Specification	SN74LVTH244ARGYR

Current - Output High, Low [custom]	64 mA
Current - Output High, Low [custom]	32 mA
Logic Type	Buffer, Non-Inverting
Mounting Type	Surface Mount
Number of Bits per Element	4
Number of Elements	2
Operating Temperature [Max]	85 °C
Operating Temperature [Min]	-40 °C
Output Type	3-State
Package / Case	20-VFQFN Exposed Pad
Supplier Device Package	20-VQFN (3.5x4.5)
Voltage - Supply [Max]	3.6 V
Voltage - Supply [Min]	2.7 V

SN74LVTH244A-EP Series

Enhanced product 8-ch, 2.7-V to 3.6-V buffers with bus-hold, TTL-compatible CMOS inputs and 3-state

Part	Output Type	Package / Case	Current - Output High, Low [custom]	Current - Output High, Low [custom]	Operating Temperature [Max]	Operating Temperature [Min]	Mounting Type	Number of Bits per Element	Supplier Device Package	Voltage - Supply [Min]	Voltage - Supply [Max]	Logic Type	Number of Elements	Package / Case [y]	Package / Case [x]	Package / Case [y]	Package / Case	Package / Case
Texas Instruments SN74LVTH244ARGYR	3-State	20-VFQFN Exposed Pad	64 mA	32 mA	85 °C	-40 °C	Surface Mount	4	20-VQFN (3.5x4.5)	2.7 V	3.6 V	Buffer Non-Inverting	2
Texas Instruments SN74LVTH244APWRG4	3-State	20-TSSOP	64 mA	32 mA	85 °C	-40 °C	Surface Mount	4	20-TSSOP	2.7 V	3.6 V	Buffer Non-Inverting	2	4.4 mm	0.173 in
Texas Instruments SN74LVTH244AQDBREP	3-State	20-SSOP	32 mA	24 mA	125 °C	-40 °C	Surface Mount	4	20-SSOP	2.7 V	3.6 V	Buffer Non-Inverting	2
Texas Instruments SN74LVTH244ADWG4	3-State	20-SOIC	64 mA	32 mA	85 °C	-40 °C	Surface Mount	4	20-SOIC	2.7 V	3.6 V	Buffer Non-Inverting	2	0.295 in		7.5 mm
Texas Instruments SN74LVTH244ADW	3-State	20-SOIC	64 mA	32 mA	85 °C	-40 °C	Surface Mount	4	20-SOIC	2.7 V	3.6 V	Buffer Non-Inverting	2	0.295 in		7.5 mm
Texas Instruments SN74LVTH244ANS	3-State	20-SOIC	64 mA	32 mA	85 °C	-40 °C	Surface Mount	4	20-SO	2.7 V	3.6 V	Buffer Non-Inverting	2				0.209 "	5.3 mm
Texas Instruments SN74LVTH244APWR	3-State	20-TSSOP	64 mA	32 mA	85 °C	-40 °C	Surface Mount	4	20-TSSOP	2.7 V	3.6 V	Buffer Non-Inverting	2	4.4 mm	0.173 in
Texas Instruments SN74LVTH244AZQNR	3-State	20-VFBGA	64 mA	32 mA	85 °C	-40 °C	Surface Mount	4	20-BGA MICROSTAR JUNIOR (4x3)	2.7 V	3.6 V	Buffer Non-Inverting	2
Texas Instruments SN74LVTH244APWG4	3-State	20-TSSOP	64 mA	32 mA	85 °C	-40 °C	Surface Mount	4	20-TSSOP	2.7 V	3.6 V	Buffer Non-Inverting	2	4.4 mm	0.173 in
Texas Instruments SN74LVTH244APWRE4	3-State	20-TSSOP	64 mA	32 mA	85 °C	-40 °C	Surface Mount	4	20-TSSOP	2.7 V	3.6 V	Buffer Non-Inverting	2	4.4 mm	0.173 in

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Cut Tape (CT)	1	$ 0.65
		10	$ 0.56
		25	$ 0.52
		100	$ 0.42
		250	$ 0.39
		500	$ 0.33
		1000	$ 0.25
	Digi-Reel®	1	$ 0.65
		10	$ 0.56
		25	$ 0.52
		100	$ 0.42
		250	$ 0.39
		500	$ 0.33
		1000	$ 0.25
	Tape & Reel (TR)	3000	$ 0.23
		6000	$ 0.22
		15000	$ 0.20
		30000	$ 0.19
Texas Instruments	LARGE T&R	1	$ 0.37
		100	$ 0.28
		250	$ 0.21
		1000	$ 0.15

Description

General part information

SN74LVTH244A-EP Series

These octal buffers and line drivers are designed specifically for low-voltage (3.3-V) VCCoperation, but with the capability to provide a TTL interface to a 5-V system environment.

The ’LVTH244A devices are organized as two 4-bit line drivers with separate output-enable (OE)\ inputs. When OE\ is low, the devices pass data from the A inputs to the Y outputs. When OE\ is high, the outputs are in the high-impedance state.

To ensure the high-impedance state during power up or power down, OE\ should be tied to VCCthrough a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.