NLSX4014 Series

4-Bit 100 Mbps Configurable Dual-Supply Level Translator

Catalog

4-Bit 100 Mbps Configurable Dual-Supply Level Translator

Part	Translator Type	Features	Voltage - VCCA [Min]	Voltage - VCCA [Max]	Voltage - VCCB [Max]	Voltage - VCCB [Min]	Output Type	Supplier Device Package	Channel Type	Package / Case [custom]	Package / Case [custom]	Package / Case	Data Rate	Mounting Type	Operating Temperature [Max]	Operating Temperature [Min]	Number of Circuits	Channels per Circuit	Package / Case [x]	Package / Case [y]	Supplier Device Package [y]	Supplier Device Package [x]
ON Semiconductor NLSX4014DTR2G	Voltage Level	Auto-Direction Sensing	0.9 V	4.1 V	4.5 V	1.3 V	Non-Inverted Tri-State	14-TSSOP	Bidirectional	0.173 "	4.4 mm	14-TSSOP	140 Mbps	Surface Mount	85 °C	-40 °C	1	4
ON Semiconductor NLSX4014DR2G	Voltage Level	Auto-Direction Sensing	0.9 V	4.1 V	4.5 V	1.3 V	Non-Inverted Tri-State		Bidirectional			14-SOIC	140 Mbps	Surface Mount	85 °C	-40 °C	1	4	0.154 in	3.9 mm
ON Semiconductor NLSX4014MUTAG	Voltage Level	Auto-Direction Sensing	0.9 V	4.1 V	4.5 V	1.3 V	Non-Inverted Tri-State	12-UQFN	Bidirectional			12-UFQFN	140 Mbps	Surface Mount	85 °C	-40 °C	1	4			2	1.7

Catalog

4-Bit 100 Mbps Configurable Dual-Supply Level Translator

Key Features

• Wide HighSide VCC Operating Range: 1.3 V to 4.5 V

• Wide LowSide VL Operating Range: 0.9 V to (VCC - 0.4) V

• HighSpeed with 100 Mb/s Guaranteed Date Rate for VL> 1.6 V

• Low Bit - to - Bit Skew

• Overvoltage Tolerant Enable and I/O Pins

• Non - preferential Powerup Sequencing

• Small packaging: 1.7 mm x 2.0 mm UQFN12

Description

The NLSX4014 is a 4 bit configurable dual supply bidirectional level translator without a direction control pin. The I/O VCC- and I/O VLports are designed to track two different power supply rails, VCCand VLrespectively. The VCCsupply rail is configurable from 1.3 V to 4.5 V while the VL supply rail is configurable from 0.9 V to (VCC- 0.4) V. This allows lower voltage logic signals on the VL side to be translated into higher voltage logic signals on the VCCside, and vice versa. Both I/O ports are auto sensing; thus, no direction pin is required.The Output Enable (EN) input, when Low, disables both I/O ports by putting them in 3 state. This significantly reduces the supply currents from both VCCand VL. The EN signal is designed to track VL.