TPS40190DRCR
Active4.5-V TO 15-V, 20-A SYNCHRONOUS BUCK CONTROLLER
Deep-Dive with AI
Search across all available documentation for this part.
TPS40190DRCR
Active4.5-V TO 15-V, 20-A SYNCHRONOUS BUCK CONTROLLER
Technical Specifications
Parameters and characteristics for this part
| Specification | TPS40190DRCR |
|---|---|
| Clock Sync | False |
| Control Features | Enable |
| Frequency - Switching | 300 kHz |
| Function | Step-Down |
| Mounting Type | Surface Mount |
| Number of Outputs | 1 |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Output Configuration | Positive |
| Output Phases | 1 |
| Output Type | Transistor Driver |
| Package / Case | 10-VFDFN Exposed Pad |
| Supplier Device Package | 10-VSON (3x3) |
| Synchronous Rectifier | True |
| Topology | Buck |
| Voltage - Supply (Vcc/Vdd) [Max] | 15 V |
| Voltage - Supply (Vcc/Vdd) [Min] | 4.5 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 2.60 | |
| 10 | $ 2.33 | |||
| 25 | $ 2.20 | |||
| 100 | $ 1.87 | |||
| 250 | $ 1.76 | |||
| 500 | $ 1.54 | |||
| 1000 | $ 1.28 | |||
| Digi-Reel® | 1 | $ 2.60 | ||
| 10 | $ 2.33 | |||
| 25 | $ 2.20 | |||
| 100 | $ 1.87 | |||
| 250 | $ 1.76 | |||
| 500 | $ 1.54 | |||
| 1000 | $ 1.28 | |||
| Tape & Reel (TR) | 3000 | $ 0.84 | ||
| 6000 | $ 0.80 | |||
| 9000 | $ 0.78 | |||
| Texas Instruments | LARGE T&R | 1 | $ 1.35 | |
| 100 | $ 1.12 | |||
| 250 | $ 0.80 | |||
| 1000 | $ 0.60 | |||
Description
General part information
TPS40190 Series
The TPS40190 is a cost-optimized synchronous buck controller that operates from 4.5 V to 15 V nominally, and implements a fixed frequency voltage mode power supply. The controller uses an adaptive anti-cross conduction scheme to prevent both the high-side and the rectifier MOSFET to be turned on at the same time, preventing shoot through current in the two MOSFETs.
The controller also provides a short circuit protection threshold that is user selectable between one of three values. The protection level is set with a single external resistor connected from COMP to GND. During start-up, the impedance connected to COMP is sensed, and the information is decoded to select one of the three thresholds. When the controller senses an output short circuit, both MOSFETs are turned off and a timeout period is observed before attempting to restart. This provides limited power dissipation in the event of a sustained fault.
The TPS40190 provides strong drivers to minimize switching losses in the power stage, reducing heat build up in the MOSFETs and allowing larger MOSFETs to be used without undue switching time penalty.
Documents
Technical documentation and resources
