Catalog
4.5-V to 15-V, 20-A synchronous buck controller
Key Features
• Input Operating Voltage Range: 4.5 V to 15 VReference 0.591 V ±1%Voltage Mode ControlInternal 5-V Regulator For Internal Housekeeping, Driver Power and Light External LoadsSelectable Short-Circuit Protection ThresholdsPre-Bias Ouput SafeFixed Switching Frequency of 300 kHzInternal Soft StartSmall 3 mm × 3 mm, 10-Pin SON PackageBootstrapped Drivers for N-Channel MOSFETAdaptive Anti-Cross ConductionInternal Bootstrap Diode1.2-A Drivers for Decreased Switching LossInput Operating Voltage Range: 4.5 V to 15 VReference 0.591 V ±1%Voltage Mode ControlInternal 5-V Regulator For Internal Housekeeping, Driver Power and Light External LoadsSelectable Short-Circuit Protection ThresholdsPre-Bias Ouput SafeFixed Switching Frequency of 300 kHzInternal Soft StartSmall 3 mm × 3 mm, 10-Pin SON PackageBootstrapped Drivers for N-Channel MOSFETAdaptive Anti-Cross ConductionInternal Bootstrap Diode1.2-A Drivers for Decreased Switching Loss
Description
AI
The TPS40190 is a cost-optimized synchronous buck controller that operates from 4.5 V to 15 V nominally, and implements a fixed frequency voltage mode power supply. The controller uses an adaptive anti-cross conduction scheme to prevent both the high-side and the rectifier MOSFET to be turned on at the same time, preventing shoot through current in the two MOSFETs.
The controller also provides a short circuit protection threshold that is user selectable between one of three values. The protection level is set with a single external resistor connected from COMP to GND. During start-up, the impedance connected to COMP is sensed, and the information is decoded to select one of the three thresholds. When the controller senses an output short circuit, both MOSFETs are turned off and a timeout period is observed before attempting to restart. This provides limited power dissipation in the event of a sustained fault.
The TPS40190 provides strong drivers to minimize switching losses in the power stage, reducing heat build up in the MOSFETs and allowing larger MOSFETs to be used without undue switching time penalty.
The TPS40190 is a cost-optimized synchronous buck controller that operates from 4.5 V to 15 V nominally, and implements a fixed frequency voltage mode power supply. The controller uses an adaptive anti-cross conduction scheme to prevent both the high-side and the rectifier MOSFET to be turned on at the same time, preventing shoot through current in the two MOSFETs.
The controller also provides a short circuit protection threshold that is user selectable between one of three values. The protection level is set with a single external resistor connected from COMP to GND. During start-up, the impedance connected to COMP is sensed, and the information is decoded to select one of the three thresholds. When the controller senses an output short circuit, both MOSFETs are turned off and a timeout period is observed before attempting to restart. This provides limited power dissipation in the event of a sustained fault.
The TPS40190 provides strong drivers to minimize switching losses in the power stage, reducing heat build up in the MOSFETs and allowing larger MOSFETs to be used without undue switching time penalty.
