Beta

⌘K

O

ON Semiconductor

Series List(12147)

...

...

Series	Category	# Parts	Status	Description

Standalone parts(10272)

...

Part	Category	Description
ON Semiconductor NCV8402AMNWT1G	Integrated Circuits (ICs)	SELF-PROTECTED N-CHANNEL POWER MOSFET/ REEL
ON Semiconductor 74AC32PCObsolete	Integrated Circuits (ICs)	IC GATE OR 4CH 2-INP 14MDIP
ON Semiconductor FGI3236-F085	Discrete Semiconductor Products	IGBT, 360V, 27A, 1.32V, 320MJ, TO-262<BR>ECOSPARK® I, N-CHANNEL IGNITION
ON Semiconductor FAN1655MTFXObsolete	Integrated Circuits (ICs)	IC REG CTRLR DDR 1OUT 16TSSOP
ON Semiconductor FIN1027MObsolete	Integrated Circuits (ICs)	LVDS DRIVER, LVDS DIFFERENTIAL DRIVER, -40 °C, 85 °C, 3 V, 3.6 V, SOIC
ON Semiconductor TMC2111AR3C	Integrated Circuits (ICs)	PIPELINE REGISTER, 8-BIT PQCC28
ON Semiconductor SLV4HC4053ADWRGObsolete	Integrated Circuits (ICs)	LDO REGULATOR, ULTRA-LOW NOISE,
ON Semiconductor FOD4218V	Isolators	OPTOCOUPLER, DIP, 6 PINS, 5 KV, NON ZERO CROSSING, 800 V, FOD4218 SERIES
ON Semiconductor NVMFD5483NLT1GObsolete	Discrete Semiconductor Products	DUAL N-CHANNEL POWER MOSFET 60V, 24A, 36MΩ
ON Semiconductor 2SD1804S-TL-E	Discrete Semiconductor Products	BIP NPN 8A 50V

Series	Category	# Parts	Status	Description

NCL31000Intelligent LED Driver, Visible Light Communication capable, with Precision Dimming, Diagnostics and Power Metrology	Integrated Circuits (ICs)	2	Obsolete	Intelligent LED Driver, Visible Light Communication capable, with Precision Dimming, Diagnostics and Power Metrology
NCL31001Intelligent LED Driver, Multi-Channel Enabled with Precision Dimming, Diagnostics and Power Metrology	LED Drivers	2	Active	Intelligent LED Driver, Multi-Channel Enabled with Precision Dimming, Diagnostics and Power Metrology
NCL31010PoE Interface LED Driver, Visible Light Communication capable	Integrated Circuits (ICs)	1	Obsolete	PoE Interface LED Driver, Visible Light Communication capable
NCL38046Precise CC/CV/CP Secondary-side Controller Compatible with Analog and PWM Dimming Signal	Integrated Circuits (ICs)	1	Active	The NCL38046 is a high performance Constant Current and Constant Voltage amplifier with low input offset voltage. It can enable to extend system dimming range under 1%. Also can support programmable constant power regulation to protect LED load and to provide wide output operating range.
NCN1154DP3T Data Switch, USB 2.0 High Speed / Audio, with Negative Swing Capability	Analog Switches - Special Purpose	1	Active	The NCN1154 is a DP3T switch for combined true-ground audio, USB 2.0 high speed data, and UART applications. It allows portable systems to use a single port to pass either USB data or audio signals from an external headset; the 3 channels being compliant to USB 2.0, USB 1.1 and USB 1.0. The switch is capable of passing signals with negative voltages as low as 2 V below ground. The NCN1154 features shunt resistors on the audio ports. These resistors are switched in when the audio channel is off and provide a safe path to ground for any charge that may build up on the audio lines. This reduces Pop & Click noise in the audio system. The device has an extended VCCrange which can operate off VCCup to 4.2 V while passing true ground audio signals down to -2 V.
NCN1188Data Switch, 3:1 High Speed USB Switch with Audio and MHL Capability	Analog Switches - Special Purpose	1	Active	The NCN1188 allows portable systems to share a single USB 2.0 or 3.0 receptacle to transmit and receive paired signals from three separate locations. All of the three differential channels are compliant to High Speed USB 2.0, Full Speed USB 1.1, Low Speed USB 1.0 and any generic UART protocol. The two dedicated high speed data paths also support Mobile High Definition Link (MHL) video up to resolutions of 1080i (2.25 Gbps) and 1080p (3 Gbps in PackedPixel mode). The multi-purpose audio path is capable of passing signals with negative voltages as low as 2 V below ground and features shunt resistors to reduce Pop and Click noise in the audio system. The NCN1188 is housed in a space saving, ultra low profile 2.0 x 1.7 x 0.5 mm, 12 pins UQFN package.
NCN2500USB Single Channel Transceiver	Drivers, Receivers, Transceivers	2	Obsolete	The NCN2500 Integrated Circuit is a single channel transceiver designed to accommodate the physical USB Port with a micro controller digital I/O.The part is fully USB compliants and supports the full 12Mbps speed.On the other hand, the NCN2500 device includes the pull-up resistors as defined by the USB-ECN new specifications.
NCN3411Data Switch, 4-Channel Differential, 1:2 Mux/Demux, for PCI Express Gen3	Analog Switches - Special Purpose	1	Obsolete	The NCN3411 is a 4-Channel differential SPDT switch designed to route PCI Express Gen3 signals. When used in a PCI Express application, the switch can handle up to two PCIe lanes. Due to the ultra-low ON-state capacitance (2 pF typ) and resistance (7.5 Ω typ), these switches are ideal for switching high frequency data signals up to a signal bit rate of 8 Gbps. This switch pinout is designed to be used in BTX form factor desktop PCs and is available in a space-saving 3.5 x 9 x 0.75 mm WQFN42 package.
NCN3612BData Switch, 6-Differential Channel 1:2 Switch for PCIe 3.0 and Display Port 1.2	Integrated Circuits (ICs)	1	Obsolete	The NCN3612B is a 6-Channel differential SPDT switch designed to route PCI Express Gen3 and/or DisplayPort 1.2 signals. Due to the ultra-low ON-state capacitance (2.1 pF typ) and resistance (8 Ω typ), this switch is ideal for switching high frequency signals up to a signal bit rate (BR) of 8 Gbps. This switch pinout is designed to be used in BTX form factor desktop PCs and is available in a space-saving 5x11x0.75 mm WQFN56 package. The NCN3612B uses 80% less quiescent power than other comparable PCIe switches.
NCN4555SIM Card Power Supply and Level Translator	Evaluation and Demonstration Boards and Kits	3	Obsolete	The NCN4555 is a level shifter analog circuit designed to translate the voltages between a SIM Card and an external microcontroller or MPU. A built-in LDO-type DC/DC converter makes the NCN4555 useable to drive 1.8 V and 3.0 V SIM card. The device fulfills the ISO7816-3 smart card interface standard as well as GSM 11.11 and related (11.12 and 11.18) and 3G mobile requirements (IMT-2000/3G TS 31.101).