MIC2536-2YM
ActiveUSB POWER SW HI SIDE/DIST DUAL 2.7V TO 5.5V 0.275A 8-PIN SOP TUBE
Deep-Dive with AI
Search across all available documentation for this part.
MIC2536-2YM
ActiveUSB POWER SW HI SIDE/DIST DUAL 2.7V TO 5.5V 0.275A 8-PIN SOP TUBE
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | MIC2536-2YM |
|---|---|
| Current - Output (Max) [Max] | 150 mA |
| Fault Protection | Over Temperature, Reverse Current, Current Limiting (Fixed) |
| Features | Slew Rate Controlled, Status Flag |
| Input Type | Non-Inverting |
| Interface | On/Off |
| Mounting Type | Surface Mount |
| Number of Outputs | 2 |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Output Configuration | High Side |
| Output Type | N-Channel |
| Package / Case | 8-SOIC |
| Package / Case [x] | 0.154 in |
| Package / Case [y] | 3.9 mm |
| Ratio - Input:Output [custom] | 1:2 |
| Rds On (Typ) | 400 mOhm |
| Supplier Device Package | 8-SOIC |
| Switch Type | USB Switch |
| Voltage - Load [Max] | 5.5 V |
| Voltage - Load [Min] | 2.7 V |
| Voltage - Supply (Vcc/Vdd) | False |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Tube | 1 | $ 1.52 | |
| 25 | $ 1.27 | |||
| 100 | $ 1.15 | |||
| Microchip Direct | TUBE | 1 | $ 1.52 | |
| 25 | $ 1.27 | |||
| 100 | $ 1.15 | |||
| 1000 | $ 1.12 | |||
| 5000 | $ 1.11 | |||
| Newark | Each | 100 | $ 1.19 | |
Description
General part information
MIC2536 Series
The MIC2536 is a cost-effective high-side power switch, with two independently controlled channels, optimized for buspowered Universal Serial Bus (USB) applications. Few external components are necessary to satisfy USB requirements.
Each switch channel of the MIC2536 will supply up to 100mA as required for USB bus-powered downstream devices. Fault current is limited to typically 275mA by fast-acting currentlimit circuitry which minimizes voltage droop on the upstream port during fault conditions. A flag output with transient filter indicates fault conditions to the local USB controller but will ignore short flag signals resulting from inrush current during hot plug-in events.
Soft start eliminates the momentary voltage droop on other ports that may occur when the switch is enabled in buspowered applications. Additional features include thermal shutdown to prevent catastrophic switch failure from highcurrent loads and 3.3V and 5V logic compatible enable inputs.
Documents
Technical documentation and resources
