Integrated Circuits (ICs)

SN75ALS160DWRG4

Unknown

Texas Instruments

OCTAL GENERAL-PURPOSE INTERFACE BUS TRANSCEIVER

Deep-Dive with AI

Search across all available documentation for this part.

DocumentsSN75ALS160 datasheet (Rev. E)

Integrated Circuits (ICs)

SN75ALS160DWRG4

Unknown

Texas Instruments

OCTAL GENERAL-PURPOSE INTERFACE BUS TRANSCEIVER

Deep-Dive with AI

DocumentsSN75ALS160 datasheet (Rev. E)

Specifications Series Pricing Description Documents

Technical Specifications

Parameters and characteristics for this part

Specification	SN75ALS160DWRG4

Duplex	Half
Mounting Type	Surface Mount
Number of Drivers/Receivers [custom]	8
Number of Drivers/Receivers [custom]	8
Operating Temperature [Max]	70 °C
Operating Temperature [Min]	0 °C
Package / Case	20-SOIC
Package / Case [y]	0.295 in
Package / Case [y]	7.5 mm
Protocol	IEEE 488
Receiver Hysteresis	650 mV
Supplier Device Package	20-SOIC
Type	Transceiver
Voltage - Supply [Max]	5.25 V
Voltage - Supply [Min]	4.75 V

SN75ALS160 Series

Octal General-Purpose Interface Bus Transceiver

Part	Operating Temperature [Max]	Number of Drivers/Receivers [custom]	Number of Drivers/Receivers [custom]	Package / Case	Package / Case	Package / Case	Protocol	Mounting Type	Type	Voltage - Supply [Min]	Voltage - Supply [Max]	Receiver Hysteresis	Duplex	Supplier Device Package	Package / Case [y]	Package / Case [y]
Texas Instruments SN75ALS160N	70 °C	8	8	20-DIP	7.62 mm	0.3 in	IEEE 488	Through Hole	Transceiver	4.75 V	5.25 V	650 mV	Half	20-PDIP
Texas Instruments SN75ALS160DWRG4	70 °C	8	8	20-SOIC			IEEE 488	Surface Mount	Transceiver	4.75 V	5.25 V	650 mV	Half	20-SOIC	0.295 in	7.5 mm
Texas Instruments SN75ALS160DWRE4	70 °C	8	8	20-SOIC			IEEE 488	Surface Mount	Transceiver	4.75 V	5.25 V	650 mV	Half	20-SOIC	0.295 in	7.5 mm
Texas Instruments SN75ALS160DWR	70 °C	8	8	20-SOIC			IEEE 488	Surface Mount	Transceiver	4.75 V	5.25 V	650 mV	Half	20-SOIC	0.295 in	7.5 mm

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Tape & Reel (TR)	2000	$ 1.60
		6000	$ 1.54
Texas Instruments	LARGE T&R	1	$ 2.76
		100	$ 2.42
		250	$ 1.70
		1000	$ 1.37

Description

General part information

SN75ALS160 Series

The SN75ALS160 eight-channel general-purpose interface bus transceivers are monolithic, high-speed, advanced low-power Schottky (ALS) devices designed for two-way data communications over single-ended transmission lines. This device is designed to meet the requirements of IEEE Standard 488-1978. The transceivers feature driver outputs that can be operated in either the passive-pullup or 3-state mode. If talk enable (TE) is high, these ports have the characteristics of passive-pullup outputs when pullup enable (PE) is low and of 3-state outputs when PE is high. Taking TE low places these ports in the high-impedance state. The driver outputs are designed to handle loads up to 48 mA of sink current.

An active turn-off feature has been incorporated into the bus-terminating resistors so that the device exhibits a high impedance to the bus when VCC= 0. When combined with the SN75ALS161 or SN75ALS162 bus management transceiver, the pair provides the complete 16-wire interface for the IEEE-488 bus.

The SN75ALS160 is characterized for operation from 0°C to 70°C.

Documents

Technical documentation and resources

SN75ALS160 datasheet (Rev. E)

Data sheet