
ATWILC1000-MR110PB-T
ActiveSMARTCONNECT ATWILC1000 802.11 B/G/N MODULE T&R 28 MODULE 21.72X14.73XMM T/R ROHS COMPLIANT: YES
Deep-Dive with AI
Search across all available documentation for this part.

ATWILC1000-MR110PB-T
ActiveSMARTCONNECT ATWILC1000 802.11 B/G/N MODULE T&R 28 MODULE 21.72X14.73XMM T/R ROHS COMPLIANT: YES
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | ATWILC1000-MR110PB-T |
|---|---|
| Antenna Type | Integrated, Trace |
| Current - Receiving | 63 mA |
| Data Rate | 54 Mbps |
| Frequency [Max] | 2.472 GHz |
| Frequency [Min] | 2.412 GHz |
| Modulation | DSSS, OFDM, CCK |
| Mounting Type | Surface Mount |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Package / Case | Module |
| Power - Output | 18.7 dBm |
| Protocol | 802.11b/g/n |
| RF Family/Standard | WiFi |
| Sensitivity | -94 dBm |
| Serial Interfaces | SPI, UART, I2C, SDIO |
| Voltage - Supply [Max] | 3.6 V |
| Voltage - Supply [Min] | 1.8 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 8.95 | |
| 25 | $ 8.18 | |||
| Digi-Reel® | 1 | $ 8.95 | ||
| 25 | $ 8.18 | |||
| Tape & Reel (TR) | 500 | $ 8.18 | ||
| Microchip Direct | T/R | 1 | $ 8.95 | |
| 25 | $ 8.10 | |||
| 100 | $ 7.67 | |||
| 1000 | $ 6.89 | |||
| 5000 | $ 6.44 | |||
| Newark | Each (Supplied on Full Reel) | 100 | $ 6.60 | |
Description
General part information
ATWILC1000-IC Series
Microchip's SmartConnect ATWILC1000 is an IEEE 802.11 b/g/n IoT link controller IC. The ATWILC1000 connects to Microchip AVR/SMART MCUs, SMART MPUs, FPGAs and other processors with minimal resource requirements and a simple SPI/SDIO-to-Wi-Fi interface.
The ATWILC1000 supports single stream 1x1 802.11n mode providing tested throughput of up to 46 Mbps UDP & 28 Mbps TCP/IP. The ATWILC1000 features a fully integrated Power Amplifier, LNA, Switch and Power Management. The only external clock source needed is a high-speed crystal or oscillator.
The ATWILC1000 can be used in Linux, RTOS or Baremetal Environments.
Documents
Technical documentation and resources