AT91SAM7S512 Series

Catalog

ARM MCU, SAM 32 FAMILY AT91SAM7S SERIES MICROCONTROLLERS, ARM7TDMI, 32 BIT, 55 MHZ, 512 KB

Part	Core Size [Min]	Core Size [Max]	Operating Temperature [Max]	Operating Temperature [Min]	Supplier Device Package	Program Memory Size	Program Memory Type	Data Converters [custom]	Data Converters [custom]	Peripherals	Connectivity	Speed	Mounting Type	Core Processor	Package / Case	RAM Size	Number of I/O	Oscillator Type
Microchip Technology AT91SAM7S512B-MU-999	16 Bit	32 Bit	85 °C	-40 °C	64-QFN (9x9)	512 KB	FLASH	8	10	Brown-out Detect/Reset DMA POR PWM WDT	I2C SPI SSC UART/USART USB	55 MHz	Surface Mount	ARM7®	64-VFQFN Exposed Pad	64 K	32	Internal
Microchip Technology AT91SAM7S512-MU-999	16 Bit	32 Bit	85 °C	-40 °C	64-QFN (9x9)	512 KB	FLASH	8	10	Brown-out Detect/Reset DMA POR PWM WDT	I2C SPI SSC UART/USART USB	55 MHz	Surface Mount	ARM7®	64-VFQFN Exposed Pad	64 K	32	Internal
Microchip Technology AT91SAM7S512-AU	16 Bit	32 Bit	85 °C	-40 °C	64-LQFP (10x10)	512 KB	FLASH	8	10	Brown-out Detect/Reset DMA POR PWM WDT	I2C SPI SSC UART/USART USB	55 MHz	Surface Mount	ARM7®	64-LQFP	64 K	32	Internal
Microchip Technology AT91SAM7S512-AU-999	16 Bit	32 Bit	85 °C	-40 °C	64-LQFP (10x10)	512 KB	FLASH	8	10	Brown-out Detect/Reset DMA POR PWM WDT	I2C SPI SSC UART/USART USB	55 MHz	Surface Mount	ARM7®	64-LQFP	64 K	32	Internal
Microchip Technology AT91SAM7S512B-AU	16 Bit	32 Bit	85 °C	-40 °C	64-LQFP (10x10)	512 KB	FLASH	8	10	Brown-out Detect/Reset DMA POR PWM WDT	I2C SPI SSC UART/USART USB	55 MHz	Surface Mount	ARM7®	64-LQFP	64 K	32	Internal
Microchip Technology AT91SAM7S512B-MU	16 Bit	32 Bit	85 °C	-40 °C	64-QFN (9x9)	512 KB	FLASH	8	10	Brown-out Detect/Reset DMA POR PWM WDT	I2C SPI SSC UART/USART USB	55 MHz	Surface Mount	ARM7®	64-VFQFN Exposed Pad	64 K	32	Internal
Microchip Technology AT91SAM7S512B-AU-999	16 Bit	32 Bit	85 °C	-40 °C	64-LQFP (10x10)	512 KB	FLASH	8	10	Brown-out Detect/Reset DMA POR PWM WDT	I2C SPI SSC UART/USART USB	55 MHz	Surface Mount	ARM7®	64-LQFP	64 K	32	Internal

Catalog

Key Features

• * ARM7TDMI® ARM® Thumb® Processor 32-bit RISC Architecture

• * High-density 16-bit Instruction Set

• * EmbeddedICE™ In-circuit Emulation, Debug Communication Channel Support

• * 512 Kbytes (SAM7S512) Organized in Two Contiguous Banks of 1024 Pages of 256

• Bytes (Dual Plane)

• * 64 Kbytes embedded SRAM, Single-cycle Access at Maximum Speed

• * Memory Controller (MC)

• * Memory Protection Unit

• * Embedded 1.8V Regulator, Drawing up to 100 mA for the Core and External Components

• * Based on Power-on Reset Cells and Low-power Factory-calibrated Brownout Detector

• * Low-power RC Oscillator, 3 to 20 MHz On-chip Oscillator and One PLL

• * Power Management Controller (PMC)

• * Advanced Interrupt Controller (AIC)

• * Two-wire UART and Support for Debug Communication Channel interrupt, Programmable ICE Access Prevention

• * 20-bit Programmable Counter plus 12-bit Interval Counter

• * Windowed Watchdog (WDT)

• * Real-time Timer (RTT)

• * 32 Parallel Input/Output Controllers (PIO)

• * Eleven Peripheral DMA Controller (PDC) Channels

• * Four High-current Drive I/O lines, Up to 16 mA Each

• * 64-lead LQFP

• * 64-pad QFN

• * One Synchronous Serial Controller (SSC)

• * Two Universal Synchronous/Asynchronous Receiver Transmitters (USART)

• * One Master/Slave Serial Peripheral Interfaces (SPI)

• * One USB 2.0 Full Speed (12 Mbits per second) Device Port

• * One Three-channel 16-bit Timer/Counter (TC)

• * One Four-channel 16-bit PWM Controller (PWMC)

• * One Two-wire Interface (TWI)

• * One 8-channel 10-bit Analog-to-Digital Converter, Four Channels Multiplexed with Digital I/Os

• * Up to 55 MHz at 1.8V and 85⋅ C Worst Case Conditions

• * Up to 48 MHz at 1.65V and 85⋅ C Worst Case Conditions

• * SAM-BA - Interface with SAM-BA Graphic User Interface

• * IEEE® 1149.1 JTAG Boundary Scan on All Digital Pins

Description

Microchip's ARM®-based SAM7S512 is a member of the SAM7S series of flash microcontrollers based on the 32-bit ARM7TDMI RISC processor. It operates at a maximum speed of 55MHz and features 512KB of dual bank flash memory and 64KB of SRAM. The peripheral set includes a Full Speed USB device and PHY at 12Mbps, UART, two USARTs, TWI (I2C), SPI, SSC, two PWM timers, three 16-bit timers,RTT, 8x10-bit ADC and 32 IO lines. It achieves single-cycle instruction access from embedded flash at 27 MIPS. The multi-layer bus matrix, multiple SRAM banks, PDC, and DMA support parallel tasks and maximize data throughput. The SAM7S512 operates from 1.65V to 3.6V and is available in 64-pin LQFP and QFN packages.