PIC18F13K22 Series

Newer Device Available PIC18F24Q10

Catalog

Newer Device Available PIC18F24Q10

Part	Data Converters	Data Converters	Program Memory Size	Program Memory Type	Core Processor	Package / Case	Package / Case	Package / Case	Number of I/O	Speed	Core Size	Oscillator Type	Supplier Device Package	Operating Temperature [Max]	Operating Temperature [Min]	RAM Size	EEPROM Size	Mounting Type	Voltage - Supply (Vcc/Vdd) [Min]	Voltage - Supply (Vcc/Vdd) [Max]	RAM Size	Connectivity	Package / Case [y]	Package / Case [y]
Microchip Technology PIC18LF13K50-I/P	A/D	10 b 11	8 KB	FLASH	PIC	20-DIP	7.62 mm	0.3 in	14	48 MHz	8-Bit	Internal	20-PDIP	85 °C	-40 °C	512	256 x 8	Through Hole	1.8 V	3.6 V
Microchip Technology PIC18F13K22T-I/ML		10 b 12	8 KB	FLASH	PIC	20-VFQFN Exposed Pad			17	64 MHz	8-Bit	Internal	20-QFN (4x4)	85 °C	-40 °C		256 x 8	Surface Mount	2.3 V	5.5 V	256 x 8	I2C LINbus SPI UART/USART
Microchip Technology PIC18F13K22-E/SS		10 b 12	8 KB	FLASH	PIC	20-SSOP			17	48 MHz	8-Bit	Internal	20-SSOP	125 °C	-40 °C		256 x 8	Surface Mount	2.3 V	5.5 V	256 x 8	I2C LINbus SPI UART/USART
Microchip Technology PIC18F13K50-I/P	A/D	10 b 11	8 KB	FLASH	PIC	20-DIP	7.62 mm	0.3 in	14	48 MHz	8-Bit	Internal	20-PDIP	85 °C	-40 °C	512	256 x 8	Through Hole	1.8 V	5.5 V
Microchip Technology PIC18LF13K50T-I/SO	A/D	10 b 11	8 KB	FLASH	PIC	20-SOIC			14	48 MHz	8-Bit	Internal	20-SOIC	85 °C	-40 °C	512	256 x 8	Surface Mount	1.8 V	3.6 V			0.295 in	7.5 mm
Microchip Technology PIC18LF13K22T-I/SO		10 b 12	8 KB	FLASH	PIC	20-SOIC			17	64 MHz	8-Bit	Internal	20-SOIC	85 °C	-40 °C		256 x 8	Surface Mount	1.8 V	3.6 V	256 x 8	I2C LINbus SPI UART/USART	0.295 in	7.5 mm
Microchip Technology PIC18F13K22-I/P		10 b 12	8 KB	FLASH	PIC	20-DIP	7.62 mm	0.3 in	17	64 MHz	8-Bit	Internal	20-PDIP	85 °C	-40 °C		256 x 8	Through Hole	2.3 V	5.5 V	256 x 8	I2C LINbus SPI UART/USART
Microchip Technology PIC18F13K50-I/SO	A/D	10 b 11	8 KB	FLASH	PIC	20-SOIC			14	48 MHz	8-Bit	Internal	20-SOIC	85 °C	-40 °C	512	256 x 8	Surface Mount	1.8 V	5.5 V			0.295 in	7.5 mm
Microchip Technology PIC18F13K22T-I/SS		10 b 12	8 KB	FLASH	PIC	20-SSOP			17	64 MHz	8-Bit	Internal	20-SSOP	85 °C	-40 °C		256 x 8	Surface Mount	2.3 V	5.5 V	256 x 8	I2C LINbus SPI UART/USART
Microchip Technology PIC18LF13K50-I/SO	A/D	10 b 11	8 KB	FLASH	PIC	20-SOIC			14	48 MHz	8-Bit	Internal	20-SOIC	85 °C	-40 °C	512	256 x 8	Surface Mount	1.8 V	3.6 V			0.295 in	7.5 mm

Catalog

Newer Device Available PIC18F24Q10

Key Features

• * C Compiler optimized architecture

• * 256 bytes data EEPROM

• * Linear program memory addressing to 16 Kbytes

• * Linear data memory addressing to 512 bytes

• * Sleep mode: 50 nA, typical

• * Watchdog Timer: 600 nA, typical

• * Timer1 Oscillator: 800 nA @ 32 kHz, typical

• * Factory calibrated to ± 1%

• * Software selectable frequencies range of 31 kHz to 16 MHz

• * 64 MHz performance available using PLL

• * No external components required

• * Four crystal modes up to 64 MHz

• * Fail-Safe Clock Monitor

• * Allows for safe shutdown if peripheral clock stops

• * Two-Speed Oscillator Start-up

• * Operating voltage 1.8V- 5.5V (with low voltage option 1.8V-3.6V)

• * Self-reprogrammable under software control

• * Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)

• * Programmable Brown-out Reset (BOR)

• * Extended Watchdog Timer (WDT) with on-chip oscillator and software enable

• * In-Circuit Serial Programming™ (ICSP™) via two pins

• * In-Circuit Debug via two pins

• * 12 Ch. 10-bit Analog-to-Digital (A/D) Converter module:

• * 2 rail-to-rail Analog Comparators module with:

• * Programmable on-chip voltage reference (CVREF) module (% of VDD)

• * Selectable Fixed voltage reference (FVR) with multiple reference voltages

• * High current sink/source 25 mA/25 mA

• * Three external interrupt pins

• * 3 16-bit timers/counters with prescaler

• * 1 8-bit timer/counter with 8-bit period register, prescaler and postscaler

• * Programmable dead time

• * Auto-shutdown and Auto-restart

• * 3-wire SPI (supports all 4 SPI modes)

• * I2C™ Master and Slave modes (Slave mode with address masking)

• * Supports RS-232, RS-485 and LIN 2.0

• * Auto-Baud Detect

• * Confi gurable inputs and outputs

• * Supports mTouch™ capacitive sensing applications

Description

Introducing the nanoWatt XLP PIC18F1XK22 Flash microcontroller: not too big, not too small… just right! This new family of devices offer all of the advantages of the well recognized PIC18F High Performance MCUs; 8-bit, C compiler optimized architecture and an industry leading peripheral set now available in a low pin-count option. These new 20-pin products include a 16 MHz precision Internal Oscillator which can be used with the standard 4X PLL to produce 16 MIPS of performance (64 MHz @ 3V). Standard analog peripherals include 12 channels of 10-bit A/D, Dual Rail-Rail Comparators with improved input/output multiplexing and an on-chip selectable Fixed Voltage Reference. Digital peripherals include an Enhanced Capture/Compare/PWM (ECCP+) module with PWM steering and a Master Synchronous Serial Port (MI2C,SPI) module with software controllable address masking. These devices also feature the SR Latch mode which supports capacitive sensing applications. In addition to these peripherals, the devices feature several microcontroller monitors that provide for reliable operation including BOR (Brown Out Reset) with software enable, POR (Power On Reset) and an Extended WDT. The addition of nanoWatt XLP technology make these devices ideally suited for battery powered applications or designs where power consumption is constrained.