SN75ALS160N
ActiveBUS XCVR SINGLE 8-CH 3-ST/OPEN COLLECTOR 20-PIN PDIP TUBE
Deep-Dive with AI
Search across all available documentation for this part.
SN75ALS160N
ActiveBUS XCVR SINGLE 8-CH 3-ST/OPEN COLLECTOR 20-PIN PDIP TUBE
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | SN75ALS160N |
|---|---|
| Duplex | Half |
| Mounting Type | Through Hole |
| Number of Drivers/Receivers [custom] | 8 |
| Number of Drivers/Receivers [custom] | 8 |
| Operating Temperature [Max] | 70 °C |
| Operating Temperature [Min] | 0 °C |
| Package / Case | 20-DIP |
| Package / Case | 7.62 mm |
| Package / Case | 0.3 in |
| Protocol | IEEE 488 |
| Receiver Hysteresis | 650 mV |
| Supplier Device Package | 20-PDIP |
| Type | Transceiver |
| Voltage - Supply [Max] | 5.25 V |
| Voltage - Supply [Min] | 4.75 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Tube | 300 | $ 3.28 | |
| Texas Instruments | TUBE | 1 | $ 3.96 | |
| 100 | $ 3.47 | |||
| 250 | $ 2.43 | |||
| 1000 | $ 1.96 | |||
Description
General part information
SN75ALS160 Series
The SN75ALS160 eight-channel general-purpose interface bus transceivers are monolithic, high-speed, advanced low-power Schottky (ALS) devices designed for two-way data communications over single-ended transmission lines. This device is designed to meet the requirements of IEEE Standard 488-1978. The transceivers feature driver outputs that can be operated in either the passive-pullup or 3-state mode. If talk enable (TE) is high, these ports have the characteristics of passive-pullup outputs when pullup enable (PE) is low and of 3-state outputs when PE is high. Taking TE low places these ports in the high-impedance state. The driver outputs are designed to handle loads up to 48 mA of sink current.
An active turn-off feature has been incorporated into the bus-terminating resistors so that the device exhibits a high impedance to the bus when VCC= 0. When combined with the SN75ALS161 or SN75ALS162 bus management transceiver, the pair provides the complete 16-wire interface for the IEEE-488 bus.
The SN75ALS160 is characterized for operation from 0°C to 70°C.
Documents
Technical documentation and resources
