
Deep-Dive with AI
Search across all available documentation for this part.

Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | ADG413BRUZ |
|---|---|
| Channel Capacitance (CS(off), CD(off)) [custom] | 9 pF |
| Channel Capacitance (CS(off), CD(off)) [custom] | 9 pF |
| Charge Injection | 5 pC |
| Crosstalk | -85 dB |
| Current - Leakage (IS(off)) (Max) [Max] | 250 pA |
| Mounting Type | Surface Mount |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Number of Circuits | 4 |
| On-State Resistance (Max) [Max] | 35 Ohm |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Package / Case | 16-TSSOP |
| Package / Case [x] | 0.173 in |
| Package / Case [y] | 4.4 mm |
| Supplier Device Package | 16-TSSOP |
| Switch Circuit | SPST - NO/NC |
| Switch Time (Ton, Toff) (Max) [custom] | 145 ns |
| Switch Time (Ton, Toff) (Max) [custom] | 175 ns |
| Voltage - Supply, Dual (V±) [Max] | 15 V |
| Voltage - Supply, Dual (V±) [Min] | -15 V |
| Voltage - Supply, Single (V+) | 12 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Tube | 1 | $ 9.82 | |
| 10 | $ 6.82 | |||
| 25 | $ 6.04 | |||
| 100 | $ 5.17 | |||
| 250 | $ 4.75 | |||
| 500 | $ 4.50 | |||
| 1000 | $ 4.29 | |||
Description
General part information
ADG413 Series
The ADG413 is a monolithic CMOS device comprising four independently selectable switches. It is designed on an enhanced LC2MOS process which provides low power dissipation yet gives high switching speed and low on resistance.The ADG413 has two switches that are turned on with a logic high on the appropriate control inputs while the logic is inverted on the other two switches. Each switch conducts equally well in both directions when ON and each has an input signal range that extends to the supplies. All switches exhibit break-before-make switching action for use in multiplexer applications. Inherent in the design is low charge injection for minimum transients when switching the digital inputs.
Documents
Technical documentation and resources