SN74HCS09-Q1Automotive, 4-ch 2-input 2-V to 6-V AND gate with open-drain outputs and Schmitt-trigger inputs | Gates and Inverters | 3 | Active | This device contains four independent 2-input AND gates with open-drain outputs and Schmitt-trigger inputs. Each gate performs the Boolean function Y = A ● B in positive logic.
This device contains four independent 2-input AND gates with open-drain outputs and Schmitt-trigger inputs. Each gate performs the Boolean function Y = A ● B in positive logic. |
SN74HCS10-Q1Automotive 3-ch, 3-input, 2-V to 6-V low power NAND gates with Schmitt-Trigger inputs | Gates and Inverters | 2 | Active | This device contains three independent 3-input NAND Gates with Schmitt-trigger inputs. Each gate performs the Boolean function Y =A ● B ● Cin positive logic.
This device contains three independent 3-input NAND Gates with Schmitt-trigger inputs. Each gate performs the Boolean function Y =A ● B ● Cin positive logic. |
SN74HCS11-Q1Automotive, 3-ch, 3-input 2-V to 6-V high-speed (12 ns) AND gate with Schmitt trigger inputs | Integrated Circuits (ICs) | 2 | Active | This device contains three independent 3-input AND Gates with Schmitt-trigger inputs. Each gate performs the Boolean function Y = A ● B ● C in positive logic.
This device contains three independent 3-input AND Gates with Schmitt-trigger inputs. Each gate performs the Boolean function Y = A ● B ● C in positive logic. |
SN74HCS125-Q1Automotive Schmitt-trigger inputs quadruple bus buffer gates with 3-state outputs | Integrated Circuits (ICs) | 7 | Active | The SN74HCS125-Q1 contains four independent buffers with 3-state outputs and Schmitt-trigger inputs. Each buffer performs the Boolean function Y = A in positive logic. The outputs can be put into a Hi-Z state by applying a High on theOEpin.
The SN74HCS125-Q1 contains four independent buffers with 3-state outputs and Schmitt-trigger inputs. Each buffer performs the Boolean function Y = A in positive logic. The outputs can be put into a Hi-Z state by applying a High on theOEpin. |
SN74HCS126-Q1Automotive Schmitt-trigger inputs quadruple bus buffer gates with 3-state outputs | Integrated Circuits (ICs) | 2 | Active | This device contains four independent buffer with 3-state outputs and Schmitt-trigger inputs. Each gate performs the Boolean function Y = A in positive logic. The outputs can be put into a Hi-Z state by applying a Low on the OE pin
This device contains four independent buffer with 3-state outputs and Schmitt-trigger inputs. Each gate performs the Boolean function Y = A in positive logic. The outputs can be put into a Hi-Z state by applying a Low on the OE pin |
SN74HCS137-Q1Automotive 3-to-8 line decoder demultiplexer with address latches | Signal Switches, Multiplexers, Decoders | 3 | Active | The SN74HCS137-Q1 is a three to eight decoder with latched address inputs, one standard output strobe (G0), and one active low output strobe (G1). When the latch enable (LE) input is low, the device acts as a standard three to eight decoder. When the latch enable (LE) input is high, the address latch retains its previous state. When the outputs are gated by either strobe input, they are all forced into the high state. When the outputs are not disabled by one or both of the strobe inputs, only the selected output is low while all others are high.
The SN74HCS137-Q1 is a three to eight decoder with latched address inputs, one standard output strobe (G0), and one active low output strobe (G1). When the latch enable (LE) input is low, the device acts as a standard three to eight decoder. When the latch enable (LE) input is high, the address latch retains its previous state. When the outputs are gated by either strobe input, they are all forced into the high state. When the outputs are not disabled by one or both of the strobe inputs, only the selected output is low while all others are high. |
SN74HCS138-Q13-line to 8-line decoders/demultiplexer with Schmitt-trigger inputs | Integrated Circuits (ICs) | 4 | Active | The SN74HCS138-Q1 is a three to eight decoder with one standard output strobe (G2) and two active low output strobes (G1andG0). When the outputs are gated by any of the strobe inputs, they are all forced into the high state. When the outputs are not disabled by the strobe inputs, only the selected output is low while all others are high.
The SN74HCS138-Q1 is a three to eight decoder with one standard output strobe (G2) and two active low output strobes (G1andG0). When the outputs are gated by any of the strobe inputs, they are all forced into the high state. When the outputs are not disabled by the strobe inputs, only the selected output is low while all others are high. |
SN74HCS139-Q1Automotive dual 2-line to 4-line decoders/demultiplexers | Signal Switches, Multiplexers, Decoders | 4 | Active | The SN74HCS139-Q1 contains two two-to-four decoders with one active low output strobe (G). When the outputs of one channel are gated by the strobe input, they are all forced into the high state. When the outputs are not disabled by the strobe input, only the selected output is low while all others are high.
The SN74HCS139-Q1 contains two two-to-four decoders with one active low output strobe (G). When the outputs of one channel are gated by the strobe input, they are all forced into the high state. When the outputs are not disabled by the strobe input, only the selected output is low while all others are high. |
SN74HCS14-Q1Automotive 6-ch, 2-V to 6-V low power inverters with Schmitt-trigger inputs | Gates and Inverters | 6 | Active | This device contains six independent Inverter with Schmitt-trigger inputs. Each gate performs the Boolean function Y =Ain positive logic.
This device contains six independent Inverter with Schmitt-trigger inputs. Each gate performs the Boolean function Y =Ain positive logic. |
SN74HCS151-Q1Automotive 8-to-1 multiplexer with Schmitt-trigger inputs | Signal Switches, Multiplexers, Decoders | 2 | Active | The SN74HCS151-Q1 is a data selector/multiplexer containing full binary decoding to select one of eight data sources and complementary outputs. The strobe (G) input must be at a low logic level to enable the inputs. A high level at the strobe terminal forces the W output high and the Y output low.
The SN74HCS151-Q1 is a data selector/multiplexer containing full binary decoding to select one of eight data sources and complementary outputs. The strobe (G) input must be at a low logic level to enable the inputs. A high level at the strobe terminal forces the W output high and the Y output low. |
