SN74ABT245BNSR
ActiveOCTAL BUS TRANSCEIVERS WITH 3-STATE OUTPUTS
Deep-Dive with AI
Search across all available documentation for this part.
SN74ABT245BNSR
ActiveOCTAL BUS TRANSCEIVERS WITH 3-STATE OUTPUTS
Technical Specifications
Parameters and characteristics for this part
| Specification | SN74ABT245BNSR |
|---|---|
| Current - Output High, Low [custom] | 64 mA |
| Current - Output High, Low [custom] | 32 mA |
| Mounting Type | Surface Mount |
| Number of Bits per Element | 8 |
| Number of Elements | 1 |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Output Type | 3-State |
| Package / Case | 20-SOIC |
| Package / Case | 0.209 " |
| Package / Case | 5.3 mm |
| Supplier Device Package | 20-SO |
| Voltage - Supply [Max] | 5.5 V |
| Voltage - Supply [Min] | 4.5 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 1.73 | |
| 10 | $ 1.55 | |||
| 25 | $ 1.46 | |||
| 100 | $ 1.25 | |||
| 250 | $ 1.17 | |||
| 500 | $ 1.03 | |||
| 1000 | $ 0.85 | |||
| Digi-Reel® | 1 | $ 1.73 | ||
| 10 | $ 1.55 | |||
| 25 | $ 1.46 | |||
| 100 | $ 1.25 | |||
| 250 | $ 1.17 | |||
| 500 | $ 1.03 | |||
| 1000 | $ 0.85 | |||
| Tape & Reel (TR) | 2000 | $ 0.84 | ||
| 4000 | $ 0.79 | |||
| 6000 | $ 0.77 | |||
| 10000 | $ 0.74 | |||
| Texas Instruments | LARGE T&R | 1 | $ 1.43 | |
| 100 | $ 1.10 | |||
| 250 | $ 0.81 | |||
| 1000 | $ 0.58 | |||
Description
General part information
SN74ABT245B Series
These octal bus transceivers are designed for asynchronous communication between data buses. The devices transmit data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE)\ input can be used to disable the device so the buses are effectively isolated.
To ensure the high-impedance state during power up or power down, OE\ should be tied to VCCthrough a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
This device is fully specified for hot-insertion applications using Ioffand power-up 3-state. The Ioffcircuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. The power-up 3-state circuitry places the outputs in the high-impedance state during power up and power down, which prevents driver conflict.
Documents
Technical documentation and resources
