The SPV1050 is an ultralow power and high-efficiency energy harvester and battery charger, which implements the MPPT function and integrates the switching elements of a buck-boost converter.The SPV1050 device allows the charge of any battery, including the thin film batteries, by tightly monitoring the end-of-charge and the minimum battery voltage in order to avoid the overdischarge and to preserve the battery life.The power manager is suitable for both PV cells and TEG harvesting sources, as it covers the input voltage range from 75 mV up to 18 V and guarantees high efficiency in both buck-boost and boost configuration.Furthermore the SPV1050 device shows very high flexibility thanks also to the trimming capability of the end-of-charge and undervoltage protection voltages. In such way any source and battery is matched.The MPPT is programmable by a resistor input divider and allows maximizing the source power under any temperature and irradiance condition.An unregulated voltage output is available (e.g. to supply a microcontroller), while two fully independent LDOs are embedded for powering sensors and RF transceivers. Both LDOs (1.8 V and 3.3 V) can be independently enabled through two dedicated pins.Transformerless thermoelectric generators and PV modules energy harvesterHigh efficiency for any harvesting sourceUp to 70 mA maximum battery charging currentFully integrated buck-boost DC-DC converterProgrammable MPPT by external resistors2.6 V to 5.3 V trimmable battery charge voltage level (± 1% accuracy)2.2 V to 3.6 V trimmable battery discharge voltage level (± 1% accuracy)Two fully independent LDOs (1.8 V and 3.3 V output)Enable/disable LDO control pinsBattery disconnect function for battery protectionBattery connected and ongoing charge logic open drain indication pins