TPS54561DPRR
ActiveCONV DC-DC 4.5V TO 60V STEP DOWN SINGLE-OUT 0.8V TO 59V 5A 10-PIN WSON EP T/R
Deep-Dive with AI
Search across all available documentation for this part.
TPS54561DPRR
ActiveCONV DC-DC 4.5V TO 60V STEP DOWN SINGLE-OUT 0.8V TO 59V 5A 10-PIN WSON EP T/R
Technical Specifications
Parameters and characteristics for this part
| Specification | TPS54561DPRR |
|---|---|
| Current - Output | 5 A |
| Frequency - Switching [Max] | 2.5 MHz |
| Frequency - Switching [Min] | 100 kHz |
| Function | Step-Down |
| Mounting Type | Surface Mount |
| Number of Outputs | 1 |
| Operating Temperature [Max] | 150 °C |
| Operating Temperature [Min] | -40 °C |
| Output Configuration | Positive |
| Output Type | Adjustable |
| Package / Case | 10-WDFN Exposed Pad |
| Supplier Device Package | 10-WSON (4x4) |
| Synchronous Rectifier | False |
| Topology | Buck |
| Voltage - Input (Max) [Max] | 60 V |
| Voltage - Input (Min) [Min] | 4.5 V |
| Voltage - Output (Max) [Max] | 59 V |
| Voltage - Output (Min/Fixed) | 0.8 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 5.96 | |
| 10 | $ 5.35 | |||
| 25 | $ 5.06 | |||
| 100 | $ 4.38 | |||
| 250 | $ 4.16 | |||
| 500 | $ 3.73 | |||
| 1000 | $ 3.15 | |||
| Digi-Reel® | 1 | $ 5.96 | ||
| 10 | $ 5.35 | |||
| 25 | $ 5.06 | |||
| 100 | $ 4.38 | |||
| 250 | $ 4.16 | |||
| 500 | $ 3.73 | |||
| 1000 | $ 3.15 | |||
| Tape & Reel (TR) | 3000 | $ 2.99 | ||
| Texas Instruments | LARGE T&R | 1 | $ 4.10 | |
| 100 | $ 3.34 | |||
| 250 | $ 2.62 | |||
| 1000 | $ 2.23 | |||
Description
General part information
TPS54561-Q1 Series
The TPS54561-Q1 device is a 60-V, 5-A, step-down regulator with an integrated high-side MOSFET. The device survives load dump pulses up to 65 V per ISO7637. Current-mode control provides simple external compensation and flexible component selection. A low-ripple pulse-skip mode and 152-µA supply current enables high efficiency at light loads. Pulling the enable pin low reduces shutdown supply current to 2 µA.
Undervoltage lockout has an internal 4.3-V setting. Use of an external resistor divider at the EN pin can increase the setting. The soft-start pin controls the output-voltage start-up ramp and also configures sequencing or tracking. An open-drain power-good signal indicates the output is within 93% to 106% of its nominal voltage.
A wide adjustable switching-frequency range allows optimization for either efficiency or external component size. Cycle-by-cycle current limit, frequency foldback, and thermal shutdown protect the device during an overload condition.
Documents
Technical documentation and resources
