TPS54286PWPR
Active4.5V TO 28V INPUT, DUAL 2A OUTPUT, 600KHZ STEP-DOWN CONVERTER WITH INTERNAL COMPENSATION
Deep-Dive with AI
Search across all available documentation for this part.
TPS54286PWPR
Active4.5V TO 28V INPUT, DUAL 2A OUTPUT, 600KHZ STEP-DOWN CONVERTER WITH INTERNAL COMPENSATION
Technical Specifications
Parameters and characteristics for this part
| Specification | TPS54286PWPR |
|---|---|
| Current - Output | 2 A |
| Frequency - Switching | 630 kHz |
| Function | Step-Down |
| Mounting Type | Surface Mount |
| Number of Outputs | 2 |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Output Configuration | Positive |
| Output Type | Adjustable |
| Package / Case | 14-PowerTSSOP |
| Package / Case [x] | 0.173 in |
| Package / Case [y] | 4.4 mm |
| Supplier Device Package | 14-HTSSOP |
| Synchronous Rectifier | False |
| Topology | Buck |
| Voltage - Input (Max) [Max] | 28 V |
| Voltage - Input (Min) [Min] | 4.5 V |
| Voltage - Output (Max) | 25.2 V |
| Voltage - Output (Min/Fixed) | 0.8 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 3.41 | |
| 10 | $ 3.06 | |||
| 25 | $ 2.90 | |||
| 100 | $ 2.51 | |||
| 250 | $ 2.38 | |||
| 500 | $ 2.27 | |||
| Digi-Reel® | 1 | $ 3.41 | ||
| 10 | $ 3.06 | |||
| 25 | $ 2.90 | |||
| 100 | $ 2.51 | |||
| 250 | $ 2.38 | |||
| 500 | $ 2.27 | |||
| Tape & Reel (TR) | 2000 | $ 2.27 | ||
| Texas Instruments | LARGE T&R | 1 | $ 2.02 | |
| 100 | $ 1.67 | |||
| 250 | $ 1.20 | |||
| 1000 | $ 0.90 | |||
Description
General part information
TPS54286 Series
TPS54283 and TPS54286 are dual output non-synchronous buck converters capable of supporting 2-A output applications that operate from a 4.5-V to 28-V input supply voltage, and require output voltages between 0.8 V and 90% of the input voltage.
With internally-determined operating frequency, soft start time, and control loop compensation, these converters provide many features with a minimum of external components. Channel 1 overcurrent protection is set at 3 A, while Channel 2 overcurrent protection level is selected by connecting a pin to ground, to BP, or left floating. The setting levels are used to allow for scaling of external components for applications not needing the full load capability of both outputs.
The outputs may be enabled independently, or may be configured to allow either ratiometric or sequential startup sequencing. Additionally, the two outputs may also be powered from different sources.
