SN75ALS160DWR
ActiveOCTAL GENERAL-PURPOSE INTERFACE BUS TRANSCEIVER
Deep-Dive with AI
Search across all available documentation for this part.
SN75ALS160DWR
ActiveOCTAL GENERAL-PURPOSE INTERFACE BUS TRANSCEIVER
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | SN75ALS160DWR |
|---|---|
| Duplex | Half |
| Mounting Type | Surface Mount |
| Number of Drivers/Receivers [custom] | 8 |
| Number of Drivers/Receivers [custom] | 8 |
| Operating Temperature [Max] | 70 °C |
| Operating Temperature [Min] | 0 °C |
| Package / Case | 20-SOIC |
| Package / Case [y] | 0.295 in |
| Package / Case [y] | 7.5 mm |
| Protocol | IEEE 488 |
| Receiver Hysteresis | 650 mV |
| Supplier Device Package | 20-SOIC |
| Type | Transceiver |
| Voltage - Supply [Max] | 5.25 V |
| Voltage - Supply [Min] | 4.75 V |
SN75ALS160 Series
Octal General-Purpose Interface Bus Transceiver
| Part | Operating Temperature [Max] | Operating Temperature [Min] | Number of Drivers/Receivers [custom] | Number of Drivers/Receivers [custom] | Package / Case | Package / Case | Package / Case | Protocol | Mounting Type | Type | Voltage - Supply [Min] | Voltage - Supply [Max] | Receiver Hysteresis | Duplex | Supplier Device Package | Package / Case [y] | Package / Case [y] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 Texas Instruments | 70 °C | 0 °C | 8 | 8 | 20-DIP | 7.62 mm | 0.3 in | IEEE 488 | Through Hole | Transceiver | 4.75 V | 5.25 V | 650 mV | Half | 20-PDIP | ||
Texas Instruments | 70 °C | 0 °C | 8 | 8 | 20-SOIC | IEEE 488 | Surface Mount | Transceiver | 4.75 V | 5.25 V | 650 mV | Half | 20-SOIC | 0.295 in | 7.5 mm | ||
Texas Instruments | 70 °C | 0 °C | 8 | 8 | 20-SOIC | IEEE 488 | Surface Mount | Transceiver | 4.75 V | 5.25 V | 650 mV | Half | 20-SOIC | 0.295 in | 7.5 mm | ||
Texas Instruments | 70 °C | 0 °C | 8 | 8 | 20-SOIC | IEEE 488 | Surface Mount | Transceiver | 4.75 V | 5.25 V | 650 mV | Half | 20-SOIC | 0.295 in | 7.5 mm |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 2.76 | |
| 10 | $ 2.48 | |||
| 25 | $ 2.35 | |||
| 100 | $ 2.03 | |||
| 250 | $ 1.93 | |||
| 500 | $ 1.73 | |||
| 1000 | $ 1.46 | |||
| Digi-Reel® | 1 | $ 2.76 | ||
| 10 | $ 2.48 | |||
| 25 | $ 2.35 | |||
| 100 | $ 2.03 | |||
| 250 | $ 1.93 | |||
| 500 | $ 1.73 | |||
| 1000 | $ 1.46 | |||
| Tape & Reel (TR) | 2000 | $ 1.39 | ||
| 6000 | $ 1.34 | |||
| Texas Instruments | LARGE T&R | 1 | $ 2.40 | |
| 100 | $ 2.10 | |||
| 250 | $ 1.47 | |||
| 1000 | $ 1.19 | |||
Description
General part information
SN75ALS160 Series
The SN75ALS160 eight-channel general-purpose interface bus transceivers are monolithic, high-speed, advanced low-power Schottky (ALS) devices designed for two-way data communications over single-ended transmission lines. This device is designed to meet the requirements of IEEE Standard 488-1978. The transceivers feature driver outputs that can be operated in either the passive-pullup or 3-state mode. If talk enable (TE) is high, these ports have the characteristics of passive-pullup outputs when pullup enable (PE) is low and of 3-state outputs when PE is high. Taking TE low places these ports in the high-impedance state. The driver outputs are designed to handle loads up to 48 mA of sink current.
An active turn-off feature has been incorporated into the bus-terminating resistors so that the device exhibits a high impedance to the bus when VCC= 0. When combined with the SN75ALS161 or SN75ALS162 bus management transceiver, the pair provides the complete 16-wire interface for the IEEE-488 bus.
The SN75ALS160 is characterized for operation from 0°C to 70°C.
Documents
Technical documentation and resources