Beta

⌘K

O

ON Semiconductor

Series List(12147)

...

...

Series	Category	# Parts	Status	Description

Standalone parts(10272)

...

Part	Category	Description
ON Semiconductor NCV8402AMNWT1G	Integrated Circuits (ICs)	SELF-PROTECTED N-CHANNEL POWER MOSFET/ REEL
ON Semiconductor 74AC32PCObsolete	Integrated Circuits (ICs)	IC GATE OR 4CH 2-INP 14MDIP
ON Semiconductor FGI3236-F085	Discrete Semiconductor Products	IGBT, 360V, 27A, 1.32V, 320MJ, TO-262<BR>ECOSPARK® I, N-CHANNEL IGNITION
ON Semiconductor FAN1655MTFXObsolete	Integrated Circuits (ICs)	IC REG CTRLR DDR 1OUT 16TSSOP
ON Semiconductor FIN1027MObsolete	Integrated Circuits (ICs)	LVDS DRIVER, LVDS DIFFERENTIAL DRIVER, -40 °C, 85 °C, 3 V, 3.6 V, SOIC
ON Semiconductor TMC2111AR3C	Integrated Circuits (ICs)	PIPELINE REGISTER, 8-BIT PQCC28
ON Semiconductor SLV4HC4053ADWRGObsolete	Integrated Circuits (ICs)	LDO REGULATOR, ULTRA-LOW NOISE,
ON Semiconductor FOD4218V	Isolators	OPTOCOUPLER, DIP, 6 PINS, 5 KV, NON ZERO CROSSING, 800 V, FOD4218 SERIES
ON Semiconductor NVMFD5483NLT1GObsolete	Discrete Semiconductor Products	DUAL N-CHANNEL POWER MOSFET 60V, 24A, 36MΩ
ON Semiconductor 2SD1804S-TL-E	Discrete Semiconductor Products	BIP NPN 8A 50V

Series	Category	# Parts	Status	Description

NLSX30122-Bit 100 Mbps Configurable Dual-Supply Level Translator	Logic	2	Obsolete	The NLSX3012 is a 2 bit configurable dual-supply bidirectional level translator without a direction control pin. The I/O Vcc minus and I/O VL minus ports are designed to track two different power supply rails, Vcc and VL respectively. The VCC supply rail is configurable from 1.3 V to 4.5 V while the VL supply rail is configurable from 0.9 V to VCC minus 0.4V. This allows lower voltage logic signals on the VL side to be translated into higher voltage logic signals on the VCC side, and higher voltage logic signals on the VL side to be translated into lower voltage logic signals on the Vcc side. Both I/O ports are auto sensing; requiring no direction pin. The Output Enable input, when Low, disables both I/O ports by putting them in 3 state. This significantly reduces the supply currents from both Vcc and VL. The EN signal is designed to track VL.
NLSX3013	Translators, Level Shifters	2	Obsolete
NLSX3014Level Translator, 4-Bit, Configurable Dual-Supply, 100 Mbps	Integrated Circuits (ICs)	1	Obsolete	The NLSX3014 is a 4 bit configurable dual supply bidirectional level translator without a directional control pin. The IO_VCCand IO_VLports are designed to track two different power supply rails, VCCand VLrespectively. The VCCsupply rail is configurable from 1.3V to 4.5V while the VLsupply rail is configurable from 0.9V to VCCminus 0.4V. This allows lower voltage logic signals on the VLside to be translated into higher voltage logic signals on the VCCside, and vice versa. Both IO ports are auto sensing and thus, have no direction pin. The Enable EN input, when Low, disables both IO ports by putting them in 3 state. This reduces significantly the supply currents from both VCCand VL. The EN signal is designed to track VL.
NLSX30188-Bit 100 Mb/s Configurable Dual-Supply Level Translator	Integrated Circuits (ICs)	2	Obsolete	The NLSX3018 is a 8 bit configurable dual supply bidirectional level translator without a direction control pin. The I/O VCC- and I/O VL- ports are designed to track two different power supply rails, VCC and VL respectively. The VCC supply rail is configurable from 1.3 V to 4.5 V while the VL supply rail is configurable from 0.9 V to (VCC - 0.4) V. This allows lower voltage logic signals on the VL side to be translated into higher voltage logic signals on the VCC side, and vice versa. Both I/O ports are auto sensing not requiring a direction pin.
NLSX3378	Integrated Circuits (ICs)	1	Obsolete
NLSX40144-Bit 100 Mbps Configurable Dual-Supply Level Translator	Integrated Circuits (ICs)	3	Obsolete	The NLSX4014 is a 4 bit configurable dual supply bidirectional level translator without a direction control pin. The I/O VCC- and I/O VLports are designed to track two different power supply rails, VCCand VLrespectively. The VCCsupply rail is configurable from 1.3 V to 4.5 V while the VL supply rail is configurable from 0.9 V to (VCC- 0.4) V. This allows lower voltage logic signals on the VL side to be translated into higher voltage logic signals on the VCCside, and vice versa. Both I/O ports are auto sensing; thus, no direction pin is required.The Output Enable (EN) input, when Low, disables both I/O ports by putting them in 3 state. This significantly reduces the supply currents from both VCCand VL. The EN signal is designed to track VL.
NLSX4378	Integrated Circuits (ICs)	1	Obsolete
NLSX44011-Bit 20 Mb/s Dual-Supply Level Translator	Logic	1	Obsolete	The NLSX4401 is a 1−bit configurable dual−supply bidirectionalauto sensing translator that does not require a directional control pin.The I/O VCC and I/O VL ports are designed to track two differentpower supply rails, VCC and VL respectively. Both the VCC and VLsupply rails are configurable from 1.5 V to 5.5 V. This allows voltagelogic signals on the VL side to be translated into lower, higher orequal value voltage logic signals on the VCC side, and vice−versa.The NLSX4401 translator has integrated 10 k pull−up resistorson the I/O lines. The integrated pull−up resistors are used to pull upthe I/O lines to either VL or VCC. The NLSX4401 is an excellentmatch for open−drain applications such as the I2C communicationbus.
NLSX50022-Bit 100 Mbps Configurable Dual-Supply Level Translator	Logic	1	Obsolete	The NLSX5002 is a 2-bit configurable dualsupply autosensing bidirectional level translator that does not require a direction control pin. The I/O VCC and I/O VLports are designed to track two different power supply rails, VCC and VL respectively. Both the VCC and the VL supply rails are configurable from 0.9 V to 4.5 V. This allows a logic signal on the VL side to be translated to either a higher or a lower logic signal voltage on the VCC side, and vice versa. The NLSX5002 offers the feature that the values of the VCC and VL supplies are independent.Design flexibility is maximized because VL can be set to a value either greater than or less than the VCC supply. In contrast, the majority of competitive auto sense translators have a restriction that the value of the VL supply must be equal to less than VCC0.4 V. The NLSX5002 has high output current capability, which allows the translator to drive high capacitive loads such as most high frequency EMI filters. Another feature of the NLSX5002 is that each I/O_VLn and I/O_VCCn channel can function as either an input or an output.An Output Enable (EN) input is available to reduce the power consumption. The EN pin can be used to disable both I/O ports by putting them in 3-state which significantly reduces the supply current from both VCC and VL. The EN signal is referenced to the VL supply.
NLSX5004Level Translator, 4-Bit, 100 Mbps, Configurable Dual-Supply	Integrated Circuits (ICs)	1	Active	The NLSX5004 is 4−bit configurable dual−supply autosensing bidirectional level translator that do not require direction control pins. The A− and B−ports are designed to track two different power supply rails, VCCAand VCCBrespectively.Both the VCCAand the VCCBsupply rails are independently−configurable from 0.9 V to 3.6 V.The NLSX5004 has high dynamic output current capability, allowing the translators to drive high capacitive loads.Enable input pins are available to reduce the power consumption.These pins may be used to disable both A− and B−ports by putting them in 3−state significantly reducing the supply current from both VCCAand VCCB. These pins are referenced to the VCCAsupply. The NLSX5004 has an active−High enable (EN).