Integrated Circuits (ICs)

SN74AVC16827DGGR

Active

20-CH, 1.2-V TO 3.6-V BUFFERS WITH 3-STATE OUTPUTS

Deep-Dive with AI

Search across all available documentation for this part.

DocumentsAVC Logic Family Technology and Applications (Rev. A)Voltage Translation Between 3.3-V, 2.5-V, 1.8-V, and 1.5-V Logic Standards (Rev. B)+11

Integrated Circuits (ICs)

SN74AVC16827DGGR

Active

Texas Instruments

20-CH, 1.2-V TO 3.6-V BUFFERS WITH 3-STATE OUTPUTS

Deep-Dive with AI

DocumentsAVC Logic Family Technology and Applications (Rev. A)Voltage Translation Between 3.3-V, 2.5-V, 1.8-V, and 1.5-V Logic Standards (Rev. B)+11

Specifications Series Pricing Description Documents

Technical Specifications

Parameters and characteristics for this part

Specification	SN74AVC16827DGGR

Current - Output High, Low [custom]	12 mA
Current - Output High, Low [custom]	12 mA
Logic Type	Buffer, Non-Inverting
Mounting Type	Surface Mount
Number of Bits per Element	10
Number of Elements	2
Operating Temperature [Max]	85 °C
Operating Temperature [Min]	-40 °C
Output Type	3-State
Package / Case	6.1 mm
Package / Case	0.24 in
Package / Case	56-TFSOP
Supplier Device Package	56-TSSOP
Voltage - Supply [Max]	3.6 V
Voltage - Supply [Min]	1.2 V

SN74AVC16827 Series

20-ch, 1.2-V to 3.6-V buffers with 3-state outputs

Part	Number of Bits per Element	Output Type	Package / Case	Package / Case	Package / Case	Voltage - Supply [Min]	Voltage - Supply [Max]	Logic Type	Current - Output High, Low [custom]	Current - Output High, Low [custom]	Supplier Device Package	Operating Temperature [Max]	Operating Temperature [Min]	Number of Elements	Mounting Type
Texas Instruments SN74AVC16827DGG	10	3-State	6.1 mm	0.24 in	56-TFSOP	1.2 V	3.6 V	Buffer Non-Inverting	12 mA	12 mA	56-TSSOP	85 °C	-40 °C	2	Surface Mount
Texas Instruments SN74AVC16827DGGR	10	3-State	6.1 mm	0.24 in	56-TFSOP	1.2 V	3.6 V	Buffer Non-Inverting	12 mA	12 mA	56-TSSOP	85 °C	-40 °C	2	Surface Mount

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Cut Tape (CT)	1	$ 4.12
		10	$ 3.70
		25	$ 3.50
		100	$ 3.03
		250	$ 2.88
		500	$ 2.58
		1000	$ 2.18
	Digi-Reel®	1	$ 4.12
		10	$ 3.70
		25	$ 3.50
		100	$ 3.03
		250	$ 2.88
		500	$ 2.58
		1000	$ 2.18
	Tape & Reel (TR)	2000	$ 2.07
Texas Instruments	LARGE T&R	1	$ 3.11
		100	$ 2.73
		250	$ 1.91
		1000	$ 1.54

Description

General part information

SN74AVC16827 Series

A Dynamic Output Control (DOC) circuit is implemented, which, during the transition, initially lowers the output impedance to effectively drive the load and, subsequently, raises the impedance to reduce noise. Figure 1 shows typical VOLvs IOLand VOHvs IOHcurves to illustrate the output impedance and drive capability of the circuit. At the beginning of the signal transition, the DOC circuit provides a maximum dynamic drive that is equivalent to a high-drive standard-output device. For more information, refer to the TI application reports,AVC Logic Family Technology and Applications, literature number SCEA006, andDynamic Output Control (DOCTM) Circuitry Technology and Applications, literature number SCEA009.

This 20-bit noninverting buffer/driver is operational at 1.2-V to 3.6-V VCC, but is designed specifically for 1.65-V to 3.6-V VCCoperation.

The SN74AVC16827 is composed of two 10-bit sections with separate output-enable signals. For either 10-bit buffer section, the two output-enable (1OE1\ and 1OE2\ or 2OE1\ and 2OE2\) inputs must both be low for the corresponding Y outputs to be active. If either output-enable input is high, the outputs of that 10-bit buffer section are in the high-impedance state.