SN74AC595-Q1Automotive 1.5V to 6V eight-bit shift registers with tri-state output registers | Uncategorized | 1 | Active | The SN74AC595-Q1 contains an 8-bit serial-in, parallel-out shift register that feeds an 8-bit D-type storage register. This configuration allows data to be loaded into the shift register while the outputs remain static. The device includes 3-state outputs to allow for disabling the outputs. The device has a separate shift register output (QH’) for connecting shift registers in series.
The SN74AC595-Q1 contains an 8-bit serial-in, parallel-out shift register that feeds an 8-bit D-type storage register. This configuration allows data to be loaded into the shift register while the outputs remain static. The device includes 3-state outputs to allow for disabling the outputs. The device has a separate shift register output (QH’) for connecting shift registers in series. |
SN74AC74-EPEnhanced Product Dual Positive-Edge-Triggered D-Type Flip-Flops With Clear And Preset | Flip Flops | 12 | Active | The SN74AC74 is a dual positive-edge-triggered D-type flip-flop.
A low level at the preset (PRE)\ or clear (CLR)\ input sets or resets the outputs, regardless of the levels of the other inputs. When PRE\ and CLR\ are inactive (high), data at the data (D) input meeting the setup-time requirements is transferred to the outputs on the positive-going edge of the clock pulse. Clock triggering occurs at a voltage level and is not directly related to the rise time of the clock pulse. Following the hold-time interval, data at D can be changed without affecting the levels at the outputs.
The SN74AC74 is a dual positive-edge-triggered D-type flip-flop.
A low level at the preset (PRE)\ or clear (CLR)\ input sets or resets the outputs, regardless of the levels of the other inputs. When PRE\ and CLR\ are inactive (high), data at the data (D) input meeting the setup-time requirements is transferred to the outputs on the positive-going edge of the clock pulse. Clock triggering occurs at a voltage level and is not directly related to the rise time of the clock pulse. Following the hold-time interval, data at D can be changed without affecting the levels at the outputs. |
SN74AC7541Eight-channel 1.5V-to-6V buffers with open-drain outputs | Buffers, Drivers, Receivers, Transceivers | 3 | Active | The SN74AC7541 contains eight independent buffers with open-drain outputs. All channels can be simultaneously forced into the high-impedance state using either of the output enable inputs (OE1 or OE2).
The SN74AC7541 contains eight independent buffers with open-drain outputs. All channels can be simultaneously forced into the high-impedance state using either of the output enable inputs (OE1 or OE2). |
SN74AC7541-Q1Automotive eight-channel 1.5V-to-6V buffers with open-drain outputs | Buffers, Drivers, Receivers, Transceivers | 2 | Active | The SN74AC7541-Q1 contains eight independent buffers with open-drain outputs. All channels can be simultaneously forced into the high-impedance state using either of the output enable inputs (OE1 or OE2).
The SN74AC7541-Q1 contains eight independent buffers with open-drain outputs. All channels can be simultaneously forced into the high-impedance state using either of the output enable inputs (OE1 or OE2). |
SN74AC8541Eight-channel 1.5V-to-6V buffers with Schmitt-trigger inputs | Logic | 2 | Active | The SN74AC8541 contains eight independent logic buffers with Schmitt-trigger inputs. The outputs can simultaneously be put into the high-impedance state using either of the provided output enable pins (OE1 or OE2).
The SN74AC8541 contains eight independent logic buffers with Schmitt-trigger inputs. The outputs can simultaneously be put into the high-impedance state using either of the provided output enable pins (OE1 or OE2). |
SN74AC8541-Q1Automotive eight-channel 1.5V-to-6V buffers with Schmitt-trigger inputs | Integrated Circuits (ICs) | 3 | Active | The SN74AC8541-Q1 contains eight independent logic buffers with Schmitt-trigger inputs. The outputs can simultaneously be put into the high-impedance state using either of the provided output enable pins (OE1 or OE2).
The SN74AC8541-Q1 contains eight independent logic buffers with Schmitt-trigger inputs. The outputs can simultaneously be put into the high-impedance state using either of the provided output enable pins (OE1 or OE2). |
SN74AC864-ch, 2-input, 1.5-V to 5.5-V XOR (exclusive OR) gates | Gates and Inverters | 10 | Active | The ’AC86 devices are quadruple 2-input exclusive-OR gates. The devices perform the Boolean function Y = A ⊕ B or Y = AB + AB in positive logic.
A common application is as a true/complement element. If one of the inputs is low, the other input is reproduced in true form at the output. If one of the inputs is high, the signal on the other input is reproduced inverted at the output.
The ’AC86 devices are quadruple 2-input exclusive-OR gates. The devices perform the Boolean function Y = A ⊕ B or Y = AB + AB in positive logic.
A common application is as a true/complement element. If one of the inputs is low, the other input is reproduced in true form at the output. If one of the inputs is high, the signal on the other input is reproduced inverted at the output. |
SN74ACT00-Q1Automotive, 4-ch, 2-input, 4.5V to 5.5V NAND gates with TTL-compatible CMOS inputs | Logic | 12 | Active | The ‘ACT00 devices contain four independent 2-input NAND gates. Each gate performs the Boolean function of Y = A•B or Y = A+B in positive logic.
The ‘ACT00 devices contain four independent 2-input NAND gates. Each gate performs the Boolean function of Y = A•B or Y = A+B in positive logic. |
SN74ACT04-EPEnhanced product 6-ch, 4.5-V to 5.5-V inverters with TTL-compatible CMOS inputs | Gates and Inverters | 12 | Active | The ’ACT04 devices contain six independent inverters. The devices perform the Boolean function Y = A.
The ’ACT04 devices contain six independent inverters. The devices perform the Boolean function Y = A. |
SN74ACT10-Q1Automotive 3-ch, 3-input, 4.5-V to 5.5-V NAND gates with TTL-compatible CMOS inputs | Integrated Circuits (ICs) | 13 | Active | The SN74ACT10 device contains three independent 3-input NAND gates. The device performs the Boolean functions Y = A • B • C or Y = A + B + C in positive logic.
The SN74ACT10 device contains three independent 3-input NAND gates. The device performs the Boolean functions Y = A • B • C or Y = A + B + C in positive logic. |
