SN74ALVCHR16601VR
Active18-BIT UNIVERSAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS
Deep-Dive with AI
Search across all available documentation for this part.
SN74ALVCHR16601VR
Active18-BIT UNIVERSAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | SN74ALVCHR16601VR |
|---|---|
| Current - Output High, Low [custom] | 12 mA |
| Current - Output High, Low [custom] | 12 mA |
| Mounting Type | Surface Mount |
| Number of Circuits | 18 Bit |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Package / Case | 0.173 in |
| Package / Case | 56-TFSOP |
| Package / Case [y] | 4.4 mm |
| Supplier Device Package | 56-TVSOP |
| Voltage - Supply [Max] | 3.6 V |
| Voltage - Supply [Min] | 1.65 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 2.88 | |
| Digi-Reel® | 1 | $ 2.88 | ||
| Tape & Reel (TR) | 2000 | $ 1.32 | ||
| 6000 | $ 1.27 | |||
| Texas Instruments | LARGE T&R | 1 | $ 2.17 | |
| 100 | $ 1.79 | |||
| 250 | $ 1.29 | |||
| 1000 | $ 0.97 | |||
Description
General part information
SN74ALVCHR16601 Series
This 18-bit universal bus transceiver is designed for 1.65-V to 3.6-V VCCoperation.
The SN74ALVCHR16601 combines D-type latches and D-type flip-flops to allow data flow in transparent, latched, clocked, and clock-enabled modes.
Data flow in each direction is controlled by output-enable (OEAB\ and OEBA\), latch-enable (LEAB and LEBA), and clock (CLKAB and CLKBA) inputs. The clock can be controlled by the clock-enable (CLKENAB\ and CLKENBA\) inputs. For A-to-B data flow, the device operates in the transparent mode when LEAB is high. When LEAB is low, the A data is latched if CLKAB is held at a high or low logic level. If LEAB is low, the A data is stored in the latch/flip-flop on the low-to-high transition of CLKAB. When OEAB\ is low, the outputs are active. When OEAB\ is high, the outputs are in the high-impedance state.
Documents
Technical documentation and resources
