
VBG08HTR-E
ActiveIGNITION COIL DRIVER POWER IC 7-PIN HPAK + 1 T/R
Deep-Dive with AI
Search across all available documentation for this part.

VBG08HTR-E
ActiveIGNITION COIL DRIVER POWER IC 7-PIN HPAK + 1 T/R
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | VBG08HTR-E |
|---|---|
| Current - Output (Max) [Max] | 8 A |
| Fault Protection | Over Voltage, Over Temperature |
| Features | Status Flag |
| Input Type | Non-Inverting |
| Interface | On/Off |
| Mounting Type | Surface Mount |
| Number of Outputs | 1 |
| Operating Temperature [Max] | 150 °C |
| Operating Temperature [Min] | -40 °C |
| Output Configuration | Low Side |
| Package / Case | OctaPAK (7 Leads + Tab) |
| Ratio - Input:Output | 1:1 |
| Supplier Device Package | OctaPAK 7+1 |
| Switch Type | General Purpose |
| Voltage - Load [Max] | 40 V |
| Voltage - Load [Min] | 6 V |
| Voltage - Supply (Vcc/Vdd) | Not Required |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | N/A | 0 | $ 0.00 | |
Description
General part information
VBG08 Series
VBG08H is a single channel driver, plus an IGBT power stage internally assembled using Chip On Chip (COC) hybrid technology.The two chips are assembled together in the OctaPAK package.The device comes with several built-in protections like a coil current limiter, thermal monitoring circuit, which triggers a Soft Shut Down (SSD) as soon as the maximum allowable temperature is reached (TSD). It avoids extra voltage on the secondary side of the coil transformer.The Slow Turn On circuit (STO), avoids unwanted sparks during first negative dV/dt of HVC voltage at turn on.The current flag circuit provides an output logical signal voltage when the coil current reaches a fixed threshold.Smart electronic ignition with embedded IGBT power stageCoil current limiterCurrent threshold flag diagnostic outputEnable pinSlow turn-onSoft shut down (SSD) operated by low voltage clamp circuit (LVC)SSD activated byThermal intervention (Tj> 150°C)Enable pinInput overvoltageBattery overvoltageBattery fault tolerant pinsESD protectedTTL compatible
Documents
Technical documentation and resources