T
Texas Instruments
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
| Part | Spec A | Spec B | Spec C | Spec D | Description |
|---|---|---|---|---|---|
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
| Part | Spec A | Spec B | Spec C | Spec D | Description |
|---|---|---|---|---|---|
| Part | Category | Description |
|---|---|---|
Texas Instruments BQ2002CSNTRG4Unknown | Integrated Circuits (ICs) | LINEAR BATTERY CHARGER NICD/NIMH 2000MA 0V TO 6V 8-PIN SOIC T/R |
Texas Instruments LM3676SDX-3.3Obsolete | Integrated Circuits (ICs) | IC REG BUCK 3.3V 600MA 8WSON |
Texas Instruments | Integrated Circuits (ICs) | TMX320DRE311 179PIN UBGA 200MHZ |
Texas Instruments UCC3580N-1G4Obsolete | Integrated Circuits (ICs) | IC REG CTRLR FWRD CONV 16DIP |
Texas Instruments LM2831YMF EVALObsolete | Development Boards Kits Programmers | EVAL BOARD FOR LM2831 |
Texas Instruments | Integrated Circuits (ICs) | BUFFER/LINE DRIVER 8-CH NON-INVERTING 3-ST CMOS 20-PIN SSOP T/R |
Texas Instruments | Integrated Circuits (ICs) | ANALOG OTHER PERIPHERALS |
Texas Instruments | Integrated Circuits (ICs) | RADIATION-HARDENED, QMLP 60V HAL |
Texas Instruments SN75LVDS051DRObsolete | Integrated Circuits (ICs) | IC TRANSCEIVER FULL 2/2 16SOIC |
Texas Instruments | Integrated Circuits (ICs) | AUTOMOTIVE OCTAL D-TYPE FLIP-FLO |
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
| Power Management (PMIC) | 1 | Unknown | ||
| Power Management (PMIC) | 2 | Active | ||
| Power Management (PMIC) | 1 | Active | ||
| Voltage Regulators - Linear, Low Drop Out (LDO) Regulators | 4 | Active | ||
| Evaluation Boards | 11 | Active | ||
| Voltage Regulators - Linear, Low Drop Out (LDO) Regulators | 1 | Unknown | ||
| Voltage Regulators - Linear, Low Drop Out (LDO) Regulators | 10 | Active | ||
TPS78225Automotive 150-mA, nano-IQ, low-dropout voltage regulator with enable | Voltage Regulators - Linear, Low Drop Out (LDO) Regulators | 4 | Active | The TPS782xx family of low-dropout regulators (LDOs) offers the benefits of ultra-low power (IQ= 1 µA), and miniaturized packaging (2-mm×2-mm SON).
This LDO is designed specifically for battery-powered applications where ultra-low quiescent current is a critical parameter. The TPS782, with ultra-low IQ(1 µA), is ideal for microprocessors, memory cards, and smoke detectors.
The ultra-low power and miniaturized packaging allow designers to customize power consumption for specific applications. Consult with your local factory representative for exact voltage options and ordering information; minimum order quantities may apply.
The TPS782xx family is designed to be compatible with the TI MSP430 and other similar products. The enable pin (EN) is compatible with standard CMOS logic. This LDO is stable with any output capacitor greater than 1.0 µF. Therefore, this device requires minimal board space because of miniaturized packaging and a potentially small output capacitor. The TPS782xx series also features thermal shutdown and current limit to protect the device during fault conditions. The devices have an operating temperature range of TJ= –40°C to 125°C. For high-performance applications that require a dual-level voltage option, consider the TPS780 series, with an IQof 500 nA and dynamic voltage scaling.
The TPS782xx family of low-dropout regulators (LDOs) offers the benefits of ultra-low power (IQ= 1 µA), and miniaturized packaging (2-mm×2-mm SON).
This LDO is designed specifically for battery-powered applications where ultra-low quiescent current is a critical parameter. The TPS782, with ultra-low IQ(1 µA), is ideal for microprocessors, memory cards, and smoke detectors.
The ultra-low power and miniaturized packaging allow designers to customize power consumption for specific applications. Consult with your local factory representative for exact voltage options and ordering information; minimum order quantities may apply.
The TPS782xx family is designed to be compatible with the TI MSP430 and other similar products. The enable pin (EN) is compatible with standard CMOS logic. This LDO is stable with any output capacitor greater than 1.0 µF. Therefore, this device requires minimal board space because of miniaturized packaging and a potentially small output capacitor. The TPS782xx series also features thermal shutdown and current limit to protect the device during fault conditions. The devices have an operating temperature range of TJ= –40°C to 125°C. For high-performance applications that require a dual-level voltage option, consider the TPS780 series, with an IQof 500 nA and dynamic voltage scaling. |
TPS78227Automotive 150-mA, nano-IQ, low-dropout voltage regulator with enable | Development Boards, Kits, Programmers | 6 | Active | The TPS782xx family of low-dropout regulators (LDOs) offers the benefits of ultra-low power (IQ= 1 µA), and miniaturized packaging (2-mm×2-mm SON).
This LDO is designed specifically for battery-powered applications where ultra-low quiescent current is a critical parameter. The TPS782, with ultra-low IQ(1 µA), is ideal for microprocessors, memory cards, and smoke detectors.
The ultra-low power and miniaturized packaging allow designers to customize power consumption for specific applications. Consult with your local factory representative for exact voltage options and ordering information; minimum order quantities may apply.
The TPS782xx family is designed to be compatible with the TI MSP430 and other similar products. The enable pin (EN) is compatible with standard CMOS logic. This LDO is stable with any output capacitor greater than 1.0 µF. Therefore, this device requires minimal board space because of miniaturized packaging and a potentially small output capacitor. The TPS782xx series also features thermal shutdown and current limit to protect the device during fault conditions. The devices have an operating temperature range of TJ= –40°C to 125°C. For high-performance applications that require a dual-level voltage option, consider the TPS780 series, with an IQof 500 nA and dynamic voltage scaling.
The TPS782xx family of low-dropout regulators (LDOs) offers the benefits of ultra-low power (IQ= 1 µA), and miniaturized packaging (2-mm×2-mm SON).
This LDO is designed specifically for battery-powered applications where ultra-low quiescent current is a critical parameter. The TPS782, with ultra-low IQ(1 µA), is ideal for microprocessors, memory cards, and smoke detectors.
The ultra-low power and miniaturized packaging allow designers to customize power consumption for specific applications. Consult with your local factory representative for exact voltage options and ordering information; minimum order quantities may apply.
The TPS782xx family is designed to be compatible with the TI MSP430 and other similar products. The enable pin (EN) is compatible with standard CMOS logic. This LDO is stable with any output capacitor greater than 1.0 µF. Therefore, this device requires minimal board space because of miniaturized packaging and a potentially small output capacitor. The TPS782xx series also features thermal shutdown and current limit to protect the device during fault conditions. The devices have an operating temperature range of TJ= –40°C to 125°C. For high-performance applications that require a dual-level voltage option, consider the TPS780 series, with an IQof 500 nA and dynamic voltage scaling. |
TPS78228Automotive 150-mA, nano-IQ, low-dropout voltage regulator with enable | Integrated Circuits (ICs) | 6 | Active | The TPS782xx family of low-dropout regulators (LDOs) offers the benefits of ultra-low power (IQ= 1 µA), and miniaturized packaging (2-mm×2-mm SON).
This LDO is designed specifically for battery-powered applications where ultra-low quiescent current is a critical parameter. The TPS782, with ultra-low IQ(1 µA), is ideal for microprocessors, memory cards, and smoke detectors.
The ultra-low power and miniaturized packaging allow designers to customize power consumption for specific applications. Consult with your local factory representative for exact voltage options and ordering information; minimum order quantities may apply.
The TPS782xx family is designed to be compatible with the TI MSP430 and other similar products. The enable pin (EN) is compatible with standard CMOS logic. This LDO is stable with any output capacitor greater than 1.0 µF. Therefore, this device requires minimal board space because of miniaturized packaging and a potentially small output capacitor. The TPS782xx series also features thermal shutdown and current limit to protect the device during fault conditions. The devices have an operating temperature range of TJ= –40°C to 125°C. For high-performance applications that require a dual-level voltage option, consider the TPS780 series, with an IQof 500 nA and dynamic voltage scaling.
The TPS782xx family of low-dropout regulators (LDOs) offers the benefits of ultra-low power (IQ= 1 µA), and miniaturized packaging (2-mm×2-mm SON).
This LDO is designed specifically for battery-powered applications where ultra-low quiescent current is a critical parameter. The TPS782, with ultra-low IQ(1 µA), is ideal for microprocessors, memory cards, and smoke detectors.
The ultra-low power and miniaturized packaging allow designers to customize power consumption for specific applications. Consult with your local factory representative for exact voltage options and ordering information; minimum order quantities may apply.
The TPS782xx family is designed to be compatible with the TI MSP430 and other similar products. The enable pin (EN) is compatible with standard CMOS logic. This LDO is stable with any output capacitor greater than 1.0 µF. Therefore, this device requires minimal board space because of miniaturized packaging and a potentially small output capacitor. The TPS782xx series also features thermal shutdown and current limit to protect the device during fault conditions. The devices have an operating temperature range of TJ= –40°C to 125°C. For high-performance applications that require a dual-level voltage option, consider the TPS780 series, with an IQof 500 nA and dynamic voltage scaling. |