| Gates and Inverters | 10 | Active | The SN74AHC1G00 performs the Boolean function Y = A • B or Y = A + B in positive logic.
The SN74AHC1G00 performs the Boolean function Y = A • B or Y = A + B in positive logic. |
| Gates and Inverters | 1 | Active | The SN74AHC1G00-Q1 performs the Boolean function Y = A• B or Y = A + B in positive logic.
The SN74AHC1G00-Q1 performs the Boolean function Y = A• B or Y = A + B in positive logic. |
| Integrated Circuits (ICs) | 9 | Active | This device contains a single 2-input NOR gate that performs the Boolean function Y = A × B or Y = A + B in positive logic.
This device contains a single 2-input NOR gate that performs the Boolean function Y = A × B or Y = A + B in positive logic. |
| Logic | 15 | Active | The SN74AHC1G04-Q1 contains one inverter gate. The device performs the Boolean function Y = A.
The SN74AHC1G04-Q1 contains one inverter gate. The device performs the Boolean function Y = A. |
| Integrated Circuits (ICs) | 15 | Active | The SN74AHC1G08 device is a single 2-input positive-AND gate. The device performs the Boolean function Y = A ● B or Y = A + B in positive logic.
The SN74AHC1G08 device is a single 2-input positive-AND gate. The device performs the Boolean function Y = A ● B or Y = A + B in positive logic. |
SN74AHC1G091-ch, 2-input 2-V to 5.5-V high-speed (9 ns) AND gate with open-drain outputs | Integrated Circuits (ICs) | 1 | Active | The SN74AHC1G09 is a single 2-input positive-AND gate with an open drain output configuration. The device performs the Boolean logic Y = A × B in positive logic.
The SN74AHC1G09 is a single 2-input positive-AND gate with an open drain output configuration. The device performs the Boolean logic Y = A × B in positive logic. |
SN74AHC1G09-Q1Automotive, 1-ch, 2-input 2-V to 5.5-V high-speed (9 ns) AND gate with open-drain outputs | Integrated Circuits (ICs) | 2 | Active | The SN74AHC1G09-Q1 is a single 2-input positive-AND gate with an open drain output configuration. The device performs the Boolean logic Y = A × B in positive logic.
The SN74AHC1G09-Q1 is a single 2-input positive-AND gate with an open drain output configuration. The device performs the Boolean logic Y = A × B in positive logic. |
| Integrated Circuits (ICs) | 9 | Active | The SN74AHC1G125 device is a single bus buffer gate/line driver with 3-state output. The output is disabled when the output-enable (OE) input is high. When OE is low, true data is passed from the A input to the Y output.
The SN74AHC1G125 device is a single bus buffer gate/line driver with 3-state output. The output is disabled when the output-enable (OE) input is high. When OE is low, true data is passed from the A input to the Y output. |
SN74AHC1G125-Q1Automotive, 1-ch 2.0-V to 5.5-V non-inverting buffer with 3-state output | Logic | 2 | Active | The SN74AHC1G125-Q1 is a single buffer gate with 3-state outputs and integrated voltage translation. This buffer performs the Boolean function Y = A in positive logic. The outputs can be placed into a Hi-Z state by applying a High on the OE pin.
The SN74AHC1G125-Q1 is a single buffer gate with 3-state outputs and integrated voltage translation. This buffer performs the Boolean function Y = A in positive logic. The outputs can be placed into a Hi-Z state by applying a High on the OE pin. |
SN74AHC1G126-EPEnhanced product single 2-V to 5.5-V buffer with 3-state outputs | Logic | 10 | Active | The SN74AHC1G126 is a single bus buffer gate and line driver with 3-state output. The output is disabled when the output-enable (OE) input is low. When OE is high, true data is passed from the A input to the Y output.
To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.
The SN74AHC1G126 is a single bus buffer gate and line driver with 3-state output. The output is disabled when the output-enable (OE) input is low. When OE is high, true data is passed from the A input to the Y output.
To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver. |
