LAN8830-V/PSA
ActiveGBIT ETHERNET TRANSCEIVER WITH RGMII 48 VQFN 7X7X1.0MM TRAY ROHS COMPLIANT: YES
Deep-Dive with AI
Search across all available documentation for this part.
LAN8830-V/PSA
ActiveGBIT ETHERNET TRANSCEIVER WITH RGMII 48 VQFN 7X7X1.0MM TRAY ROHS COMPLIANT: YES
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | LAN8830-V/PSA |
|---|---|
| Data Rate | 100Mbps, 1Gbps, 10Mbps |
| Duplex | Half, Full |
| Mounting Type | Surface Mount |
| Number of Drivers/Receivers [custom] | 4 |
| Number of Drivers/Receivers [custom] | 4 |
| Operating Temperature [Max] | 105 °C |
| Operating Temperature [Min] | -40 °C |
| Package / Case | 48-VFQFN Exposed Pad |
| Protocol | Ethernet |
| Supplier Device Package | 48-VQFN (7x7) |
| Type | Transceiver |
| Voltage - Supply [Max] | 1.21 V, 3.63 V, 2.75 V |
| Voltage - Supply [Min] | 3.135 V, 1.067 V, 2.375 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Tray | 1 | $ 4.46 | |
| 25 | $ 3.71 | |||
| 100 | $ 3.59 | |||
| Microchip Direct | TRAY | 1 | $ 4.46 | |
| 25 | $ 3.71 | |||
| 100 | $ 3.38 | |||
| 1000 | $ 3.12 | |||
| 5000 | $ 2.96 | |||
| Newark | Each | 100 | $ 3.38 | |
Description
General part information
LAN8830 Series
The LAN8830 is an integrated triple-speed (10Base-T/100Base-TX/1000Base-T) Ethernet physical-layer transceiver for transmission and reception of data on standard CAT-5, CAT-5e and CAT6 unshielded twisted pair (UTP) cable.
The LAN8830 provides RGMII (Reduced Gigabit Media Independent Interface) for connection to Ethernet switches, Microcontrollers or Microprocessors with an embedded Ethernet Media Access Controller (MAC) supporting the RGMIII interface for data transfer at 1000Mbps or 10/100Mbps.
The LAN8830 reduces board cost and simplifies board layout by using on-chip termination resistors for the four differential pairs and by integrating an LDO controller to drive a low-cost MOSFET to supply the 1.2V core.
Documents
Technical documentation and resources
