| Integrated Circuits (ICs) | 38 | Active | The Microchip's SAM4CMS16 is a system-on-chip solution for residential and single-phase metering applications up to class 0.2 metrology accuracy over a dynamic range of 3000:1 and industrial temperature range. A seamless extension of Atmel's SAM4 family and SAM4C family of microcontrollers and solutions for smart grid security and communications applications, this metrology enabled device offer an unprecedented level of integration and flexibility with dual 32-bit ARM®Cortex®-M4 RISC processors providing maximum speed of 120 MHz each, 1024Kbytes of embedded Flash, 152 Kbytes of SRAM and on-chip cache.
The unique dual ARM Cortex-M4 architecture supports implementation of signal processing, application and communications firmware in independent partitions and offers an ability to extend program and data memory via parallel external bus interface (EBI) to ensure scalability of the design to meet future requirements. |
| Microcontrollers | 2 | Active | |
| Embedded MCU, DSP Evaluation Boards | 1 | Obsolete | |
| Embedded | 25 | Active | ***For New Designs, we highly recommend to consider Revision B for Prototypes and Production.***
An ARM® Cortex®-M4 processor-based microcontroller (MCU), the SAM4E8E features a floating point unit and a high data bandwidth architecture and is targeted at industrial automation and building control applications.
The device embeds 512KB Flash and features multiple networking/connectivity peripherals, including two 2.0A/B compatible CAN interfaces and an IEEE Std 1588-compatible 10/100Mbps Ethernet MAC.
Additional communication interfaces include a FS USB device, a HS SDCard/SDIO/MMC interface, USARTs, SPIs and multiple TWIs.
Analog features includes dual 1Msps, 16-bit ADCs of up to 24 channels with analog front end offering offset and gain error correction, and a 2-channel, 1Msps, 12-bit DAC.
The SAM4E8E is available in 144-pin BGA and QFP package options. |
| Embedded | 30 | Active | A member of the Microchip's SAM4L family of flash microcontrollers based on the ARM® Cortex®-M4 processor, the ATSAM4LC4A delivers the lowest power in active mode (90uA/MHz) as well as sleep mode (1.5uA) and the shortest wake-up time (down to 1.5us) in a Cortex-M4-based device.
Along with 256KB of embedded flash memory, the device features an LCD controller, hardware cryptography, USB host and device, peripheral event system, SleepWalking intelligent peripherals, and built-in security, including 128-bit Advanced Encryption Standard (AES).
Integrated Microchip QTouch technology makes it easy to bring capacitive touch functionality to your hardware. |
| Microcontrollers | 25 | Active | A member of the Microchip's SAM4L family of Flash microcontrollers based on the ARM® Cortex®?-M4 processor, the ATSAM4LS2B delivers the lowest power in active mode (90uA/MHz) as well as sleep mode (1.5uA) and the shortest wake-up time (down to 1.5us) in a Cortex-M4 device. Along with 128KB of embedded Flash, the device features a USB device, peripheral event system and SleepWalking intelligent peripherals. Integrated Microchip QTouch technology makes it easy to bring capacitive touch functionality to your hardware. |
| Microcontrollers | 14 | Active | Microchip's ATSAMN16C ARM® Cortex®-M4-based microcontroller runs at 100MHz and features 1MB of flash memory and 80KB of SRAM.
Peripherals include seven USARTs, four SPIs and three I2Cs for fast serial communication, as well as a 16-channel 12-bit ADC, a 10-bit DAC, PWM, timers and RTC.
The device operates from 1.62V to 3.6V and is available in 100-pin QFP, TFBGA and VFBGA packages.
Pin-to-pin
compatible with SAM3N, SAM3S products (48/64/100-pin versions), SAM4S
(64/100-pin versions) and SAM7S legacy products (64-pin version) |
| Microcontrollers | 72 | Active | The Microchip's ARM®-based SAM4S8 microcontroller builds on the high-performance 32-bit ARM®-based Cortex®-M4 core. The SAM4S8 features:
* Maximum operating speed of 120MHz
* 512KB of flash memory and 128KB of SRAM
* 1.62V to 3.6V supply
* Power consumption 200µA/MHz in dynamic mode at low operating frequency, 30mA at 100MHz and 3µA at 1.8V in back-up mode with the RTC running
* External bus interface supports SRAM, PSRAM, NOR Flash, LCD module and NAND Flash
* Extensive peripheral set for connectivity, system control and analog interfacing
* Native support for Microchip QTouch™ capacitive touch technology for implementation of buttons, sliders and wheels
* Pin-to-pin compatible with Microchip SAM7S, SAM3N and SAM3S MCUs
* Parallel Input/Output (IO) data capture mode
Get started with your application development now with the SAM4S evaluation kit, integrating a comprehensive development tool and software package. To reduce your time-to-market, Microchip and industry-leading third parties provide a worldwide support ecosystem. |
| Microcontrollers | 15 | Active | ***For New Designs, we highly recommend to consider Revision B for Prototypes and Production.***
**Support for the SAM4SA16C within Microchip Studio 6.1 requires a device support package: DOWNLOAD**
Microchip's ARM®-based SAM4SA16 microcontroller builds on the high-performance 32-bit Cortex®-M4 core.
The SAM4SA16 features:
* 1MB of flash memory and 160KB of SRAM
* 2KB of integrated cache memory
* Maximum operating speed of 120MHz
* Best-in-class power consumption: 200uA/MHz in active mode, down to 3uA at 1.8V in back-up mode with the RTC running
* 1.62V to 3.6V power supply
* Extensive peripheral set for connectivity, system control and analog interfacing
* Pin-to-pin compatible with Microchip SAM7S, SAM3N and SAM3S MCUs
* Supported by Microchip Studio, Microchip Software Framework and the SAM4S-EK2 |
| Embedded | 32 | Active | ***For New Designs, we highly recommend to consider Revision B for Prototypes and Production.***
Microchip's ARM®-based SAM4SD16 microcontroller builds on the high-performance 32-bit Cortex®-M4 core.
The SAM4SD16 features:
* 2x512KB of flash memory and 160KB of SRAM
* 2KB of integrated cache memory
* Maximum operating speed of 120MHz
* Dual-bank Flash
* Best-in-class power consumption: 200uA/MHz in active mode, down to 3uA at 1.8V in back-up mode with the RTC running
* 1.62V to 3.6V power supply
* Extensive peripheral set for connectivity, system control and analog interfacing
* Pin-to-pin compatible with Microchip SAM7S, SAM3N and SAM3S MCUs
* Supported by Microchip Studio, Microchip Software Framework and the SAM4S-EK2 |
