MCP2561FD Series

High-speed CAN FD Transceiver with Standby Mode and SPLIT Pin

Catalog

High-speed CAN FD Transceiver with Standby Mode and SPLIT Pin

Part	Type	Protocol	Duplex	Receiver Hysteresis	Package / Case	Package / Case [y]	Package / Case [x]	Mounting Type	Supplier Device Package	Voltage - Supply [Min]	Voltage - Supply [Max]	Package / Case	Package / Case	Data Rate	Operating Temperature [Max]	Operating Temperature [Min]
Microchip Technology MCP2561T-H/SN	Transceiver	CANbus	Half	200 mV	8-SOIC	3.9 mm	0.154 in	Surface Mount	8-SOIC	4.5 V	5.5 V
Microchip Technology MCP2561FD-H/P	Transceiver	CANbus		200 mV	8-DIP			Through Hole	8-PDIP	4.5 V	5.5 V	0.3 in	7.62 mm	8 Mbps
Microchip Technology MCP2561FD-E/SN	Transceiver	CANbus		200 mV	8-SOIC	3.9 mm	0.154 in	Surface Mount	8-SOIC	4.5 V	5.5 V			8 Mbps	125 °C	-40 °C
Microchip Technology MCP2561T-H/MF	Transceiver	CANbus	Half	200 mV	8-VDFN Exposed Pad			Surface Mount	8-DFN (3x3)	4.5 V	5.5 V
Microchip Technology MCP2561FDT-H/MF	Transceiver	CANbus		200 mV	8-VDFN Exposed Pad			Surface Mount	8-DFN (3x3)	4.5 V	5.5 V			8 Mbps
Microchip Technology MCP2561FDT-E/MF	Transceiver	CANbus		200 mV	8-VDFN Exposed Pad			Surface Mount	8-DFN (3x3)	4.5 V	5.5 V			8 Mbps	125 °C	-40 °C
Microchip Technology MCP2561FD-E/MF	Transceiver	CANbus		200 mV	8-VDFN Exposed Pad			Surface Mount	8-DFN (3x3)	4.5 V	5.5 V			8 Mbps	125 °C	-40 °C
Microchip Technology MCP2561-H/MF	Transceiver	CANbus	Half		8-VDFN Exposed Pad			Surface Mount	8-DFN (3x3)	4.5 V	5.5 V
Microchip Technology MCP2561FD-H/MF	Transceiver	CANbus		200 mV	8-VDFN Exposed Pad			Surface Mount	8-DFN (3x3)	4.5 V	5.5 V			8 Mbps
Microchip Technology MCP2561-E/SN	Transceiver	CANbus	Half		8-SOIC	3.9 mm	0.154 in	Surface Mount	8-SOIC	4.5 V	5.5 V				125 °C	-40 °C

Catalog

High-speed CAN FD Transceiver with Standby Mode and SPLIT Pin

Key Features

• * Maximum Propagation Delay: 120 ns

• * Loop Delay Symmetry: -10%/+10% (2 Mbps)

• * Implements ISO-11898-2 and ISO-11898-5 Standard Physical Layer Requirements

• * AEC-Q100 Grade 0

• * Very Low Standby Current (5 μA, typical)

• * VIO Supply Pin to Interface Directly to CAN Controllers and Microcontrollers with 1.8V to 5.5V I/O

• * SPLIT Output Pin to Stabilize Common Mode in Biased Split Termination Schemes

• * An Unpowered Node or Brown-Out Event will Not Load the CAN Bus

• * Permanent Dominant Detection on TXD

• * Permanent Dominant Detection on Bus

• * Power-on Reset and Voltage Brown-Out Protection on VDD Pin

• * Protection Against Damage Due to Short-Circuit Conditions (Positive or Negative Battery Voltage)

• * Protection Against High-Voltage Transients in Automotive Environments

• * Automatic Thermal Shutdown Protection

• * Suitable for 12V and 24V Systems

• * Radiated emissions @ 2 Mbps with Common Mode Choke (CMC)

• * DPI @ 2 Mbps with CMC

• * High ESD Protection on CANH and CANL, meeting IEC61000-4-2 up to ±14 kV

• * Available in PDIP-8L, SOIC-8L and 3x3 DFN-8L

• * Extended (E): -40°C to +125°C

• * High (H): -40°C to +150°C

Description

The MCP2561/2FD is a Microchip Technology Inc. second generation high-speed CAN transceiver. It offers the same features as the MCP2561/2. Additionally, it guarantees Loop Delay Symmetry in order to support the higher data rates required for CAN FD. The maximum propagation delay was improved to support longer bus length. The device meets the automotive requirements for CAN FD bit rates exceeding 5 Mbps, low quiescent current, electromagnetic compatibility (EMC) and electrostatic discharge (ESD). The device family members are MCP2561FD with SPLIT pin & MCP2562FD with VIO pin.