Integrated Circuits (ICs)

TXS0101DCKT

Active

1-BIT BIDIRECTIONAL VOLTAGE-LEVEL SHIFTER FOR OPEN-DRAIN AND PUSH-PULL APPLICATIONS

Deep-Dive with AI

Search across all available documentation for this part.

DocumentsUnderstanding Transient Drive Strength vs. DC Drive Strength in Level-Shifters (Rev. A)A Guide to Voltage Translation With TXS-Type Translators +10

Integrated Circuits (ICs)

TXS0101DCKT

Active

Texas Instruments

1-BIT BIDIRECTIONAL VOLTAGE-LEVEL SHIFTER FOR OPEN-DRAIN AND PUSH-PULL APPLICATIONS

Deep-Dive with AI

DocumentsUnderstanding Transient Drive Strength vs. DC Drive Strength in Level-Shifters (Rev. A)A Guide to Voltage Translation With TXS-Type Translators +10

Specifications Series Pricing Description Documents

Technical Specifications

Parameters and characteristics for this part

Specification	TXS0101DCKT

Channel Type	Bidirectional
Channels per Circuit	1
Data Rate	24 Mbps
Features	Auto-Direction Sensing
Mounting Type	Surface Mount
Number of Circuits	1
Operating Temperature [Max]	85 °C
Operating Temperature [Min]	-40 °C
Output Type	Open Drain, Push-Pull
Package / Case	6-TSSOP, SC-88, SOT-363
Supplier Device Package	SC-70-6
Translator Type	Voltage Level
Voltage - VCCA [Max]	3.6 V
Voltage - VCCA [Min]	1.65 V
Voltage - VCCB [Max]	5.5 V
Voltage - VCCB [Min]	2.3 V

TXS0101 Series

1-bit bidirectional voltage-level shifter for open-drain and push-pull applications

Part	Voltage - VCCB [Min]	Voltage - VCCB [Max]	Operating Temperature [Max]	Operating Temperature [Min]	Output Type	Number of Circuits	Features	Translator Type	Voltage - VCCA [Min]	Voltage - VCCA [Max]	Channels per Circuit	Package / Case	Supplier Device Package	Channel Type	Data Rate	Mounting Type
Texas Instruments TXS0101DRLR	2.3 V	5.5 V	85 °C	-40 °C	Open Drain Push-Pull	1	Auto-Direction Sensing	Voltage Level	1.65 V	3.6 V	1	SOT-563 SOT-666	SOT-5X3	Bidirectional	24 Mbps	Surface Mount
Texas Instruments TXS0101DBVRG4	2.3 V	5.5 V	85 °C	-40 °C	Open Drain Push-Pull	1	Auto-Direction Sensing	Voltage Level	1.65 V	3.6 V	1	SOT-23-6	SOT-23-6	Bidirectional	24 Mbps	Surface Mount
Texas Instruments TXS0101DBVR	2.3 V	5.5 V	85 °C	-40 °C	Open Drain Push-Pull	1	Auto-Direction Sensing	Voltage Level	1.65 V	3.6 V	1	SOT-23-6	SOT-23-6	Bidirectional	24 Mbps	Surface Mount
Texas Instruments TXS0101DRLRG4	2.3 V	5.5 V	85 °C	-40 °C	Open Drain Push-Pull	1	Auto-Direction Sensing	Voltage Level	1.65 V	3.6 V	1	SOT-563 SOT-666	SOT-5X3	Bidirectional	24 Mbps	Surface Mount
Texas Instruments TXS0101DCKT	2.3 V	5.5 V	85 °C	-40 °C	Open Drain Push-Pull	1	Auto-Direction Sensing	Voltage Level	1.65 V	3.6 V	1	6-TSSOP SC-88 SOT-363	SC-70-6	Bidirectional	24 Mbps	Surface Mount

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Cut Tape (CT)	1	$ 0.83
		10	$ 0.74
		25	$ 0.70
		100	$ 0.58
	Digi-Reel®	1	$ 0.83
		10	$ 0.74
		25	$ 0.70
		100	$ 0.58
	Tape & Reel (TR)	250	$ 0.54
		500	$ 0.48
		1250	$ 0.44
Texas Instruments	SMALL T&R	1	$ 0.87
		100	$ 0.67
		250	$ 0.49
		1000	$ 0.35

Description

General part information

TXS0101 Series

This one-bit non-inverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.65V to 3.6V. VCCA must be less than or equal to VCCB . The B port is designed to track VCCB. VCCB accepts any supply voltage from 2.3V to 5.5V. This allows for low voltage bidirectional translation between any of the 1.8V, 2.5V, 3.3V, and 5V voltage nodes.

When the output-enable (OE) input is low, all outputs are placed in the high-impedance state.

To put the device in the high-impedance state during power up or power down, tie OE to GND through a pull-down resistor; the current-sourcing capability of the driver determines the minimum value of the resistor.