ADM485ARMZ-REEL7
Active5 V, LOW POWER, 5 MBPS, HALF DUPLEX EIA RS-485 TRANSCEIVER
Deep-Dive with AI
Search across all available documentation for this part.
ADM485ARMZ-REEL7
Active5 V, LOW POWER, 5 MBPS, HALF DUPLEX EIA RS-485 TRANSCEIVER
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | ADM485ARMZ-REEL7 |
|---|---|
| Data Rate | 5 MBd |
| Duplex | Half |
| Mounting Type | Surface Mount |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Package / Case | 8-MSOP, 8-TSSOP |
| Package / Case | 3 mm |
| Package / Case [custom] | 0.118 in |
| Protocol | RS422, RS485 |
| Receiver Hysteresis | 70 mV |
| Supplier Device Package | 8-MSOP |
| Type | Transceiver |
| Voltage - Supply [Max] | 5.25 V |
| Voltage - Supply [Min] | 4.75 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 4.84 | |
| 10 | $ 3.22 | |||
| 25 | $ 2.80 | |||
| 100 | $ 2.33 | |||
| 250 | $ 2.10 | |||
| 500 | $ 1.96 | |||
| Digi-Reel® | 1 | $ 4.84 | ||
| 10 | $ 3.22 | |||
| 25 | $ 2.80 | |||
| 100 | $ 2.33 | |||
| 250 | $ 2.10 | |||
| 500 | $ 1.96 | |||
| Tape & Reel (TR) | 1000 | $ 1.84 | ||
| 2000 | $ 1.75 | |||
| 3000 | $ 1.70 | |||
| 5000 | $ 1.65 | |||
Description
General part information
ADM485E Series
The ADM485E /ADM487E/ADM1487Eare 5 V low power data transceivers with ±15 kV ESD protection suitable for half duplex communication on multipoint bus transmission lines. They are designed for balanced data transmission and comply with TIA/EIA standards RS-485 and RS-422. The ADM487E and the ADM1487E have a 1/4 unit load receiver input impedance that allows up to 128 transceivers on a bus, while the ADM485E allow up to 32 transceivers on a bus. Since only one driver is enabled at any time, the output of a disabled or powerdown driver is three-stated to avoid overloading the bus.The driver outputs are slew rate-limited in order to reduce EMI and data errors caused by reflections from improperly terminated buses. Excessive power dissipation caused by bus contention or output shorting is prevented with a thermal shutdown circuit. The parts are fully specified over the industrial temperature ranges and are available in 8-lead SOIC packagesAPPLICATIONSEnergy/power meteringLighting systemsIndustrial controlTelecommunicationsSecurity systemsInstrumentation
Documents
Technical documentation and resources
