SN74ABT245BDWR
ActiveOCTAL BUS TRANSCEIVERS WITH 3-STATE OUTPUTS
Deep-Dive with AI
Search across all available documentation for this part.
SN74ABT245BDWR
ActiveOCTAL BUS TRANSCEIVERS WITH 3-STATE OUTPUTS
Technical Specifications
Parameters and characteristics for this part
| Specification | SN74ABT245BDWR |
|---|---|
| Current - Output High, Low [custom] | 64 mA |
| Current - Output High, Low [custom] | 32 mA |
| Mounting Type | Surface Mount |
| Number of Bits per Element | 8 |
| Number of Elements | 1 |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Output Type | 3-State |
| Package / Case | 20-SOIC |
| Package / Case [y] | 0.295 in |
| Package / Case [y] | 7.5 mm |
| Supplier Device Package | 20-SOIC |
| Voltage - Supply [Max] | 5.5 V |
| Voltage - Supply [Min] | 4.5 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 0.97 | |
| 10 | $ 0.86 | |||
| 25 | $ 0.82 | |||
| 100 | $ 0.67 | |||
| 250 | $ 0.63 | |||
| 500 | $ 0.56 | |||
| 1000 | $ 0.44 | |||
| Digi-Reel® | 1 | $ 0.97 | ||
| 10 | $ 0.86 | |||
| 25 | $ 0.82 | |||
| 100 | $ 0.67 | |||
| 250 | $ 0.63 | |||
| 500 | $ 0.56 | |||
| 1000 | $ 0.44 | |||
| Tape & Reel (TR) | 2000 | $ 0.41 | ||
| 4000 | $ 0.40 | |||
| 6000 | $ 0.39 | |||
| 10000 | $ 0.37 | |||
| 14000 | $ 0.39 | |||
| 20000 | $ 0.39 | |||
| Texas Instruments | LARGE T&R | 1 | $ 0.72 | |
| 100 | $ 0.55 | |||
| 250 | $ 0.41 | |||
| 1000 | $ 0.29 | |||
Description
General part information
SN74ABT245B Series
These octal bus transceivers are designed for asynchronous communication between data buses. The devices transmit data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE)\ input can be used to disable the device so the buses are effectively isolated.
To ensure the high-impedance state during power up or power down, OE\ should be tied to VCCthrough a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
This device is fully specified for hot-insertion applications using Ioffand power-up 3-state. The Ioffcircuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. The power-up 3-state circuitry places the outputs in the high-impedance state during power up and power down, which prevents driver conflict.
Documents
Technical documentation and resources
