| Isolators | 1 | Active | |
| Fuseholders | 1 | Active | Quickly add circuit protection for accessory lighting, panel displays, and electronics using the ATO® FHAC Series 32V Standard-Duty Waterproof In-Line Fuse Holder. This blade fuse holder features a built-in protective cover to provide an IP67-rated waterproof and dust-tight enclosure. This standard-duty configuration (FHAC0001LXN) is compatible with ATO® blade fuses from 1A to 20A (sold separately). Its black 16 AWG GXL wire leads make in-line installation simple. |
| Fuseholders | 1 | Active | Quickly add circuit protection for air conditioners and blower motors using the ATO® FHAC Series 32V Heavy-Duty Waterproof In-Line Fuse Holder. This blade fuse holder features a built-in protective cover to provide an IP67-rated waterproof and dust-tight enclosure. This heavy-duty configuration (FHAC0002SXJ) is compatible with ATO® blade fuses up to 30A (sold separately). Its 3.524" (89.5 mm) orange 12 AWG GXL wire leads with 0.25" (6.35 mm) end strips make in-line installation simple. |
| Circuit Protection | 1 | Active | Quickly add circuit protection for air conditioners and blower motors using the ATO® FHAC Series 32V Heavy-Duty Waterproof In-Line Fuse Holder. This blade fuse holder features a built-in protective cover to provide an IP67-rated waterproof and dust-tight enclosure. This heavy-duty configuration (FHAC0002ZXJ) is compatible with ATO® blade fuses up to 30A (sold separately). Its 3.524" (89.5 mm) orange 12 AWG GXL wire leads with 0.25" (6.35 mm) end strips make in-line installation simple. |
| Fuseholders | 1 | Active | Quickly add circuit protection for air conditioners and blower motors using the ATO® FHAC Series 32V Heavy-Duty Waterproof In-Line Fuse Holder. This blade fuse holder features a built-in protective cover to provide an IP67-rated waterproof and dust-tight enclosure. This heavy-duty configuration (FHAC0002ZXJD) is compatible with ATO® blade fuses up to 30A (sold separately). Its 4" (101.6 mm) purple UL 3266 wire leads with 0.315" (8 mm) end strips make in-line installation simple. |
| Fuseholders | 1 | Active | Easily install a JCASE® cartridge fuse up to 60 amps (sold separately) using the JCASE® FHJ Series 32V In-Line Cartridge Fuse Holder. The JCASE® FHJ Series fuse holder features black TPV housing with a UL 94 V-0 flammability rating and comes with tin-plated copper alloy contacts for reliable fuse installation. This model of the in-line fuse holder (FHJC1002L) features red 8 AWG GXL leads for simple installation and an integrated cover for added protection in harsh environments. |
| Circuit Protection | 1 | Active | Designed for primary power distribution, the FLEC™ Series Flexible Electrical Center Power Distribution Module (FLEC3000Z-0U) accommodates up to 28 MINI® fuses (sold separately) and up to 18 ISO Micro relays (sold separately) in a compact, sealed footprint. The internal printed circuit board (PCB) technologies used in the FLEC™ are highly reliable and reduce the risk of wiring faults. Plus, the use of connectorized interfaces, rather than hard-wired technologies, reduces factory assembly efforts. In addition, the FLEC™ sealed PDM carries an IP67 rating, which allows it to be mounted in locations susceptible to moisture and dirt without any adverse effects. |
| Magnetic, Reed Switches | 1 | Active | A sub-miniature, normally open switch with a 14.00mm long x 2.28mm diameter (0.551" x 0.090") glass envelope and longer than standard, flexible, easily formed leads, capable of switching 200Vdc at 10W. Available sensitivity range of 10-30 AT. High insulation resistance of 1010 ohms minimum and low contact resistance of less than 100 milliohms. Ideally suited for signal switching applications. Also suitable for reed relays, security, metering, limit sensing, telecom, office equipment and household appliances. |
| Magnetic, Reed Switches | 1 | Active | A sub-miniature, normally open switch with a 14.00mm long x 2.28mm diameter (0.551" x 0.090") glass envelope and longer than standard, flexible, easily formed leads, capable of switching 200Vdc at 10W. Available sensitivity range of 10-30 AT. High insulation resistance of 1010 ohms minimum and low contact resistance of less than 100 milliohms. Ideally suited for signal switching applications. Also suitable for reed relays, security, metering, limit sensing, telecom, office equipment and household appliances. |
| Electrical, Specialty Fuses | 1 | Active | FLM.100 is a Midget fuse with an ampere rating of 0.1. |
