TPS25200QDRVRQ1
ActiveHOT SWAP CONTROLLER 1-CH 6.5V N-CHANNEL POSITIVE VOLTAGE 6-PIN WSON EP T/R AUTOMOTIVE AEC-Q100
Deep-Dive with AI
Search across all available documentation for this part.
TPS25200QDRVRQ1
ActiveHOT SWAP CONTROLLER 1-CH 6.5V N-CHANNEL POSITIVE VOLTAGE 6-PIN WSON EP T/R AUTOMOTIVE AEC-Q100
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | TPS25200QDRVRQ1 |
|---|---|
| Accuracy | 6.3 % |
| Current - Output | 2.4 A |
| Function | Electronic Fuse |
| Grade | Automotive |
| Mounting Type | Surface Mount |
| Operating Temperature [Max] | 125 ¯C |
| Operating Temperature [Min] | -40 °C |
| Qualification | AEC-Q100 |
| Supplier Device Package | 6-WSON (2x2) |
| Voltage - Input [Max] | 6.5 V |
| Voltage - Input [Min] | 2.5 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 1.07 | |
| 10 | $ 0.96 | |||
| 25 | $ 0.91 | |||
| 100 | $ 0.75 | |||
| 250 | $ 0.70 | |||
| 500 | $ 0.62 | |||
| 1000 | $ 0.49 | |||
| Digi-Reel® | 1 | $ 1.07 | ||
| 10 | $ 0.96 | |||
| 25 | $ 0.91 | |||
| 100 | $ 0.75 | |||
| 250 | $ 0.70 | |||
| 500 | $ 0.62 | |||
| 1000 | $ 0.49 | |||
| Tape & Reel (TR) | 3000 | $ 0.45 | ||
| 6000 | $ 0.43 | |||
| 15000 | $ 0.41 | |||
| Texas Instruments | LARGE T&R | 1 | $ 0.78 | |
| 100 | $ 0.60 | |||
| 250 | $ 0.44 | |||
| 1000 | $ 0.32 | |||
Description
General part information
TPS25200-Q1 Series
The TPS25200-Q1 device is a 5-V eFuse with a precision current-limit and overvoltage clamp. The device provides robust protection for load and source during overvoltage and overcurrent events.
The TPS25200-Q1 device is an intelligent protected load-switch with a VINvalue tolerant to 20 V. In the event that an incorrect voltage is applied at the IN pin, the output clamps to 5.4 V to protect the load. If the voltage at the IN pin exceeds 7.6 V, the device disconnects the load to prevent damage to the device, load, or both.
The TPS25200-Q1 device has an internal 67-mΩ power switch and is intended for protecting the source, device, and load under a variety of abnormal conditions. The device provides up to 2.4 A of continuous load current. The current-limit is programmable from 85 mA to 2.7 A with a single resistor to ground. During overload events, the output current is limited to the level set by the RILIMresistor. If a persistent overload occurs, the device eventually enters thermal shutoff to prevent damage to the TPS25200-Q1 device.
Documents
Technical documentation and resources
