TPS25200DRVR
Active2.5-V TO 6.5-V, 60MΩ, 0.085-2.9A EFUSE WITH REVERSE CURRENT BLOCKING WHEN OFF
Deep-Dive with AI
Search across all available documentation for this part.
TPS25200DRVR
Active2.5-V TO 6.5-V, 60MΩ, 0.085-2.9A EFUSE WITH REVERSE CURRENT BLOCKING WHEN OFF
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | TPS25200DRVR |
|---|---|
| Accuracy | 6 % |
| Current - Output | 2.5 A |
| Function | Electronic Fuse |
| Mounting Type | Surface Mount |
| Operating Temperature [Max] | 125 ¯C |
| Operating Temperature [Min] | -40 °C |
| Supplier Device Package | 6-WSON (2x2) |
| Voltage - Input [Max] | 6.5 V |
| Voltage - Input [Min] | 2.5 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 0.93 | |
| 10 | $ 0.83 | |||
| 25 | $ 0.79 | |||
| 100 | $ 0.65 | |||
| 250 | $ 0.61 | |||
| 500 | $ 0.54 | |||
| 1000 | $ 0.42 | |||
| Digi-Reel® | 1 | $ 0.93 | ||
| 10 | $ 0.83 | |||
| 25 | $ 0.79 | |||
| 100 | $ 0.65 | |||
| 250 | $ 0.61 | |||
| 500 | $ 0.54 | |||
| 1000 | $ 0.42 | |||
| Tape & Reel (TR) | 3000 | $ 0.40 | ||
| 6000 | $ 0.38 | |||
| 15000 | $ 0.36 | |||
| Texas Instruments | LARGE T&R | 1 | $ 0.69 | |
| 100 | $ 0.53 | |||
| 250 | $ 0.39 | |||
| 1000 | $ 0.28 | |||
Description
General part information
TPS25200-Q1 Series
The TPS25200-Q1 device is a 5-V eFuse with a precision current-limit and overvoltage clamp. The device provides robust protection for load and source during overvoltage and overcurrent events.
The TPS25200-Q1 device is an intelligent protected load-switch with a VINvalue tolerant to 20 V. In the event that an incorrect voltage is applied at the IN pin, the output clamps to 5.4 V to protect the load. If the voltage at the IN pin exceeds 7.6 V, the device disconnects the load to prevent damage to the device, load, or both.
The TPS25200-Q1 device has an internal 67-mΩ power switch and is intended for protecting the source, device, and load under a variety of abnormal conditions. The device provides up to 2.4 A of continuous load current. The current-limit is programmable from 85 mA to 2.7 A with a single resistor to ground. During overload events, the output current is limited to the level set by the RILIMresistor. If a persistent overload occurs, the device eventually enters thermal shutoff to prevent damage to the TPS25200-Q1 device.
Documents
Technical documentation and resources
