TPS25200-Q1 Series
2.5-V to 6.5-V, 67mΩ, 2.1-2.7A automotive eFuse with reverse current blocking when off
Manufacturer: Texas Instruments
Catalog
2.5-V to 6.5-V, 67mΩ, 2.1-2.7A automotive eFuse with reverse current blocking when off
Key Features
• Qualified for Automotive ApplicationsAEC-Q100 Qualified With the Following Results:Device HBM Classification Level 2Device CDM Classification Level C52.5-V to 6.5-V Operation20-V Continuous VIN(Absolute Maximum)7.6-V Input Overvoltage Shutoff5.25-V to 5.55-V Fixed Overvoltge Clamp0.6-µs Overvoltage Lockout Response3.5-µs Short-Circuit Response67-mΩ High-Side MOSFETAccurate 2.5-A Minimum, 2.9-A Maximum and2.1-A Minimum, 2.5-A Maximum Setting (IncludingResistor)±6.3% Current-Limit Accuracy at 2.7 AReverse Current Blocking While DisabledBuilt-in Soft StartPin-to-Pin Compatible with TPS2553Qualified for Automotive ApplicationsAEC-Q100 Qualified With the Following Results:Device HBM Classification Level 2Device CDM Classification Level C52.5-V to 6.5-V Operation20-V Continuous VIN(Absolute Maximum)7.6-V Input Overvoltage Shutoff5.25-V to 5.55-V Fixed Overvoltge Clamp0.6-µs Overvoltage Lockout Response3.5-µs Short-Circuit Response67-mΩ High-Side MOSFETAccurate 2.5-A Minimum, 2.9-A Maximum and2.1-A Minimum, 2.5-A Maximum Setting (IncludingResistor)±6.3% Current-Limit Accuracy at 2.7 AReverse Current Blocking While DisabledBuilt-in Soft StartPin-to-Pin Compatible with TPS2553
Description
AI
The TPS25200-Q1 device is a 5-V eFuse with a precision current-limit and overvoltage clamp. The device provides robust protection for load and source during overvoltage and overcurrent events.
The TPS25200-Q1 device is an intelligent protected load-switch with a VINvalue tolerant to 20 V. In the event that an incorrect voltage is applied at the IN pin, the output clamps to 5.4 V to protect the load. If the voltage at the IN pin exceeds 7.6 V, the device disconnects the load to prevent damage to the device, load, or both.
The TPS25200-Q1 device has an internal 67-mΩ power switch and is intended for protecting the source, device, and load under a variety of abnormal conditions. The device provides up to 2.4 A of continuous load current. The current-limit is programmable from 85 mA to 2.7 A with a single resistor to ground. During overload events, the output current is limited to the level set by the RILIMresistor. If a persistent overload occurs, the device eventually enters thermal shutoff to prevent damage to the TPS25200-Q1 device.
The TPS25200-Q1 device is a 5-V eFuse with a precision current-limit and overvoltage clamp. The device provides robust protection for load and source during overvoltage and overcurrent events.
The TPS25200-Q1 device is an intelligent protected load-switch with a VINvalue tolerant to 20 V. In the event that an incorrect voltage is applied at the IN pin, the output clamps to 5.4 V to protect the load. If the voltage at the IN pin exceeds 7.6 V, the device disconnects the load to prevent damage to the device, load, or both.
The TPS25200-Q1 device has an internal 67-mΩ power switch and is intended for protecting the source, device, and load under a variety of abnormal conditions. The device provides up to 2.4 A of continuous load current. The current-limit is programmable from 85 mA to 2.7 A with a single resistor to ground. During overload events, the output current is limited to the level set by the RILIMresistor. If a persistent overload occurs, the device eventually enters thermal shutoff to prevent damage to the TPS25200-Q1 device.
