DS92LV010A Series

Bus LVDS 3.3/5.0-V single transceiver

Catalog

Bus LVDS 3.3/5.0-V single transceiver

Part	Mounting Type	Package / Case	Package / Case [y]	Package / Case [x]	Duplex	Operating Temperature [Max]	Operating Temperature [Min]	Supplier Device Package	Type	Protocol	Voltage - Supply [Max]	Voltage - Supply [Min]	Data Rate
Texas Instruments DS92LV010ATMX/NOPB	Surface Mount	8-SOIC	3.9 mm	0.154 in	Half	85 °C	-40 °C	8-SOIC	Transceiver	LVDS	5.5 V	3 V	100 Mbps
Texas Instruments DS92LV010ATM/NOPB	Surface Mount	8-SOIC	3.9 mm	0.154 in	Half	85 °C	-40 °C	8-SOIC	Transceiver	LVDS	5.5 V	3 V	100 Mbps
Texas Instruments DS92LV010ATMX	Surface Mount	8-SOIC	3.9 mm	0.154 in	Half	85 °C	-40 °C		Transceiver	LVDS	5.5 V	3 V	100 Mbps
Texas Instruments DS92LV010ATM	Surface Mount	8-SOIC	3.9 mm	0.154 in	Half	85 °C	-40 °C		Transceiver	LVDS	5.5 V	3 V	100 Mbps

Catalog

Bus LVDS 3.3/5.0-V single transceiver

Key Features

• Bus LVDS Signaling (BLVDS)Designed for Double Termination ApplicationsBalanced Output ImpedanceLite Bus Loading 5pF TypicalGlitch Free Power Up/Down (Driver Disabled)3.3V or 5.0V Operation±1V Common Mode Range±100mV Receiver SensitivityHigh Signaling Rate Capability (Above 100 Mbps)Low Power CMOS DesignProduct Offered in 8 Lead SOIC PackageIndustrial Temperature Range OperationAll trademarks are the property of their respective owners.Bus LVDS Signaling (BLVDS)Designed for Double Termination ApplicationsBalanced Output ImpedanceLite Bus Loading 5pF TypicalGlitch Free Power Up/Down (Driver Disabled)3.3V or 5.0V Operation±1V Common Mode Range±100mV Receiver SensitivityHigh Signaling Rate Capability (Above 100 Mbps)Low Power CMOS DesignProduct Offered in 8 Lead SOIC PackageIndustrial Temperature Range OperationAll trademarks are the property of their respective owners.

Description

The DS92LV010A is one in a series of transceivers designed specifically for the high speed, low power proprietary bus backplane interfaces. The device operates from a single 3.3V or 5.0V power supply and includes one differential line driver and one receiver. To minimize bus loading the driver outputs and receiver inputs are internally connected. The logic interface provides maximum flexibility as 4 separate lines are provided (DIN, DE,RE, and ROUT). The device also features flow through which allows easy PCB routing for short stubs between the bus pins and the connector. The driver has 10 mA drive capability, allowing it to drive heavily loaded backplanes, with impedance as low as 27 Ohms. The driver translates between TTL levels (single-ended) to Low Voltage Differential Signaling levels. This allows for high speed operation, while consuming minimal power with reduced EMI. In addition the differential signaling provides common mode noise rejection of ±1V. The receiver threshold is ±100mV over a ±1V common mode range and translates the low voltage differential levels to standard (CMOS/TTL) levels. The DS92LV010A is one in a series of transceivers designed specifically for the high speed, low power proprietary bus backplane interfaces. The device operates from a single 3.3V or 5.0V power supply and includes one differential line driver and one receiver. To minimize bus loading the driver outputs and receiver inputs are internally connected. The logic interface provides maximum flexibility as 4 separate lines are provided (DIN, DE,RE, and ROUT). The device also features flow through which allows easy PCB routing for short stubs between the bus pins and the connector. The driver has 10 mA drive capability, allowing it to drive heavily loaded backplanes, with impedance as low as 27 Ohms. The driver translates between TTL levels (single-ended) to Low Voltage Differential Signaling levels. This allows for high speed operation, while consuming minimal power with reduced EMI. In addition the differential signaling provides common mode noise rejection of ±1V. The receiver threshold is ±100mV over a ±1V common mode range and translates the low voltage differential levels to standard (CMOS/TTL) levels.