Microchip Technology

The MCP2517FD is a cost-effective and small-footprint External CAN FD Controller that can be easily added to a microcontroller with an available SPI interface. Therefore, a CAN FD channel can be easily added to a microcontroller that is either lacking a CAN FD peripheral or that doesn't have enough CAN FD channels. The MCP2517FD supports both CAN frames in the Classical format (CAN 2.0B) and CAN Flexible Data Rate (CAN FD) format as specified in ISO11898-1:2015. Please see our MikroElektronika click Board! <https://shop.mikroe.com/mcp2517fd-click> Not recommended for new designs. Consider using the pin- and functionally compatible [MCP2518FD](https://www.microchip.com/wwwproducts/en/MCP2518FD) An MCAL driver is available upon request as described here: <https://www.microchip.com/en-us/solutions/automotive-and-transportation/software> Please contact your local Sales representative. The MCP2518FD is supported in the mainline linux kernel since Kernel version 5.10 and can be found [here](https://github.com/torvalds/linux/tree/master/drivers/net/can/spi/mcp251xfd) Backports and an external kernel module can be found [here](https://files.linux4microchip.com/pub/mcp251xfd/)

The MCP251863 device is a cost-effective and small-footprint CAN FD controller (MCP2518FD) with an integrated Transceiver (ATA6563) that can easily be added to a microcontroller with an available SPI interface. A CAN FD channel can be added to a microcontroller that is either lacking a CAN FD peripheral or does not have enough CAN FD channels. The MCP251863 supports both CAN frames in the Classical format (CAN2.0B) and CAN Flexible Data Rate (CAN FD) format, as specified in ISO 11898-1:2015. The integrated transceiver is a high-speed CAN transceiver compliant with the ISO 11898-2, ISO 11898-2: 2016, ISO 11898-5 CAN standards. It provides a very low current consumption in Standby mode and wake-up capability via the CAN bus. Please see our MikroElektronika click Board! [https://shop.mikroe.com/mcp251863-cli](https://shop.mikroe.com/mcp251863-click)[ck](https://shop.mikroe.com/mcp2518fd-click) Please see our functional safety feature page [CAN/CAN FD](https://www.microchip.com/design-centers/can/can-and-can-fd-functional-safety) An MCAL driver is available upon request as described here: <https://www.microchip.com/en-us/solutions/automotive-and-transportation/software> Please contact your local Sales representative. The MCP2518FD is supported in the mainline linux kernel since Kernel version 5.10 and can be found [here](https://github.com/torvalds/linux/tree/master/drivers/net/can/spi/mcp251xfd) Backports and an external kernel module can be found [here](https://files.linux4microchip.com/pub/mcp251xfd/)

The MCP2518FD is a cost-effective and small-footprint External CAN FD Controller that can be easily added to a microcontroller with an available SPI interface. Therefore, a CAN FD channel can be easily added to a microcontroller that is either lacking a CAN FD peripheral or that doesn't have enough CAN FD channels. The MCP2518FD supports both CAN frames in the Classical format (CAN 2.0B) and CAN Flexible Data Rate (CAN FD) format as specified in ISO11898-1:2015. Please see our MikroElektronika click Board! <https://shop.mikroe.com/mcp2518fd-click> Please see our functional safety feature page [CAN/CAN FD](https://www.microchip.com/design-centers/can/can-and-can-fd-functional-safety) An MCAL driver is available upon request as described here: <https://www.microchip.com/en-us/solutions/automotive-and-transportation/software> Please contact your local Sales representative. The MCP2518FD is supported in the mainline linux kernel since Kernel version 5.10 and can be found [here](https://github.com/torvalds/linux/tree/master/drivers/net/can/spi/mcp251xfd) Backports and an external kernel module can be found [here](https://files.linux4microchip.com/pub/mcp251xfd/)

The MCP2542WFD/4WFD CAN transceiver is designed for high-speed CAN FD applications up to 8Mbps communication speed. The maximum propagation delay was improved to support longer bus length.The device meets the automotive requirements for CAN FD bit rates exceeding 2 Mbps, low quiescent current, electromagnetic compatibility (EMC) and electrostatic discharge (ESD). **For 12V- applications please consider the ATA6563** Please see our MikroElektronika click board! http://www.mikroe.com/click/mcp2542

The MCP2544WFD CAN transceiver is designed for high-speed CAN FD applications up to 8Mbps communication speed. The maximum propagation delay was improved to support longer bus length.The device meets the automotive requirements for CAN FD bit rates exceeding 2 Mbps, low quiescent current, electromagnetic compatibility (EMC) and electrostatic discharge (ESD). **For 12V applications please consider the ATA6560**

The MCP2557/8FD is a Microchip Technology Inc. high-speed CAN transceiver/CAN Flexible Data Rate Transceiver with Silent Mode. The devices meet and exceed CAN FD specification requirements in addition to the latest Automotive OEM requirements. The device family members are MCP2557FD with No Connect pin 5 & MCP2558FD with VIO pin (internal level shifting)

The MCP2557/8FD is a Microchip Technology Inc. high-speed CAN transceiver/CAN Flexible Data Rate Transceiver with Silent Mode. The devices meet and exceed CAN FD specification requirements in addition to the latest Automotive OEM requirements. The device family members are MCP2557FD with No Connect pin 5 & MCP2558FD with VIO pin (internal level shifting) **For 12V applications please consider the ATA6564**

The MCP25612FD is a second generation, dual CAN transceiver from Microchip Technology Inc. The device supports both Classic CAN and CAN Flexible Data-rate (CAN FD) physical layer requirements allowing designs the ability to serve CAN systems today while preparing for future CAN FD system requirements. The device meets the automotive requirements for CAN FD bit rates exceeding 2 Mbps, low quiescent current, Electromagnetic Compatibility (EMC) and Electrostatic Discharge (ESD).

The MCP2561/2FD is a Microchip Technology Inc. second generation high-speed CAN transceiver. It offers the same features as the MCP2561/2. Additionally, it guarantees Loop Delay Symmetry in order to support the higher data rates required for CAN FD. The maximum propagation delay was improved to support longer bus length. The device meets the automotive requirements for CAN FD bit rates exceeding 5 Mbps, low quiescent current, electromagnetic compatibility (EMC) and electrostatic discharge (ESD). The device family members are MCP2561FD with SPLIT pin & MCP2562FD with VIO pin.