusive-OR Gate	Integrated Circuits (ICs)	2	Active	The NC7WZ86 is a dual 2-Input Exclusive-OR Gate from ON Semiconductor's Ultra High Speed Series of TinyLogic®. The device is fabricated with advanced CMOS technology to achieve ultra high speed with high output drive while maintaining low static power dissipation over a very broad VCCoperating range. The device is specified to operate over the 1.65V to 5.5V VCCrange. The inputs and output are high impedance when VCCis 0V. Inputs tolerate voltages up to 7V independent of VCCoperating voltage.
NC7WZU04TinyLogic UHS Dual Unbuffered Inverter	Logic	2	Active	The NC7WZU04 is a dual unbuffered inverter from ON Semiconductor's Ultra High Speed Series of TinyLogic® in the space saving SC70 6-lead package. The special purpose unbuffered circuit design is intended for crystal oscillator or analog applications. The device is fabricated with advanced CMOS technology to achieve ultra high speed with high output drive while maintaining low static power dissipation over a very broad VCCoperating range. The device is specified to operate over the 1.65V to 5.5V VCCrange. The inputs are high impedance when VCCis 0V. Inputs tolerate voltages up to 7V independent of VCCoperating voltage.
NCD5700IGBT Gate Drivers, High-Current, Stand-Alone	Power Management (PMIC)	1	Active	The NCD5700 is a high-current, high-performance stand-alone IGBT driver for high power applications that include solar inverters, motor control and uninterruptable power supplies. The device offers a cost-effective solution by eliminating many external components. Device protection features include Active Miller Clamp, accurate UVLO, EN input, DESAT protection and Active Low FAULT output. The driver also features an accurate 5.0 V output and separate high and low (VOH and VOL) driver outputs for system design convenience. The driver is designed to accommodate a wide voltage range of bias supplies including unipolar and bipolar voltages. It is available in a 16-pin SOIC package.
NCD57001FDWR2GIsolated high current and high efficiency SiC/MOSFET/IGBT gate driver with internal galvanic isolation	Isolators - Gate Drivers	2	Active	NCD57001FDWR2G is a high−current single channel SiC/MOSFET/IGBT driver with internal galvanic isolation, designed for high system efficiency and reliability in high power applications. Its features include complementary inputs, open drain FAULT and Ready outputs, active Miller clamp, accurate UVLOs, DESAT protection, and soft turn−off at DESAT. NCD57001FDWR2G accommodates both 5 V and 3.3 V signals on the input side and wide bias voltage range on the driver side including negative voltage capability. NCD57001FDWR2G provides > 5 kVrms (UL1577 rating) galvanic isolation and > 1200 Viorm (working voltage) capabilities. NCD57001 is available in the wide−body SOIC−16 package with guaranteed 8 mm creepage distance between input and output to fulfill reinforced safety insulation requirements.
NCD5701IGBT Gate Drivers, High-Current, Stand-Alone	Gate Drivers	2	Active	The NCD5701 series is a set of high-current, high-performance stand-alone IGBT drivers for medium-to-high power applications that include induction heating, welding, solar inverters, motor control and uninterruptable power supplies. The devices offer a cost-effective solution by eliminating many external components. Device protection features include Active Miller Clamp (for NCD5701A), accurate UVLO, DESAT protection and Active Low FAULT output. The drivers also feature an accurate 5.0 V output (for all versions) and separate high and low (VOH and VOL) driver outputs (for NCD5701C only) for system design convenience. The drivers are designed to accommodate a wide voltage range of unipolar bias supplies (and bipolar bias supplies for NCD5701B).All versions are available in an 8-pin SOIC package.
NCD5703IGBT Gate Drivers, High-Current, Stand-Alone, Non-inverting	Power Management (PMIC)	2	Active	The NCD5703 series is a set of high-current, high-performance stand-alone IGBT drivers for medium-to-high power applications that include induction heating, welding, solar inverters, motor control and uninterruptable power supplies. The devices offer a cost-effective solution by eliminating many external components. Device protection features include Active Miller Clamp (for NCD5703A), accurate UVLO, DESAT protection and Active Low FAULT output. The drivers also feature an accurate 5.0 V output (for all versions) and separate high and low (VOH and VOL) driver outputs (for NCD5703C only) for system design convenience. The drivers are designed to accommodate a wide voltage range of unipolar bias supplies (and bipolar bias supplies for NCD5703B).All versions are available in an 8-pin SOIC package.
NCD5705	Power Management (PMIC)	1	Active
NCD57080Isolated High Current Gate Driver	Isolators	2	Active	NCD57080A, NCD57080B and NCD57080C are high−current single channel IGBT gate drivers with 3.75 kVrms internal galvanic isolation, designed for high system efficiency and reliability in high power applications. The devices accept complementary inputs and depending on the pin configuration, offer options such as Active Miller Clamp (NCD57080A), negative power supply (NCD57080B) and separate high and low (OUTH and OUTL) driver outputs (NCD57080C) for system design convenience. NCD57080 (A/B/C) accommodate wide range of input bias voltage and signal levels from 3.3V to 20V. NCD57080 (A/B/C) are available in narrow-body SOIC-8 package.
NCD57081Isolated High Current Gate Driver	Isolators	3	Active	NCD57080A, NCD57080B and NCD57080C are high−current single channel IGBT gate drivers with 3.75 kVrms internal galvanic isolation, designed for high system efficiency and reliability in high power applications. The devices accept complementary inputs and depending on the pin configuration, offer options such as Active Miller Clamp (NCD57080A), negative power supply (NCD57080B) and separate high and low (OUTH and OUTL) driver outputs (NCD57080C) for system design convenience. NCD57080 (A/B/C) accommodate wide range of input bias voltage and signal levels from 3.3V to 20V. NCD57080 (A/B/C) are available in narrow-body SOIC-8 package.
NCD57084Isolated Compact IGBT Gate Driver with DESAT	Isolators - Gate Drivers	1	Active	NCx57084 is a high current single channel IGBT gate driver with 2.5 kVrms internal galvanic isolation designed for high system efficiency and reliability in high power applications. The driver includes DESAT short circuit protection with soft turn off and fault reporting in a narrow body SOIC−8 package. NCx57084 accommodates wide range of input bias voltage and signal levels from 3.3 V to 20 V, and wide range of output bias voltage up to 30 V.