MCP9800A5T-M/OT
ActiveDIGITAL TEMP SENSOR-SERIAL, 12BIT(S), 3CEL, RECTANGULAR, SURFACE MOUNT, PLASTIC, SC-74A, SOT-23, 5 PIN
Deep-Dive with AI
Search across all available documentation for this part.
MCP9800A5T-M/OT
ActiveDIGITAL TEMP SENSOR-SERIAL, 12BIT(S), 3CEL, RECTANGULAR, SURFACE MOUNT, PLASTIC, SC-74A, SOT-23, 5 PIN
Technical Specifications
Parameters and characteristics for this part
| Specification | MCP9800A5T-M/OT |
|---|---|
| Accuracy - Highest (Lowest) | 1 °C, 3 °C |
| Features | Programmable Resolution, One-Shot, Programmable Limit, Shutdown Mode, Output Switch |
| Mounting Type | Surface Mount |
| Operating Temperature [Max] | 125 °C |
| Operating Temperature [Min] | -55 °C |
| Output Type | I2C/SMBus |
| Package / Case | SC-74A, SOT-753 |
| Resolution | 11 b |
| Sensing Temperature - Local [Max] | 125 °C |
| Sensing Temperature - Local [Min] | -55 ¯C |
| Sensor Type | Digital, Local |
| Supplier Device Package | SOT-23-5 |
| Test Condition [Max] | 85 °C |
| Test Condition [Max] | 125 °C |
| Test Condition [Min] | -10 °C |
| Test Condition [Min] | -55 °C |
| Voltage - Supply [Max] | 5.5 V |
| Voltage - Supply [Min] | 2.7 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 1.48 | |
| 25 | $ 1.24 | |||
| 100 | $ 1.13 | |||
| Digi-Reel® | 1 | $ 1.48 | ||
| 25 | $ 1.24 | |||
| 100 | $ 1.13 | |||
| Tape & Reel (TR) | 3000 | $ 1.13 | ||
| Microchip Direct | T/R | 1 | $ 1.48 | |
| 25 | $ 1.24 | |||
| 100 | $ 1.13 | |||
| 1000 | $ 1.08 | |||
| 5000 | $ 1.07 | |||
| Newark | Each (Supplied on Cut Tape) | 1 | $ 1.54 | |
| 10 | $ 1.41 | |||
| 25 | $ 1.29 | |||
| 50 | $ 1.24 | |||
| 100 | $ 1.18 | |||
Description
General part information
MCP9800 Series
The MCP9800 is a digital temperature sensor capable of reading temperatures from -55°C to +125°C. Temperature data is measured from an integrated temperature sensor and converted to digital word with a user selectable 9 to 12-bit Sigma Delta Analog to Digital Converter.
The MCP9800 notifies the host controller when the ambient temperature exceeds a user programmed set point. The ALERT output is programmable as either a simple comparator for thermostat operation or as a temperature event interrupt. Communication with the sensor is accomplished via a two-wire bus that is compatible with industry standard protocols. This permits reading the current temperature, programming the set point and hysteresis and configuring the device.
Small physical size, low installed cost and ease of use
Documents
Technical documentation and resources
