A
Analog Devices
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
| Part | Spec A | Spec B | Spec C | Spec D | Description |
|---|---|---|---|---|---|
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
| Part | Spec A | Spec B | Spec C | Spec D | Description |
|---|---|---|---|---|---|
| Part | Category | Description |
|---|---|---|
Analog Devices ADM6713RAKSZ-REELObsolete | Integrated Circuits (ICs) | IC SUPERVISOR 1 CHANNEL SC70-4 |
Analog Devices | RF and Wireless | RF AMP SINGLE GENERAL PURPOSE RF AMPLIFIER 20GHZ 3.6V 22-PIN DIE TRAY |
Analog Devices | Integrated Circuits (ICs) | LOW NOISE, SWITCHED CAPACITOR REGULATED VOLTAGE INVERTERS |
Analog Devices | Integrated Circuits (ICs) | QUAD 16-BIT/12-BIT ±10V VOUTSOFTSPAN DACS WITH 10PPM/°C MAX REFERENCE |
Analog Devices | Integrated Circuits (ICs) | SERIAL 14-BIT, 3.5MSPS SAMPLING ADC WITH BIPOLAR INPUTS |
Analog Devices | Integrated Circuits (ICs) | ISOSPI ISOLATED COMMUNICATIONS INTERFACE |
Analog Devices | Integrated Circuits (ICs) | 4.5A, 500KHZ STEP-DOWN SWITCHING REGULATOR |
Analog Devices | Integrated Circuits (ICs) | 300 MA, LOW QUIESCENT CURRENT, ADJUSTABLE OUTPUT, CMOS LINEAR REGULATOR |
Analog Devices AD767KNObsolete | Integrated Circuits (ICs) | IC DAC 12BIT V-OUT 24DIP |
Analog Devices | Integrated Circuits (ICs) | QUAD 12-/10-/8-BIT RAIL-TO-RAIL DACS WITH 10PPM/°C REFERENCE |
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
| Analog Switches, Multiplexers, Demultiplexers | 4 | Active | ||
| Interface | 1 | Obsolete | ||
ADG821<1 Ω, Low Voltage (1.8 V - 5.5 V) Dual SPST Switches - Normally Open | Analog Switches, Multiplexers, Demultiplexers | 2 | Active | The ADG821 /ADG822/ADG823are monolithic CMOS single-pole, single-throw (SPST) switches. These switches are designed on an advanced submicron process that provides low power dissipation, yet gives high switching speed, low on resistance, and low leakage currents.The ADG821 / ADG822 / ADG823 are designed to operate from a single 1.8 V to 5.5 V supply, making them ideal for use in battery-powered instruments. Each switch of the ADG821 / ADG822 / ADG823 conducts equally well in both directions when on. The ADG821 / ADG822 / ADG823 contain two independent SPST switches. The ADG821 and ADG822 differ only in that both switches are normally open and normally closed, respectively. In the ADG823, Switch 1 is normally open and Switch 2 is normally closed. The ADG823 exhibits break-before-make switching action.The ADG821 / ADG822 / ADG823 are available in an 8-lead MSOP.APPLICATIONSPower routingBattery-powered systemsCommunication systemsData acquisition systemsAudio and video signal routingCellular phonesModemsPCMCIA cardsHard drivesRelay replacement |
ADG822<1 Ω CMOS, 1.8 V to 5.5 V, Dual SPST Switches | Interface | 2 | Active | TheADG821/ ADG822 /ADG823are monolithic CMOS single-pole, single-throw (SPST) switches. These switches are designed on an advanced submicron process that provides low power dissipation, yet gives high switching speed, low on resistance, and low leakage currents.The ADG821 / ADG822 / ADG823 are designed to operate from a single 1.8 V to 5.5 V supply, making them ideal for use in battery-powered instruments. Each switch of the ADG821 / ADG822 / ADG823 conducts equally well in both directions when on. The ADG821 / ADG822 / ADG823 contain two independent SPST switches. The ADG821 and ADG822 differ only in that both switches are normally open and normally closed, respectively. In the ADG823, Switch 1 is normally open and Switch 2 is normally closed. The ADG823 exhibits break-before-make switching action.The ADG821 / ADG822 / ADG823 are available in an 8-lead MSOP.PRODUCT HIGHLIGHTSVery Low On Resistance: 0.5 Ω typ.On Resistance Flatness (RFLAT(ON)): 0.15 Ω typ.Automotive Temperature Range: −40°C to +125°C.Current Carrying Capability: 200 mA.Low Power Dissipation. CMOS construction ensures low power dissipation.8-Lead MSOP.APPLICATIONSPower routingBattery-powered systemsCommunication systemsData acquisition systemsAudio and video signal routingCellular phonesModemsPCMCIA cardsHard drivesRelay replacement |
ADG823<1 Ω, Low Voltage (1.8 V - 5.5 V) Dual SPST Switches | Analog Switches, Multiplexers, Demultiplexers | 2 | Active | TheADG821/ADG822/ ADG823 are monolithic CMOS single-pole, single-throw (SPST) switches. These switches are designed on an advanced submicron process that provides low power dissipation, yet gives high switching speed, low on resistance, and low leakage currents.The ADG821 / ADG822 / ADG823 are designed to operate from a single 1.8 V to 5.5 V supply, making them ideal for use in battery-powered instruments.Each switch of the ADG821 / ADG822 / ADG823 conducts equally well in both directions when on. The ADG821 / ADG822 / ADG823 contain two independent SPST switches. The ADG821 and ADG822 differ only in that both switches are normally open and normally closed, respectively. In the ADG823, Switch 1 is normally open and Switch 2 is normally closed. The ADG823 exhibits break-before-make switching action.The ADG821 / ADG822 / ADG823 are available in an 8-lead MSOP.ApplicationsPower routingBattery-powered systemsCommunication systemsData acquisition systemsAudio and video signal routingCellular phonesModemsPCMCIA cardsHard drivesRelay replacement |
ADG8240.5 Ω CMOS 1.65 V to 3.6 V Dual SPDT/2:1 Mux in Mini LFCSP Package | Integrated Circuits (ICs) | 1 | Active | The ADG824 is a low voltage CMOS device containing two independently selectable single-pole, double throw (SPDT) switches. This device offers ultralow on resistance of less than 0.85 Ω over the full temperature range. The ADG824 is fully specified for 3.3 V, 2.5 V, and 1.8 V supply operation.Each switch conducts equally well in both directions when on, and has an input signal range that extends to the supplies. The ADG824 exhibits break-before-make switching action.The low on resistance of the ADG824 makes this device ideal for audio switching. In addition, a data rate of 180 Mbps makes the device suitable for USB low speed (1.5 Mbps) and full speed (12 Mbps) data switching.The ADG824 is available in a 1.3 mm × 1.6 mm, 10-lead mini LFCSP package.PRODUCT HIGHLIGHTS<0.85 Ω over the full temperature range of –40°C to +85°C.Single 1.65 V to 3.6 V operation.1.8 V logic compatible.High current carrying capability (300 mA continuous current at 3.3 V).Low THD + N (0.06% typical).1.3 mm × 1.6 mm mini LFCSP package.APPLICATIONSCellular phonesPDAsMP3 playersPower routingBattery-powered systemsPCMCIA cardsModemsAudio and video signal routingCommunication systems |
| Integrated Circuits (ICs) | 5 | Active | ||
ADG8390.35 Ω CMOS 1.65 V to 3.6 V Single SPDT Switch/2:1 MUX | Integrated Circuits (ICs) | 2 | Active | The ADG839 is a low voltage CMOS device containing a single-pole, double-throw (SPDT) switch. This device offers ultralow on resistance of less than 0.6 Ω over the full temperature range. The ADG839 is fully specified for 1.8 V, 2.5 V, and 3.3 V supply operation.Each switch conducts equally well in both directions when on and has an input signal range that extends to the supplies. The ADG839 exhibits break-before-make switching action.The ADG839 is available in a 6-lead SC70 package.PRODUCT HIGHLIGHTS0.6 Ω over full temperature range of –40°C to +125°C.Compatible with 1.8 V CMOS logic.High current handling capability (300 mA continuous current at 3.3 V).Low THD + N (0.01% typ).Tiny SC70 package.APPLICATIONSCellular phonesPDAsMP3 playersPower routingBattery-powered systemsPCMCIA cardsModemsAudio and video signal routingCommunication systems |
ADG8410.28 Ω CMOS 1.65 V to 3.6 V Single SPST Switches in SC70 Closed for a Logic 1 Input | Integrated Circuits (ICs) | 2 | Active | The ADG841 andADG842are low voltage CMOS devices containing a single-pole, single-throw (SPST) switch. The ADG841 is closed for a Logic 1 input and the ADG842 is open for a Logic 1 input. The devices offer ultralow on resistance of less than 0.48 Ω over the full temperature range. The ADG841 / ADG842 are fully specified for 3.3 V, 2.5 V, and 1.8 V supply operation.Each switch conducts equally well in both directions when on, and has an input signal range that extends to the supplies. The ADG841 / ADG842 exhibit break-before-make switching action.The ADG841 / ADG842 are available in a 6-lead SC70 package.PRODUCT HIGHLIGHTS<0.48 Ω over full temperature range of –40°C to +125°C.Compatible with 1.8 V CMOS logic.High current handling capability (300 mA continuous current at 3.3 V).Low THD + N (0.02% typ).Tiny SC70 package.APPLICATIONSHandsetsPDAsMP3 PlayersPower RoutingBattery-powered SystemsCommunication SystemsModemsPCMCIA Cards |
ADG8420.28 Ω CMOS 1.65 V to 3.6 V Single SPST Switches in SC70 Open for a Logic 1 Input | Interface | 1 | Obsolete | TheADG841and ADG842 are low voltage CMOS devices containing a single-pole, single-throw (SPST) switch. The ADG841 is closed for a Logic 1 input and the ADG842 is open for a Logic 1 input. The devices offer ultralow on resistance of less than 0.48 Ω over the full temperature range. The ADG841 / ADG842 are fully specified for 3.3 V, 2.5 V, and 1.8 V supply operation.Each switch conducts equally well in both directions when on, and has an input signal range that extends to the supplies. The ADG841 / ADG842 exhibit break-before-make switching action.The ADG841 / ADG842 are available in a 6-lead SC70 package.PRODUCT HIGHLIGHTS<0.48 Ω over full temperature range of –40°C to +125°C.Compatible with 1.8 V CMOS logic.High current handling capability (300 mA continuous current at 3.3 V).Low THD + N (0.02% typ).Tiny SC70 package.APPLICATIONSHandsetsPDAsMP3 PlayersPower RoutingBattery-powered SystemsCommunication SystemsModemsPCMCIA Cards |