-Power management evaluation board based on the stepdown regulators L6981,L7983, ST1PS03, and the ST730 LDO | Discrete Assortment Kits | 15 | Active | The STEVAL-MKIT04KA is composed by four different adapters DIL24: the STEVAL-MKI224V1, the STEVAL-MKI227A contained in the STEVAL-MKI227KA adapter kit, the STEVAL-MKI235A contained in the STEVAL-MKI235KA adapter kit, the STEVAL-MKE003A contained in the STEVAL-MKI227KA and STEVAL-MKI235KA adapter kit.
All SMD devices are soldered on the boards. Male and female connectors must be manually soldered.
The STEVAL-MKE003A can be plugged over the STEVAL-MKI227A or the STEVAL-MKI235A board.
In case the application using LSM6DSV16X is fixed it is possible to solder a 0 ohm resistor instead of shunt in the JQ connector.
These adapters are singularly supported by the STEVAL-MKI109V3 motherboards, which includes a high performance 32-bit microcontroller functioning as a bridge between the sensor and a PC.
On the STEVAL-MKI109V3 it is possible to use the downloadable graphical user interface (Unico-GUI or MEMS-Studio), or dedicated software routines for customized applications.
It is also possible to plug the single board into X-NUCLEO-IKS01A3. |
1.5KE1500 W, 33.3 V TVS in DO-201 | TVS Diodes | 5 | Active | The 1.5KE TVS series is designed to protect sensitive equipment against electrostatic discharges according to IEC 61000-4-2, MIL STD 883 Method 3015, and electrical overstress such as IEC 61000-4-4 and 5. They are used for surges below 1500 W 10/1000 μs.
This planar technology makes it compatible with high-end equipment and SMPS where low leakage current and high junction temperature are required to provide reliability and stability over time. |
1.5KE151500 W, 12.8 V TVS in DO-201 | Transient Voltage Suppressors (TVS) | 3 | Active | The 1.5KE TVS series is designed to protect sensitive equipment against electrostatic discharges according to IEC 61000-4-2, MIL STD 883 Method 3015, and electrical overstress such as IEC 61000-4-4 and 5. They are used for surges below 1500 W 10/1000 μs.
This planar technology makes it compatible with high-end equipment and SMPS where low leakage current and high junction temperature are required to provide reliability and stability over time. |
| Transient Voltage Suppressors (TVS) | 2 | Active | The 1.5KE TVS series is designed to protect sensitive equipment against electrostatic discharges according to IEC 61000-4-2, MIL STD 883 Method 3015, and electrical overstress such as IEC 61000-4-4 and 5. They are used for surges below 1500 W 10/1000 μs.
This planar technology makes it compatible with high-end equipment and SMPS where low leakage current and high junction temperature are required to provide reliability and stability over time. |
| TVS Diodes | 1 | Active | The 1.5KE TVS series is designed to protect sensitive equipment against electrostatic discharges according to IEC 61000-4-2, MIL STD 883 Method 3015, and electrical overstress such as IEC 61000-4-4 and 5. They are used for surges below 1500 W 10/1000 μs.
This planar technology makes it compatible with high-end equipment and SMPS where low leakage current and high junction temperature are required to provide reliability and stability over time. |
| Circuit Protection | 2 | Active | |
| Circuit Protection | 1 | Active | The 1.5KE TVS series is designed to protect sensitive equipment against electrostatic discharges according to IEC 61000-4-2, MIL STD 883 Method 3015, and electrical overstress such as IEC 61000-4-4 and 5. They are used for surges below 1500 W 10/1000 μs.
This planar technology makes it compatible with high-end equipment and SMPS where low leakage current and high junction temperature are required to provide reliability and stability over time. |
1.5KE301500 W, 25.6 V TVS in DO-201 | TVS Diodes | 2 | Active | The 1.5KE TVS series is designed to protect sensitive equipment against electrostatic discharges according to IEC 61000-4-2, MIL STD 883 Method 3015, and electrical overstress such as IEC 61000-4-4 and 5. They are used for surges below 1500 W 10/1000 μs.
This planar technology makes it compatible with high-end equipment and SMPS where low leakage current and high junction temperature are required to provide reliability and stability over time. |
| Transient Voltage Suppressors (TVS) | 1 | Active | The 1.5KE TVS series is designed to protect sensitive equipment against electrostatic discharges according to IEC 61000-4-2, MIL STD 883 Method 3015, and electrical overstress such as IEC 61000-4-4 and 5. They are used for surges below 1500 W 10/1000 μs.
This planar technology makes it compatible with high-end equipment and SMPS where low leakage current and high junction temperature are required to provide reliability and stability over time. |
| Circuit Protection | 2 | Active | |