Integrated Circuits (ICs)

SN75ALS160DWRE4

Unknown

Texas Instruments

BUS XCVR SINGLE 8-CH 3-ST/OPEN COLLECTOR 20-PIN SOIC T/R

Deep-Dive with AI

Search across all available documentation for this part.

Integrated Circuits (ICs)

SN75ALS160DWRE4

Unknown

Texas Instruments

BUS XCVR SINGLE 8-CH 3-ST/OPEN COLLECTOR 20-PIN SOIC T/R

Deep-Dive with AI

Specifications Series Pricing Description Documents

Technical Specifications

Parameters and characteristics for this part

Specification	SN75ALS160DWRE4

Duplex	Half
Mounting Type	Surface Mount
Number of Drivers/Receivers [custom]	8
Number of Drivers/Receivers [custom]	8
Operating Temperature [Max]	70 °C
Operating Temperature [Min]	0 °C
Package / Case	20-SOIC
Package / Case [y]	0.295 in
Package / Case [y]	7.5 mm
Protocol	IEEE 488
Receiver Hysteresis	650 mV
Supplier Device Package	20-SOIC
Type	Transceiver
Voltage - Supply [Max]	5.25 V
Voltage - Supply [Min]	4.75 V

SN75ALS160 Series

Octal General-Purpose Interface Bus Transceiver

Part	Operating Temperature [Max]	Number of Drivers/Receivers [custom]	Number of Drivers/Receivers [custom]	Package / Case	Package / Case	Package / Case	Protocol	Mounting Type	Type	Voltage - Supply [Min]	Voltage - Supply [Max]	Receiver Hysteresis	Duplex	Supplier Device Package	Package / Case [y]	Package / Case [y]
Texas Instruments SN75ALS160N	70 °C	8	8	20-DIP	7.62 mm	0.3 in	IEEE 488	Through Hole	Transceiver	4.75 V	5.25 V	650 mV	Half	20-PDIP
Texas Instruments SN75ALS160DWRG4	70 °C	8	8	20-SOIC			IEEE 488	Surface Mount	Transceiver	4.75 V	5.25 V	650 mV	Half	20-SOIC	0.295 in	7.5 mm
Texas Instruments SN75ALS160DWRE4	70 °C	8	8	20-SOIC			IEEE 488	Surface Mount	Transceiver	4.75 V	5.25 V	650 mV	Half	20-SOIC	0.295 in	7.5 mm
Texas Instruments SN75ALS160DWR	70 °C	8	8	20-SOIC			IEEE 488	Surface Mount	Transceiver	4.75 V	5.25 V	650 mV	Half	20-SOIC	0.295 in	7.5 mm

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Tape & Reel (TR)	2000	$ 1.60
		6000	$ 1.54

Description

General part information

SN75ALS160 Series

The SN75ALS160 eight-channel general-purpose interface bus transceivers are monolithic, high-speed, advanced low-power Schottky (ALS) devices designed for two-way data communications over single-ended transmission lines. This device is designed to meet the requirements of IEEE Standard 488-1978. The transceivers feature driver outputs that can be operated in either the passive-pullup or 3-state mode. If talk enable (TE) is high, these ports have the characteristics of passive-pullup outputs when pullup enable (PE) is low and of 3-state outputs when PE is high. Taking TE low places these ports in the high-impedance state. The driver outputs are designed to handle loads up to 48 mA of sink current.

An active turn-off feature has been incorporated into the bus-terminating resistors so that the device exhibits a high impedance to the bus when VCC= 0. When combined with the SN75ALS161 or SN75ALS162 bus management transceiver, the pair provides the complete 16-wire interface for the IEEE-488 bus.

The SN75ALS160 is characterized for operation from 0°C to 70°C.

Documents

Technical documentation and resources

No documents available