CD4541BPW
ActiveCMOS PROGRAMMABLE TIMER - HIGH VOLTAGE TYPE (20V RATING)
Deep-Dive with AI
Search across all available documentation for this part.
CD4541BPW
ActiveCMOS PROGRAMMABLE TIMER - HIGH VOLTAGE TYPE (20V RATING)
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | CD4541BPW |
|---|---|
| Count | 65536 |
| Frequency | 100 kHz |
| Mounting Type | Surface Mount |
| Operating Temperature [Max] | 125 °C |
| Operating Temperature [Min] | -55 °C |
| Package / Case | 14-TSSOP |
| Package / Case [custom] | 0.173 " |
| Package / Case [custom] | 4.4 mm |
| Supplier Device Package | 14-TSSOP |
| Type | Programmable Timer |
| Voltage - Supply [Max] | 20 V |
| Voltage - Supply [Min] | 3 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Arrow | N/A | 90 | $ 0.51 | |
| 270 | $ 0.49 | |||
| Digikey | Tube | 1 | $ 1.17 | |
| 10 | $ 1.04 | |||
| 90 | $ 0.81 | |||
| 270 | $ 0.76 | |||
| 540 | $ 0.67 | |||
| 1080 | $ 0.53 | |||
| 2520 | $ 0.49 | |||
| 5040 | $ 0.47 | |||
| Texas Instruments | TUBE | 1 | $ 1.07 | |
| 100 | $ 0.73 | |||
| 250 | $ 0.56 | |||
| 1000 | $ 0.37 | |||
Description
General part information
CD4541B Series
CD4541B programmable timer consists of a 16-stage binary counter, an oscillator that is controlled by external R-C components (2 resistors and a capacitor), an automatic power-on reset circuit, and output control logic. The counter increments on positive-edge clock transitions and can also be reset via the MASTER RESET input.
The output from this timer is the Q or Q\ output from the 8th, 10th, 13th, or 16th counter stage. The desired stage is chosen using time-select inputs A and B (see Frequency Select Table).
The output is available in either of two modes selectable via the MODE input, pin 10 (see Truth Table). When this MODE input is a logic "1", the output will be a continuous square wave having a frequency equal to the oscillator frequency divided by 2N. With the MODE input set to logic "0" and after a MASTER RESET is initiated, the output (assuming Q output has been selected) changes from a low to a high state after 2N-1counts and remains in that state until another MASTER RESET pulse is applied or the MODE input is set to a logic "1".
Documents
Technical documentation and resources
