
AD7998BRUZ-0
Active8-CHANNEL, 12-BIT ADC WITH I2C COMPATIBLE INTERFACE IN 20-LEAD TSSOP
Deep-Dive with AI
Search across all available documentation for this part.

AD7998BRUZ-0
Active8-CHANNEL, 12-BIT ADC WITH I2C COMPATIBLE INTERFACE IN 20-LEAD TSSOP
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | AD7998BRUZ-0 |
|---|---|
| Architecture | SAR |
| Configuration | MUX-S/H-ADC |
| Data Interface | I2C |
| Input Type | Single Ended |
| Mounting Type | Surface Mount |
| Number of A/D Converters | 1 |
| Number of Bits | 12 bits |
| Number of Inputs | 8 |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Package / Case | 20-TSSOP |
| Package / Case [x] | 0.173 in |
| Package / Case [y] | 4.4 mm |
| Ratio - S/H:ADC | 1:1 |
| Reference Type | External |
| Sampling Rate (Per Second) | 188 k per second |
| Supplier Device Package | 20-TSSOP |
| Voltage - Supply, Analog [Max] | 5.5 V |
| Voltage - Supply, Analog [Min] | 2.7 V |
| Voltage - Supply, Digital [Max] | 5.5 V |
| Voltage - Supply, Digital [Min] | 2.7 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Tube | 1 | $ 14.98 | |
| 10 | $ 10.44 | |||
| 75 | $ 8.16 | |||
| 150 | $ 7.85 | |||
Description
General part information
AD7998 Series
TheAD7997/ AD7998 are 8-channel, 10- and 12-bit, low power, successive approximation ADCs with an I2C-compatible interface. The parts operate from a single 2.7 V to 5.5 V power supply and feature a 2 µs conversion time. The parts contain an 8-channel multiplexer and track-and-hold amplifier that can handle input frequencies up to 11 MHz.The AD7997 / AD7998 provide a 2-wire serial interface that is compatible with I2C interfaces. Each part comes in two versions, AD7997-0 / AD7998-0 and AD7997-1 / AD7998-1, and each version allows at least two different I2C addresses. The I2C interface on the AD7997-0/AD7998-0 supports standard and fast I2C interface modes. The I2C interface on the AD7997-1 / AD7998-1 supports standard, fast, and high speed I2C interface modes.The AD7997 / AD7998 normally remain in a shutdown state while not converting, and power up only for conversions. The conversion process can be controlled using theCONVSTpin, by a command mode where conversions occur across I2C write operations or an automatic conversion interval mode selected through software control.The AD7997 / AD7998 require an external reference that should be applied to the REFINpin and can be in the range of 1.2 V to VDD. This allows the widest dynamic input range to the ADC.On-chip limit registers can be programmed with high and low limits for the conversion result, and an open-drain, out-of-range indicator output (ALERT) becomes active when the programmed high or low limits are violated by the conversion result. This output can be used as an interrupt.PRODUCT HIGHLIGHTS2 µs conversion time with low power consumption.I2C-compatible serial interface with pin-selectable addresses. Two AD7997/AD7998 versions allow five AD7997/AD7998 devices to be connected to the same serial bus.The parts feature automatic shutdown while not converting to maximize power efficiency. Current consumption is 1 µA max when in shutdown mode at 3V.Reference can be driven up to the power supply.Out-of-range indicator that can be software disabled or enabled.One-shot and automatic conversion rates.Registers store minimum and maximum conversion results.
Documents
Technical documentation and resources