MIC94066YML-TR
ActiveHIGH SIDE POWER SWITCH 8 VDFN 2X2X0.9MM T/R ROHS COMPLIANT: YES
Deep-Dive with AI
Search across all available documentation for this part.
MIC94066YML-TR
ActiveHIGH SIDE POWER SWITCH 8 VDFN 2X2X0.9MM T/R ROHS COMPLIANT: YES
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | MIC94066YML-TR |
|---|---|
| Current - Output (Max) [Max] | 2 A |
| Input Type | Non-Inverting |
| Interface | On/Off |
| Mounting Type | Surface Mount |
| Number of Outputs | 2 |
| Operating Temperature [Max] | 125 °C |
| Operating Temperature [Min] | -40 °C |
| Output Configuration | High Side |
| Output Type | P-Channel |
| Package / Case | 8-MLF®, 8-VFDFN Exposed Pad |
| Ratio - Input:Output [custom] | 1:1 |
| Rds On (Typ) | 85 mOhm |
| Supplier Device Package | 8-MLF® (2x2) |
| Switch Type | General Purpose |
| Voltage - Load [Max] | 5.5 V |
| Voltage - Load [Min] | 1.7 V |
| Voltage - Supply (Vcc/Vdd) | False |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 1.35 | |
| 25 | $ 1.13 | |||
| 100 | $ 1.02 | |||
| Digi-Reel® | 1 | $ 1.35 | ||
| 25 | $ 1.13 | |||
| 100 | $ 1.02 | |||
| Tape & Reel (TR) | 5000 | $ 1.02 | ||
| Microchip Direct | T/R | 1 | $ 1.35 | |
| 25 | $ 1.13 | |||
| 100 | $ 1.02 | |||
| 1000 | $ 0.99 | |||
| 5000 | $ 0.98 | |||
| Newark | Each (Supplied on Full Reel) | 100 | $ 1.05 | |
Description
General part information
MIC94066 Series
The MIC94066-69 are dual high-side load switches designed for operation between 1.7V to 5.5V. The devices contain a pair of low on-resistance, 115mΩ(max) P-channel MOSFETs that support over 2A of continuous current. The MIC94067 and MIC94069 feature an active load discharge circuit which insures capacitive loads retain no charge when the main switch is in an OFF state.
An active pull-down on the enable input keeps MIC94066-69 in a default OFF state until the EN pin is pulled to a high level. The built-in level shift circuitry allows for a logic signal that may be different from the supply voltage to switch the high-side P-channel MOSFET on or off.
MIC94066-67 feature rapid turn on while MIC94068-69 provide a slew rate controlled Soft-Start turn-on of 800µs (typical) to prevent in-rush current from glitching supply rails.
Documents
Technical documentation and resources