MCP14A0302T-E/KBA
Active3.0A SINGLE NON-INV MOSFET DRIVER WITH ENABLE PIN, WDFN 8 WDFN 2X2X0.8MM T/R ROHS COMPLIANT: YES
Deep-Dive with AI
Search across all available documentation for this part.
MCP14A0302T-E/KBA
Active3.0A SINGLE NON-INV MOSFET DRIVER WITH ENABLE PIN, WDFN 8 WDFN 2X2X0.8MM T/R ROHS COMPLIANT: YES
Technical Specifications
Parameters and characteristics for this part
| Specification | MCP14A0302T-E/KBA |
|---|---|
| Channel Type | Single |
| Current - Peak Output (Source, Sink) [custom] | 3 A |
| Current - Peak Output (Source, Sink) [custom] | 3 A |
| Driven Configuration | High-Side, Low-Side |
| Gate Type | IGBT |
| Input Type | Non-Inverting, Inverting |
| Logic Voltage - VIL, VIH | 0.8 V, 2 V |
| Mounting Type | Wettable Flank, Surface Mount |
| Number of Drivers | 1 |
| Operating Temperature [Max] | 125 °C |
| Operating Temperature [Min] | -40 °C |
| Package / Case | 8-WFDFN Exposed Pad |
| Rise / Fall Time (Typ) [custom] | 12 ns |
| Rise / Fall Time (Typ) [custom] | 13 ns |
| Supplier Device Package | 8-WDFN (2x2) |
| Voltage - Supply [Max] | 18 V |
| Voltage - Supply [Min] | 4.5 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 1.11 | |
| 25 | $ 0.92 | |||
| 100 | $ 0.83 | |||
| Digi-Reel® | 1 | $ 1.11 | ||
| 25 | $ 0.92 | |||
| 100 | $ 0.83 | |||
| Tape & Reel (TR) | 3000 | $ 0.83 | ||
| Microchip Direct | T/R | 1 | $ 1.11 | |
| 25 | $ 0.92 | |||
| 100 | $ 0.83 | |||
| 1000 | $ 0.80 | |||
| Newark | Each (Supplied on Full Reel) | 3000 | $ 0.86 | |
Description
General part information
MCP14A0302 Series
The MCP14A0301/2 devices are high-speed MOSFET drivers that are capable of providing up to 3 A of peak current while operating from a single 4.5 V to 18 V supply. The inverting (MCP14A0301) or non-inverting (MCP14A0302) single channel output is directly controlled from either TTL or CMOS (2 V to 18 V) logic. These devices also feature low shoot-through current, matched rise and fall times, and short propagation delays which make them ideal for high switching frequency applications.
The MCP14A0301/2 family of devices offer enhanced control with Enable functionality. The active-high Enable pin can be driven low to drive the output of the MCP14A0301/2 low, regardless of the status of the Input pin. An integrated pull-up resistor allows the user to leave the Enable pin floating for standard operation.
Additionally, the MCP14A0301/2 devices feature separate ground pins (AGND and GND), allowing greater noise isolation between the level-sensitive Input/Enable pins and the fast, high-current transitions of the push-pull output stage.
Documents
Technical documentation and resources
