Beta

⌘K

O

ON Semiconductor

Series List(12147)

...

...

Series	Category	# Parts	Status	Description

Standalone parts(10272)

...

Part	Category	Description
ON Semiconductor NCV8402AMNWT1G	Integrated Circuits (ICs)	SELF-PROTECTED N-CHANNEL POWER MOSFET/ REEL
ON Semiconductor 74AC32PCObsolete	Integrated Circuits (ICs)	IC GATE OR 4CH 2-INP 14MDIP
ON Semiconductor FGI3236-F085	Discrete Semiconductor Products	IGBT, 360V, 27A, 1.32V, 320MJ, TO-262<BR>ECOSPARK® I, N-CHANNEL IGNITION
ON Semiconductor FAN1655MTFXObsolete	Integrated Circuits (ICs)	IC REG CTRLR DDR 1OUT 16TSSOP
ON Semiconductor FIN1027MObsolete	Integrated Circuits (ICs)	LVDS DRIVER, LVDS DIFFERENTIAL DRIVER, -40 °C, 85 °C, 3 V, 3.6 V, SOIC
ON Semiconductor TMC2111AR3C	Integrated Circuits (ICs)	PIPELINE REGISTER, 8-BIT PQCC28
ON Semiconductor SLV4HC4053ADWRGObsolete	Integrated Circuits (ICs)	LDO REGULATOR, ULTRA-LOW NOISE,
ON Semiconductor FOD4218V	Isolators	OPTOCOUPLER, DIP, 6 PINS, 5 KV, NON ZERO CROSSING, 800 V, FOD4218 SERIES
ON Semiconductor NVMFD5483NLT1GObsolete	Discrete Semiconductor Products	DUAL N-CHANNEL POWER MOSFET 60V, 24A, 36MΩ
ON Semiconductor 2SD1804S-TL-E	Discrete Semiconductor Products	BIP NPN 8A 50V

Series	Category	# Parts	Status	Description

NCS20084Operational Amplifier, 5.5V Rail-to-Rail Input and Output, 1.2 MHz, Quad	Integrated Circuits (ICs)	4	Active	The NCS20081/2/4 operational amplifiers provide rail−to−rail input and output operation, 1.2 MHz bandwidth, and are available in single, dual, and quad configurations. Rail−to−rail operation gives designers use of the entire supply voltage range while taking advantage of the 1.2 MHz bandwidth. The NCS20081/2/4 can operate on supply voltages from 1.8 to 5.5 V over a temperature range from −40 to 125°C. At a 1.8 V supply, this device has a slew rate of 0.4 V/µs while consuming only 42 µA of quiescent current per channel. Since this is a CMOS device, high input impedance and low bias currents make it ideal for interfacing to a wide variety of signal sensors. The NCS20081/2/4 devices are available in a variety of compact packages.Product Family:
NCS20091Operational Amplifier, 5.5V Rail-to-Rail Input and Output, 350 kHz, Single	Amplifiers	5	Active	The NCS2009x series operational amplifiers provide rail−to−rail input and output operation, 350 kHz bandwidth, and are available in single, dual, and quad configurations. Rail−to−rail operation gives designers use of the entire supply voltage range while taking advantage of the 350 kHz bandwidth. The NCS2009x can operate on supply voltages from 1.8 to 5.5 V over a temperature range from −40 to 125°C. At a 1.8 V supply, this device has a slew rate of 0.15 V/µs while consuming only 20 µA of quiescent current per channel. Since this is a CMOS device, high input impedance and low bias currents make it ideal for interfacing to a wide variety of signal sensors. The NCS2009x devices are available in a variety of compact packages.Product Family:
NCS20092Operational Amplifier, 5.5V Rail-to-Rail Input and Output, 350 kHz, Dual	Integrated Circuits (ICs)	4	Active	The NCS2009x series operational amplifiers provide rail−to−rail input and output operation, 350 kHz bandwidth, and are available in single, dual, and quad configurations. Rail−to−rail operation gives designers use of the entire supply voltage range while taking advantage of the 350 kHz bandwidth. The NCS2009x can operate on supply voltages from 1.8 to 5.5 V over a temperature range from −40 to 125°C. At a 1.8 V supply, this device has a slew rate of 0.15 V/µs while consuming only 20 µA of quiescent current per channel. Since this is a CMOS device, high input impedance and low bias currents make it ideal for interfacing to a wide variety of signal sensors. The NCS2009x devices are available in a variety of compact packages.Product Family:
NCS20094Operational Amplifier, 5.5V Rail-to-Rail Input and Output, 350 kHz, Quad	Instrumentation, Op Amps, Buffer Amps	3	Active	The NCS2009x series operational amplifiers provide rail−to−rail input and output operation, 350 kHz bandwidth, and are available in single, dual, and quad configurations. Rail−to−rail operation gives designers use of the entire supply voltage range while taking advantage of the 350 kHz bandwidth. The NCS2009x can operate on supply voltages from 1.8 to 5.5 V over a temperature range from −40 to 125°C. At a 1.8 V supply, this device has a slew rate of 0.15 V/µs while consuming only 20 µA of quiescent current per channel. Since this is a CMOS device, high input impedance and low bias currents make it ideal for interfacing to a wide variety of signal sensors. The NCS2009x devices are available in a variety of compact packages.Product Family:
NCS20231Operational Amplifier, 36 V, 3 MHz, 0.95 mV Input Offset Voltage, Rail-to-Rail	Linear	1	Active	The NCS2023x series of op amps feature a wide supply range of 2.7 V to 36 V with an input offset voltage as low as ±0.95 mV max. These op amps are available in single, dual, and quad channel configurations. Automotive qualified options are available under the NCV prefix with an optional extended operating temperature range from −40°C to 150°C. All other versions are specified over the operating temperature range from −40°C to 125°C.
NCS210RCurrent Sense Amplifier, 26V, Low-/High-Side Voltage Out, Bidirectional Current Shunt Monitor	Integrated Circuits (ICs)	3	Active	The NCS210R and NCV210R (AEC- Q100 qualified) are voltage output current sense amplifiers that can measure voltage across shunts at common−mode voltages from −0.3 V to 26 V, independent of supply voltage. With a fixed gain of 200 V/V, the low offset of the zero−drift architecture enables current sensing with maximum drops across the shunt as low as 10 mV full−scale. These devices can operate from a single +2.2 V to +26 V power supply, drawing a maximum of 80 µA of supply current. Available in UQFN and SC70 packagesAdditional gain options are available: NCS213R (50 V/V), NCS214R (100 V/V), NCS211R (500 V/V)
NCS211RCurrent Sense Amplifier, 26V, Low-/High-Side Voltage Out, Bidirectional Current Shunt Monitor	Instrumentation, Op Amps, Buffer Amps	1	Active	The NCS211R and NCV211R (AEC- Q100 qualified) are voltage output, current sense amplifiers that can measure voltage across shunts at common−mode voltages from −0.3 V to 26 V, independent of supply voltage. With a fixed gain of 500 V/V, the low offset of the zero−drift architecture enables current sensing across the shunt with maximum voltage drops as low as 10 mV full−scale. These devices can operate from a single +2.2 V to +26 V power supply, drawing a maximum of 80 µA of supply current. Available in SC70-6 packageAdditional gain options are available: NCS213R (50 V/V), NCS214R (100 V/V) , NCS210R (200 V/V)
NCS213RCurrent Sense Amplifier, 26V, Low-/High-Side Voltage Out, Bidirectional Current Shunt Monitor	Integrated Circuits (ICs)	3	Active	The NCS213R and NCV213R (AEC- Q100 qualified) are voltage output, current sense amplifiers that can measure voltage across shunts at common−mode voltages from −0.3 V to 26 V, independent of supply voltage. With a fixed gain of 50 V/V, the low offset of the zero−drift architecture enables current sensing across the shunt with maximum voltage drops as low as 10 mV full−scale. These devices can operate from a single +2.2 V to +26 V power supply, drawing a maximum of 80 µA of supply current. Available in SC70-6 package. Additional gain options are available: NCS214R (100 V/V), NCS210R (200 V/V), NCS211R (500 V/V)
NCS214RCurrent Sense Amplifier, 26V, Low-/High-Side Voltage Out, Bidirectional Current Shunt Monitor	Linear	3	Active	The NCS214R and NCV214R (AEC- Q100 qualified) are voltage output, current sense amplifiers that can measure voltage across shunts at common−mode voltages from −0.3 V to 26 V, independent of supply voltage. With a fixed gain of 100V/V, the low offset of the zero−drift architecture enables current sensing across the shunt with maximum vooltage drops as low as 10 mV full−scale. These devices can operate from a single +2.2 V to +26 V power supply, drawing a maximum of 80 µA of supply current. Available in SC70-6 and UQFN10 packages.Additional gain options are available: NCS213R (50 V/V), NCS210R (200 V/V), NCS211R (500 V/V)
NCS21671Current-Shunt Monitors, Zero-Drift, 40 V Common Mode, Bidirectional, Shutdown	Amplifiers	10	Active	The NCS21671 and NCV21671 are a series of voltage output current sense amplifiers offered in gains of 25, 50, 100, and 200 V/V. These parts can measure voltage across shunts at common mode voltages from -0.1 V to 40 V, independent of supply voltage. The low offset of the zero-drift architecture enables current sensing with voltage drops across sense resistors as low as 10 mV full-scale. An optional enable function is provided to reduce current drain through the input pins and power supply pins to negligible levels. Two optional pins are included to simplify input filtering. These devices can operate from a single +1.8 V to +5.5 V power supply, drawing a maximum of 40 μA of supply current. These parts are available in Micro10 and SC70-6 packages.