ADM3061EARMZ
Active3.0 V TO 5.5 V, ±12 KV IEC ESD PROTECTED, HALF DUPLEX 500 KBPS RS-485 TRANSCEIVER
Deep-Dive with AI
Search across all available documentation for this part.
ADM3061EARMZ
Active3.0 V TO 5.5 V, ±12 KV IEC ESD PROTECTED, HALF DUPLEX 500 KBPS RS-485 TRANSCEIVER
Technical Specifications
Parameters and characteristics for this part
| Specification | ADM3061EARMZ |
|---|---|
| Data Rate | 500 kbps |
| Duplex | Half |
| Mounting Type | Surface Mount |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Package / Case | 8-MSOP, 8-TSSOP |
| Package / Case | 3 mm |
| Package / Case [custom] | 0.118 in |
| Protocol | RS485 |
| Receiver Hysteresis | 30 mV |
| Supplier Device Package | 8-MSOP |
| Type | Transceiver |
| Voltage - Supply [Max] | 5.5 V |
| Voltage - Supply [Min] | 3 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Tube | 1 | $ 4.92 | |
| 10 | $ 3.28 | |||
| 25 | $ 2.85 | |||
| 50 | $ 2.42 | |||
| 100 | $ 2.37 | |||
| 250 | $ 2.14 | |||
| 500 | $ 2.00 | |||
| 1000 | $ 1.88 | |||
| 2500 | $ 1.76 | |||
| 5000 | $ 1.69 | |||
Description
General part information
ADM3061E Series
The ADM3061E/ADM3062E/ADM3063E/ADM3064E/ADM3065E/ADM3066E/ADM3067E/ADM3068Eare 3.0 V to 5.5 V, IEC electrostatic discharge (ESD) protected RS-485 transceivers, allowing the devices to withstand ±12 kV contact discharges on the transceiver bus pins without latch-up or damage. The ADM3062E/ADM3064E/ADM3066E/ADM3068E feature a VIOlogic supply pin that allows a flexible digital interface capable of operating as low as 1.62 V.The ADM3065E/ADM3066E/ADM3067E/ADM3068E are suitable for high speed, 50 Mbps, bidirectional data communication on multipoint bus transmission lines. The ADM3061E/ADM3062E/ADM3063E/ADM3064E/ADM3065E/ADM3066E/ADM3067E/ADM3068E feature a 1/4 unit load input impedance that allows up to 128 transceivers on a bus. The ADM3061E/ADM3062E/ADM3063E/ADM3064E models offer all of the same features as the ADM3065E/ADM3066E/ADM3067E/ADM3068E models at a low 500 kbps data rate that is suitable for operation over long cable runs.The ADM3061E/ADM3062E/ADM3065E/ADM3066E are halfduplex RS-485 transceivers, fully compliant to the PROFIBUS®standard with increased 2.1 V bus differential voltage at VCC≥ 4.5 V. The ADM3063E/ADM3064E/ADM3067E/ADM3068E are full duplex RS-485 transceiver options.The RS-485 transceivers are available in a number of spacesaving packages, including the 10-lead, 3 mm × 3 mm lead frame chip-scale package (LFCSP), the 8-lead or 10-lead, 3 mm × 3 mm mini small outline package (MSOP), and the 8-lead or 14-lead, narrow body standard small outline packages (SOIC_N). Models with operating temperature ranges of −40°C to +125°C and −40°C to +85°C are available.Excessive power dissipation caused by bus contention or by output shorting is prevented by a thermal shutdown circuit. If a significant temperature increase is detected in the internal driver circuitry during fault conditions, this feature forces the driver output into a high impedance state.The ADM3061E/ADM3062E/ADM3063E/ADM3064E/ADM3065E/ADM3066E/ADM3067E/ADM3068E guarantee a logic high receiver output when the receiver inputs are shorted, open, or connected to a terminated transmission line with all drivers disabled.Table 2 in the data sheet presents an overview of the ADM3061E/ADM3062E/ADM3063E/ADM3064E/ADM3065E/ADM3066E/ADM3067E/ADM3068E data rate capability across temperature, power supply, and package options. Refer to the Ordering Guide section for model numbering.APPLICATIONSIndustrial fieldbusesProcess controlBuilding automationPROFIBUS networksMotor control servo drives and encoders
Documents
Technical documentation and resources